project/bcm63xx/u-boot.git
2019-04-13 Anatolij Gustschinimx6: wandboard: convert to DM_VIDEO
2019-04-13 Anatolij Gustschinimx6: wandboard: convert to DM_USB
2019-04-13 Anatolij Gustschinimx6: wandboard: convert to DM_GPIO and enable pinctrl...
2019-04-13 Anatolij Gustschinimx6: wandboard: add device tree
2019-04-13 Anatolij Gustschinmx6sabreauto: convert to DM_VIDEO
2019-04-13 Anatolij Gustschinmx6sabresd: convert to DM_VIDEO
2019-04-13 Anatolij Gustschincolibri_imx6: convert to DM_VIDEO
2019-04-13 Anatolij Gustschinimx6: ge_bx50v3: convert to DM_VIDEO
2019-04-13 Anatolij Gustschinimx6: icore: convert to DM_VIDEO
2019-04-13 Anatolij Gustschinapalis_imx6: convert to DM_VIDEO
2019-04-13 Anatolij Gustschinimx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu...
2019-04-13 Anatolij Gustschinimx: move CONFIG_VIDEO_IPUV3 to defconfigs
2019-04-13 Anatolij Gustschinvideo: move ipuv3 files to subdirectory
2019-04-13 Anatolij Gustschinvideo: ipuv3: add DM_VIDEO support
2019-04-13 Soeren Mochboard: tbs2910: Convert mmc to driver model
2019-04-13 Soeren Mochboard: tbs2910: Convert sata to ahci driver model
2019-04-13 Soeren Mochata: dwc_ahsata: Add ahci driver model support
2019-04-13 Soeren Mochata: dwc_ahsata: Fix sector reports for large disks
2019-04-13 Soeren Mochboard: tbs2910: Convert i2c and rtc to driver model
2019-04-13 Soeren Mochboard: tbs2910: Convert usb to driver model
2019-04-13 Soeren Mochboard: tbs2910: Add pinctrl driver and convert gpio...
2019-04-13 Soeren Mochboard: tbs2910: Add device tree
2019-04-13 Soeren Mochboard: tbs2910: Remove efi loader support in defconfig...
2019-04-13 Gerard Salvatellaboard: colibri_imx6: check for and report ecc errors...
2019-04-13 Gerard Salvatellacolibri_imx6: added nreset gpio on reboot
2019-04-13 Bhuvanchandra DVcolibri_imx6: switch to zimage
2019-04-13 Stefan Agnercolibri_imx6: use SDP if USB serial downloader has...
2019-04-13 Sanchayan Maityconfigs: colibri_imx6: Use ext4 file system by default
2019-04-13 Bhuvanchandra DVtoradex: colibri_imx6: overwrite CMA memory set in...
2019-04-13 Max Krummenachercolibri_imx6: revert fuse value set in mfgr_fuse
2019-04-13 Max Krummenachercolibri_imx6: change pmic fusing according to hw 1...
2019-04-13 Max Krummenachercolibri imx6: disable ri and dcd irq in uarts
2019-04-13 Max Krummenachercolibri imx6: pf0100: reorder and cleanup message printing
2019-04-13 Max Krummenachercolibri_imx6: unify sd/mmc drive strenght with linux...
2019-04-13 Stefan Agnercolibri_imx6: add distroboot support
2019-04-13 Max Krummenachercolibri_imx6: print also 64-bit IT
2019-04-13 Max Krummenachercolibri_imx6: drop CONFIG_OF_SYSTEM_SETUP
2019-04-13 Marcel Ziswilercolibri_imx6: migrate usb to using driver model
2019-04-13 Marcel Ziswilercolibri_imx6: migrate mmc to using driver model
2019-04-13 Marcel Ziswilercolibri_imx6: migrate pmic and regulator to using drive...
2019-04-13 Marcel Ziswilercolibri_imx6: migrate i2c to using driver model
2019-04-13 Marcel Ziswilercolibri_imx6: enable pin control driver
2019-04-13 Marcel Ziswilercolibri_imx6: clean-up and migrate gpios to using drive...
2019-04-13 Marcel Ziswilercolibri_imx6: migrate to using device tree
2019-04-13 Marcel Ziswilercolibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE...
2019-04-13 Marcel Ziswilercolibri_imx6: enable fit image, gpt, imx thermal, efi...
2019-04-13 Marcel Ziswilercolibri_imx6: move console in env from header file...
2019-04-13 Marcel Ziswilercolibri_imx6: use distro defaults
2019-04-13 Marcel Ziswilercolibri_imx6: get rid of obsolete nospl configurations
2019-04-13 Gerard Salvatellaboard: apalis_imx6: check for and report ecc errors...
2019-04-13 Marcel Ziswilerapalis_imx6: switch to zimage
2019-04-13 Stefan Agnerapalis_imx6: use SDP if USB serial downloader has been...
2019-04-13 Sanchayan Maityconfigs: apalis_imx6: Use ext4 file system by default
2019-04-13 Max Krummenacherapalis_imx6: revert fuse value set in mfgr_fuse
2019-04-13 Max Krummenacherapalis_imx6: disable ri and dcd irq in uarts
2019-04-13 Marcel Ziswilerapalis_imx6: pf0100: reorder and cleanup message printing
2019-04-13 Max Krummenacherapalis_imx6: unify sd/mmc drive strength with linux...
2019-04-13 Max Krummenacherapalis_imx6: use both sd/mmc interfaces for setsdupdate
2019-04-13 Marcel Ziswilerapalis_imx6: add distroboot support
2019-04-13 Marcel Ziswilerapalis_imx6: drop CONFIG_OF_SYSTEM_SETUP
2019-04-13 Marcel Ziswilerapalis_imx6: migrate usb to using driver model
2019-04-13 Marcel Ziswilerapalis_imx6: migrate mmc and sata to using driver model
2019-04-13 Marcel Ziswilerapalis_imx6: migrate pmic and regulator to using driver...
2019-04-13 Marcel Ziswilerapalis_imx6: migrate i2c to using driver model
2019-04-13 Marcel Ziswilerapalis_imx6: enable pin control driver
2019-04-13 Marcel Ziswilerapalis_imx6: clean-up and migrate gpios to using driver...
2019-04-13 Marcel Ziswilerapalis_imx6: migrate to using device tree
2019-04-13 Marcel Ziswilerapalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE...
2019-04-13 Marcel Ziswilerapalis_imx6: enable fit image, gpt, imx thermal, efi...
2019-04-13 Marcel Ziswilerapalis_imx6: move console in env from header file to...
2019-04-13 Marcel Ziswilerapalis_imx6: use distro defaults
2019-04-13 Marcel Ziswilerapalis_imx6: get rid of obsolete nospl configurations
2019-04-13 Ian Raymx53ppd: fix unsupported set command
2019-04-13 Ian Raymx53ppd: bring dock out of reset at boot
2019-04-13 Joonas Aijalaboard: ge: bx50v3: Network booting of fitImage with...
2019-04-13 Joonas Aijalaboard: ge: bx50v3: Specific ARP timeout removed
2019-04-13 Ian Rayboard: ge: store version information in fdt
2019-04-13 Ian Rayboard: ge: ppd: Enable CONFIG_DM_MMC
2019-04-13 Ian Rayarm: imx: Add esdhc3/4 nodes to imx53.dtsi
2019-04-13 Ian Rayboard: ge: ppd: Enable CONFIG_DM
2019-04-13 Ian Rayboard: ge: bx50v3: Enable CONFIG_DM_SPI, CONFIG_DM_SPI_...
2019-04-13 Ian Rayboard: ge: bx50v3: Enable CONFIG_DM_GPIO
2019-04-13 Ian Rayboard: ge: bx50v3: Enable CONFIG_DM_MMC
2019-04-13 Ian Rayboard: ge: bx50v3: Enable CONFIG_DM
2019-04-13 Lukasz Majewskipcm052: bk4: Add board_phy_config() for BK4 to setup...
2019-04-13 Lukasz Majewskipcm052: mac: Provide board specific imx_get_mac_from_fu...
2019-04-13 Lukasz Majewskipcm052: board: Add code to setup LED default states
2019-04-13 Lukasz Majewskipcm052: bk4: sdcard: Add support for SD card booting...
2019-04-13 Lukasz Majewskiconfig: bk4: Update u-boot envs to support NOR memories...
2019-04-13 Lukasz Majewskiconfig: bk4: Update u-boot script to support recovery...
2019-04-13 Lukasz Majewskipcm052: board: Remove in-board setup code (it is now...
2019-04-13 Lukasz Majewskiconfig: bk4: Update include/configs/bk4r1.h file
2019-04-13 Lukasz Majewskiconfig: pcm052: Use SZ_X{MK} from linux/sizes.h for...
2019-04-13 Lukasz Majewskidefconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig...
2019-04-13 Lukasz MajewskiARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot...
2019-04-13 Lukasz MajewskiARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
2019-04-13 Lukasz Majewskipcm052: board: cosmetic: Add copyright notice to pcm052.c
2019-04-13 Lukasz MajewskiARM: DTS: vybrid: Update vf.dtsi file to descibe more...
2019-04-13 Lukasz Majewskipcm052: board: vybrid: Update the board name for BK4...
2019-04-13 Lukasz Majewskipcm052: board: Remove "m4go" command as it is supersede...
next