project/bcm63xx/u-boot.git
2015-06-09 Soeren Mochtbs2910: add thermal support
2015-06-09 Marek Vasutimx6: novena: Reinstate missing CONFIG_FAT_WRITE
2015-06-09 Chris Kuethepatch - arm - define SYS_CACHELINE_SIZE for mx5
2015-06-08 Tom RiniPrepare v2015.07-rc2
2015-06-08 Adam YH Leepepper: Implement Board Detection mechanism
2015-06-08 Stefan Roeseautoboot.c: Add feature to stop autobooting via SHA256...
2015-06-08 Stefan Roeseautoboot.c: Move config options to Kconfig
2015-06-08 Stefan Roeseautoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG...
2015-06-08 Stefan RoeseKconfig: Enable usage of escape char '\' in string...
2015-06-08 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-imx
2015-06-08 Stefano Babicimx: drop warning: unused variable 'max_freq'
2015-06-08 Christian Gmeinerot1200: setup i2c bus 1 in setup_iomux_i2c()
2015-06-08 Christian Gmeinerot1200: setup i2c bus in board_early_init_f(..)
2015-06-08 Sanchayan Maitycolibri_vf: Enable board specific USB initialisation...
2015-06-08 Sanchayan Maityusb: ehci-vf: Add weak function for board specific...
2015-06-08 Bhuvanchandra DVcolibri_vf: Add separate defconfig for device tree...
2015-06-08 Bhuvanchandra DVcolibri-vf: Enable SPI support
2015-06-08 Bhuvanchandra DVvf610: dts: Add device tree support
2015-06-08 Bhuvanchandra DVarm: vf610: Add iomux support for DSPI
2015-06-08 Bhuvanchandra DVarm: vf610: Add clock support for DSPI
2015-06-08 Bhuvanchandra DVcolibri_vf: Enable GPIO support
2015-06-08 Bhuvanchandra DVcolibri_vf: Add pinmux entries for GPIOs
2015-06-08 Bhuvanchandra DVdm: gpio: vf610: Add GPIO driver support
2015-06-08 Bhuvanchandra DVdm: gpio: uclass: Add flag to control sequence numbering
2015-06-08 Fabio Estevammx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL...
2015-06-08 Fabio Estevamwandboard: Add board revision detection support
2015-06-06 Hans de Goedeimage-fit: Fix compiler warning in fit_conf_print()
2015-06-06 Tom RiniMerge git://git.denx.de/u-boot-sunxi
2015-06-05 Hans de Goedesunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR...
2015-06-05 Hans de Goedesunxi: Add a proper dts file for the ga10h a33 based...
2015-06-05 Tom RiniMerge git://git.denx.de/u-boot-fdt
2015-06-05 Tom RiniMerge git://git.denx.de/u-boot-dm
2015-06-05 Paul Kocialkowskifdt: Documentation for a few support functions aside...
2015-06-05 Paul Kocialkowskifdt: Pass the device serial number through devicetree
2015-06-04 Hans de Goedesunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kerne...
2015-06-04 Hans de Goedesunxi: Sync dts files with the linux kernel
2015-06-04 Hans de Goedesunxi: gpio: Add "allwinner,sun8i-a33-pinctrl"
2015-06-04 Hans de Goedesunxi: Add new Mele_A1000G_quad defconfig
2015-06-04 Hans de Goedesunxi: usb_phy: Swap check for disconnect threshold
2015-06-04 Hans de Goedesunxi: mmc: Enable pull-up on card-detect gpio pin
2015-06-04 Masahiro Yamadagpio: fix typos in GPIO header
2015-06-04 Simon Glasssandbox: Compile test device tree when CONFIG_UT_DM...
2015-06-04 Simon Glasssandbox: dts: Add the real-time-clock test nodes back in
2015-06-04 Simon Glasssandbox: dts: Sort the sandbox.dts file
2015-06-04 Simon Glasssandbox: dts: Sort the test.dts file a little
2015-06-04 Simon Glassdm: Sort the uclass IDs after the tegra/PMIC addition
2015-06-04 Simon Glassdm: pci: Allow PCI bus numbering aliases
2015-06-04 Simon Glasssandbox: Tidy up terminal restore
2015-06-04 Gabriel Huaux86: minnowmax: initialize the pin-muxing from device...
2015-06-04 Gabriel Huaux86: gpio: add pinctrl support from the device tree
2015-06-04 Andrew Bradfordx86: baytrail: pci region 3 is not always mapped to...
2015-06-04 Bin Mengx86: qemu: Implement PIRQ routing
2015-06-04 Bin Mengx86: coreboot: Control I/O port 0xb2 writing via device...
2015-06-04 Bin Mengx86: qemu: Create separate i440fx and q35 device trees
2015-06-04 Bin Mengx86: coreboot: Fix cosmetic issues
2015-06-04 Bin Mengx86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP
2015-06-04 Bin Mengtools: ifdtool: Do not write region while its size...
2015-06-04 Bin Mengx86: qemu: Adjust VGA initialization
2015-06-04 Bin Mengx86: qemu: Enable legacy IDE I/O ports decode
2015-06-04 Bin Mengx86: qemu: Turn on legacy segments decode
2015-06-04 Bin Mengx86: qemu: Make host bridge (b.d.f=0.0.0) visible
2015-06-04 Andrew Bradfordx86: fsp_support: Correct high mem comment typo
2015-06-04 Bin Mengx86: Do sanity test on pirq table before writing
2015-06-04 Bin Mengx86: quark: Implement PIRQ routing
2015-06-04 Bin Mengx86: Document irq router device tree bindings
2015-06-04 Bin Mengx86: Refactor PIRQ routing support
2015-06-04 Bin Mengx86: qemu: Add ATA/SATA support
2015-06-04 Bin Mengx86: Add CONFIG_LBA48 and remove CONFIG_ATAPI in x86...
2015-06-04 Bin Mengcmd_ide: Eliminate build warnings in atapi_inquiry()
2015-06-04 Bin Mengpci: Do not skip legacy IDE device configuration
2015-06-04 Bin Mengpci: Allow debug message output in pci_auto.c
2015-06-04 Bin Mengx86: qemu: Add graphics support
2015-06-04 Bin Mengx86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig
2015-06-04 Bin Mengvideo: Kconfig: Make VESA driver avaiable for non-x86...
2015-06-04 Bin Mengx86: Remove DECLARE_GLOBAL_DATA_PTR in board files
2015-06-04 Bin Mengx86: Update README.x86 for QEMU support
2015-06-04 Bin Mengx86: Change coreboot default build configuration to...
2015-06-04 Bin Mengx86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86...
2015-06-04 Bin Mengx86: Make QEMU the default vendor
2015-06-04 Bin Mengx86: Support QEMU x86 targets
2015-06-04 Bin Mengpci: Move pci_hose_phys_to_bus() to pci_common.c
2015-06-02 Hannes Schmelzerboard/BuR/common: fix netconsole
2015-06-02 Lars Poeschelconfigs: remove CONFIG_NET_MULTI
2015-06-02 Lars PoeschelARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ
2015-06-02 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-net
2015-06-01 Michal Simeknet: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 Joe Hershbergernet: Move the CMD_NET config to defconfigs
2015-06-01 Joe HershbergerMove setexpr to Kconfig
2015-06-01 Masahiro Yamadablackfin: fix build error on bct-brettl2 board
2015-06-01 Masahiro Yamadasparc: fix build error on gr_ep2s60 board
2015-06-01 Tom RiniMerge branch 'rmobile' of git://git.denx.de/u-boot-sh
2015-06-01 Markus Niebelarm: mx6: tqma6: use default CONFIG_SYS_PBSIZE
2015-06-01 Markus Niebelarm: mx6: tqma6: fix spelling error in condition
2015-06-01 Tim Harveyimx: ventana: skip mtdparts fixup if no flash
2015-06-01 Tim Harveyimx: ventana: hang if board model could not be determined
2015-06-01 Tim Harveyimx: ventana: make fdt_file1 and fdt_file2 automatic...
2015-06-01 Tim Harveyimx: ventana: make model env var automatic and non...
2015-06-01 Tim Harveyimx: ventana: various board-specific GPIO config updates
2015-06-01 Stefan Wahrenmxs: Do not disable bo detection when DC-DC is already...
2015-05-31 Nobuhiro Iwamatsuarm: rmobile: alt: Update to QoS revision 0.31 and...
next