openwrt/staging/blogic.git
2015-08-28 Christoph Hellwigscsi_dh: move to drivers/scsi
2015-08-28 Christoph Hellwigdm-mpath, scsi_dh: request scsi_dh modules in scsi_dh...
2015-08-28 Christoph Hellwigdm-mpath, scsi_dh: don't let dm detach device handlers
2015-08-28 Hannes Reineckeaic94xx: Skip reading user settings if flash is not...
2015-08-28 Gabriel Krisman... ipr: Enable SIS pipe commands for SIS-32 devices.
2015-08-28 Gabriel Krisman... ipr: Inhibit underlength data check for AFDASD in raw...
2015-08-27 Sreekanth Reddympt3sas : Bump mpt3sas driver version to 9.100.00.00
2015-08-27 Sreekanth Reddympt3sas: When device is blocked followed by unblock...
2015-08-27 Sreekanth Reddympt3sas: Call dma_mapping_error() API after mapping...
2015-08-27 Sreekanth Reddympt3sas: Use alloc_ordered_workqueue() API instead...
2015-08-27 Sreekanth Reddympt3sas: Added support for customer specific branding
2015-08-27 Sreekanth Reddympt3sas: Return host busy error status to SML when...
2015-08-27 Sreekanth Reddympt3sas: Complete the SCSI command with DID_RESET statu...
2015-08-27 Sreekanth Reddympt3sas: MPI 2.5 Rev K (2.5.6) specifications
2015-08-27 Sreekanth Reddympt3sas: Bump mpt3sas driver version to v6.100.00.00
2015-08-27 Sreekanth Reddympt3sas: Add branding string support for OEM custom HBA
2015-08-27 Sreekanth Reddympt3sas: Add branding string support for OEM's HBA
2015-08-27 Sreekanth Reddympt3sas: MPI 2.5 Rev J (2.5.5) specification and 2...
2015-08-27 Sreekanth Reddympt3sas: Update MPI2 strings to MPI2.5
2015-08-27 Sreekanth Reddympt3sas: Bump mpt3sas Driver version to v5.100.00.00
2015-08-27 Sreekanth Reddympt3sas: Provides the physical location of sas drives
2015-08-27 Sreekanth Reddympt3sas: MPI 2.5 Rev I (2.5.4) specifications.
2015-08-27 Sreekanth Reddympt3sas: Remove redundancy code while freeing the contr...
2015-08-27 Sreekanth Reddympt3sas: Don't block the drive when drive addition...
2015-08-27 Sreekanth Reddympt3sas: Get IOC_FACTS information using handshake...
2015-08-27 Sreekanth Reddympt3sas: Added Combined Reply Queue feature to extend...
2015-08-27 Dan Carpenteraic94xx: set an error code on failure
2015-08-27 K. Y. Srinivasanstorvsc: Set the error code correctly in failure conditions
2015-08-27 Keith Mangestorvsc: Allow write_same when host is windows 10
2015-08-27 Keith Mangestorvsc: use storage protocol version to determine...
2015-08-27 Keith Mangestorvsc: use correct defaults for values determined...
2015-08-27 Keith Mangestorvsc: Untangle the storage protocol negotiation...
2015-08-27 Keith Mangestorvsc: Use a single value to track protocol versions
2015-08-27 Keith Mangestorvsc: Rather than look for sets of specific protocol...
2015-08-27 Matthew R.... cxlflash: Remove unused variable from queuecommand
2015-08-27 Dan Carpentercxlflash: shift wrapping bug in afu_link_reset()
2015-08-27 Dan Carpentercxlflash: off by one bug in cxlflash_show_port_status()
2015-08-27 Matthew R.... cxlflash: Virtual LUN support
2015-08-27 Matthew R.... cxlflash: Superpipe support
2015-08-27 Matthew R.... cxlflash: Base error recovery support
2015-08-27 Himanshu Madhaniqla2xxx: Update driver version to 8.07.00.26-k
2015-08-27 Sawan Chandakqla2xxx: Add pci device id 0x2261.
2015-08-27 Arun Easiqla2xxx: Fix missing device login retries.
2015-08-27 Himanshu Madhaniqla2xxx: do not clear slot in outstanding cmd array
2015-08-27 Chad Dupuisqla2xxx: Remove decrement of sp reference count in...
2015-08-27 Sawan Chandakqla2xxx: Add support to show MPI and PEP FW version...
2015-08-27 Chad Dupuisqla2xxx: Do not reset ISP for error entry with an out...
2015-08-27 Chad Dupuisqla2xxx: Do not reset adapter if SRB handle is in range.
2015-08-27 Hiral Patelqla2xxx: Do not crash system for sp ref count zero
2015-08-27 Saurav Kashyapqla2xxx: Add adapter checks for FAWWN functionality.
2015-08-27 Joe Carnuccioqla2xxx: Pause risc before manipulating risc semaphore.
2015-08-27 Joe Carnuccioqla2xxx: Use ssdid to gate semaphore manipulation.
2015-08-27 Joe Carnuccioqla2xxx: Handle AEN8014 incoming port logout.
2015-08-27 Joe Carnuccioqla2xxx: Add serdes register read/write support for...
2015-08-27 jiang.biao2... scsi_error: should not get sense for timeout IO in...
2015-08-27 Viswas Gpm80xx: Bump pm80xx driver version to 0.1.38
2015-08-27 Viswas Gpm80xx: Handling Invalid SSP Response frame
2015-08-27 Viswas Gpm80xx: Add PORT RECOVERY TIMEOUT support
2015-08-27 Viswas Gpm80xx: Remove unnecessary phy disconnect while link...
2015-08-27 Viswas Gpm80xx: Fix for Incorrect DMA Unmapping of SG List
2015-08-27 Viswas Gpm80xx: Update For Thermal Page Code
2015-08-27 Viswas Gpm80xx: Corrected device state changes in I_T_Nexus_Reset.
2015-08-27 Viswas Gpm80xx: Updated link rate
2015-08-27 Jack WangMAINTAINERS: update email for pm8001
2015-08-26 Sebastian Herbsztlpfc: Use && instead of & for boolean expression
2015-08-26 Dilip Kumar... qla2xxx: Return the fabric command state for non-task...
2015-08-26 Don Bracehpsa: fix rmmod issues
2015-08-26 shane.seymourhpsa: fix issues with multilun devices
2015-08-26 Scott Beneshhpsa: add in new offline mode
2015-08-26 Kevin BarnettChange how controllers in mixed mode are handled.
2015-08-26 Don Bracehpsa: add in new controllers
2015-08-26 Don Bracehpsa: cleanup update scsi devices
2015-08-26 Joe Handzikhpsa: add sysfs entry path_info to show box and bay...
2015-08-26 Don Bracehpsa: add PMC to copyright
2015-08-26 Don Bracehpsa: correct static checker warnings on driver init...
2015-08-26 Don Bracehpsa: correct decode sense data
2015-08-26 Don Bracehpsa: Correct double unlock of mutex
2015-08-26 Sreekanth Reddympt2sas, mpt3sas: Abort initialization if no memory...
2015-08-26 Bart Van Asscheqla2xxx: Avoid that sparse complains about context...
2015-08-26 Bart Van Asscheqla2xxx: Remove dead code
2015-08-26 Bart Van Asscheqla2xxx: Remove a superfluous test
2015-08-26 Bart Van Asscheqla2xxx: Fix sparse annotations
2015-08-26 Bart Van Asscheqla2xxx: Avoid that sparse complains about duplicate...
2015-08-26 Bart Van Asscheqla2xxx: Remove __constant_ prefix
2015-08-26 Bart Van Asscheqla2xxx: Replace two macros with an inline function
2015-08-26 Bart Van Asscheqla2xxx: Remove set-but-not-used variables
2015-08-26 Bart Van Asscheqla2xxx: Declare local functions static
2015-08-26 Bart Van Asscheqla2xxx: Report both rsp_info and rsp_info_len
2015-08-26 Johannes Thumshirnst: Destroy st_index_idr on module exit
2015-08-26 Bjorn Helgaasmegaraid_sas: fix whitespace errors
2015-08-26 Bjorn Helgaasmegaraid_sas: use dev_printk when possible
2015-08-26 Bjorn Helgaasmegaraid : use dev_printk when possible
2015-08-26 Hannes Reineckescsi: Add ALUA state change UA handling
2015-08-26 Dan Carpentermptfusion: prevent some memory corruption
2015-08-12 Vitaly Kuznetsovstorvsc: use shost_for_each_device() instead of open...
2015-08-12 Vitaly Kuznetsovstorvsc: be more picky about scmnd->sc_data_direction
2015-08-12 Seymour, Shane Mst: convert DRIVER_ATTR macros to DRIVER_ATTR_RO
2015-08-12 linuxhptiop: Support HighPoint RR36xx HBAs and Support SAS...
2015-08-12 Seymour, Shane Mst: convert to using driver attr groups for sysfs
2015-08-12 Alexey Khoroshilovbfa: fix leak of bfad_im_port_index on module unload
next