openwrt/staging/blogic.git
2019-04-29 Bart Van Asschescsi: qla2xxx: Use __le64 instead of uint32_t[2] for...
2019-04-29 Bart Van Asschescsi: qla2xxx: Introduce the dsd32 and dsd64 data struc...
2019-04-29 Bart Van Asschescsi: qla2xxx: Check the size of firmware data structur...
2019-04-29 Bart Van Asschescsi: qla2xxx: Pass little-endian values to the firmware
2019-04-29 Bart Van Asschescsi: qla2xxx: Fix race conditions in the code for...
2019-04-29 Bart Van Asschescsi: qla2xxx: Use an on-stack completion in qla24xx_co...
2019-04-29 Bart Van Asschescsi: qla2xxx: Make qla24xx_async_abort_cmd() static
2019-04-29 Bart Van Asschescsi: qla2xxx: Remove unnecessary locking from the...
2019-04-29 Bart Van Asschescsi: qla2xxx: Remove qla_tgt_cmd.released
2019-04-29 Bart Van Asschescsi: qla2xxx: Complain if a command is released that...
2019-04-29 Bart Van Asschescsi: qla2xxx: target: Fix offline port handling and...
2019-04-29 Bart Van Asschescsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_...
2019-04-29 Bart Van Asschescsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd()
2019-04-29 Bart Van Asschescsi: qla2xxx: Simplify qlt_send_term_imm_notif()
2019-04-29 Bart Van Asschescsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpa...
2019-04-29 Bart Van Asschescsi: qla2xxx: Fix a qla24xx_enable_msix() error path
2019-04-29 Bart Van Asschescsi: qla2xxx: Avoid that qla2x00_mem_free() crashes...
2019-04-29 Bart Van Asschescsi: qla2xxx: Make qla2x00_mem_free() easier to verify
2019-04-29 Bart Van Asschescsi: qla2xxx: Increase the size of the mailbox arrays...
2019-04-29 Bart Van Asschescsi: qla2xxx: Log the status code if a firmware comman...
2019-04-29 Bart Van Asschescsi: qla2xxx: Avoid that Coverity complains about...
2019-04-29 Bart Van Asschescsi: qla2xxx: Remove the fcport test from qla_nvme_abo...
2019-04-29 Bart Van Asschescsi: qla2xxx: Uninline qla2x00_init_timer()
2019-04-29 Bart Van Asschescsi: qla2xxx: Move qla2x00_is_reserved_id() from qla_i...
2019-04-29 Bart Van Asschescsi: qla2xxx: Move qla2x00_clear_loop_id() from qla_in...
2019-04-29 Bart Van Asschescsi: qla2xxx: Remove a set-but-not-used variable
2019-04-29 Bart Van Asschescsi: qla2xxx: Declare qla2x00_find_new_loop_id() static
2019-04-29 Bart Van Asschescsi: qla2xxx: Move qla2x00_set_reserved_loop_ids(...
2019-04-29 Bart Van Asschescsi: qla2xxx: Fix a format specifier
2019-04-29 Bart Van Asschescsi: qla2xxx: Update two source code comments
2019-04-29 Bart Van Asschescsi: sd: Revert "Rely on the driver core for asynchron...
2019-04-29 Bart Van Asschescsi: sd: Revert "Inline sd_probe_part2()"
2019-04-29 Pedro Sousascsi: ufs: Fix RX_TERMINATION_FORCE_ENABLE define value
2019-04-29 YueHaibingscsi: qedf: remove set but not used variables
2019-04-29 Saurav Kashyapscsi: qedf: Update the driver version to 8.37.25.20
2019-04-29 Saurav Kashyapscsi: qedf: Add return value to log message if scsi_add...
2019-04-29 Saurav Kashyapscsi: qedf: Print fcport information on wait for upload...
2019-04-29 Saurav Kashyapscsi: qedf: Check the return value of start_xmit
2019-04-29 Saurav Kashyapscsi: qedf: Log message if scsi_add_host fails
2019-04-29 Saurav Kashyapscsi: qedf: Check for fcoe_libfc_config failure
2019-04-29 Saurav Kashyapscsi: qedf: Add comment to display logging levels
2019-04-29 Chad Dupuisscsi: qedf: Add port_id for fcport into initiate_cleanu...
2019-04-29 Chad Dupuisscsi: qedf: Add LBA to underrun debug messages
2019-04-29 Chad Dupuisscsi: qedf: Print scsi_cmd backpointer in good completi...
2019-04-29 Chad Dupuisscsi: qedf: Add driver state to 'driver_stats' debugfs...
2019-04-29 Chad Dupuisscsi: qedf: Change MSI-X load error message
2019-04-29 Manish Rangankarscsi: qedi: Adjust termination and offload ramrod timers
2019-04-29 Manish Rangankarscsi: qedi: Abort ep termination if offload not scheduled
2019-04-29 Varun Prakashscsi: csiostor: create per port irq affinity mask set
2019-04-29 Himanshu Madhaniscsi: qla2xxx: Silence Successful ELS IOCB message
2019-04-29 Quinn Transcsi: qla2xxx: Fix device staying in blocked state
2019-04-29 Christoph Hellwigscsi: aic7xxx: improve the Kconfig entry
2019-04-19 Colin Ian Kingscsi: aic7xxx: fix spelling mistake "recevied" -> ...
2019-04-19 YueHaibingscsi: lpfc: Make lpfc_sli4_oas_verify static
2019-04-19 Colin Ian Kingscsi: megaraid_sas: fix spelling mistake "oustanding...
2019-04-19 Colin Ian Kingscsi: qedi: fix spelling mistake "oflload" -> "offload"
2019-04-19 Colin Ian Kingscsi: qedf: remove memset/memcpy to nfunc and use func...
2019-04-16 Li Zhongscsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TAR...
2019-04-16 YueHaibingscsi: megaraid_sas: Make megasas_host_device_list_query...
2019-04-16 Stanley Chuscsi: ufs: Print real incorrect request response code
2019-04-16 Varun Prakashscsi: cxgb4i: fix incorrect spelling "reveive" -> ...
2019-04-16 Varun Prakashscsi: libcxgbi: update route finding logic
2019-04-16 Varun Prakashscsi: libcxgbi: find cxgbi device by MAC address
2019-04-16 Ming Leiscsi: core: don't hold device refcount in IO path
2019-04-16 Himanshu Madhaniscsi: qla2xxx: Fix read offset in qla24xx_load_risc_flash()
2019-04-16 Bart Van Asschescsi: qla2xxx: Move qla2x00_set_fcport_state() from...
2019-04-16 Bart Van Asschescsi: qla2xxx: Remove two superfluous casts
2019-04-16 Bart Van Asschescsi: qla2xxx: Remove qla_tgt_cmd.data_work and qla_tgt...
2019-04-16 Bart Van Asschescsi: qla2xxx: Move the <linux/io-64-nonatomic-lo-hi...
2019-04-16 Bart Van Asschescsi: qla2xxx: Declare qla24xx_build_scsi_crc_2_iocbs...
2019-04-16 Bart Van Asschescsi: qla2xxx: Move the port_state_str[] definition...
2019-04-16 Bart Van Asschescsi: qla2xxx: Insert spaces where required
2019-04-16 Bart Van Asschescsi: qla2xxx: Fix formatting of pointer types
2019-04-16 Bart Van Asschescsi: qla2xxx: Leave a blank line after declarations
2019-04-16 Bart Van Asschescsi: qla2xxx: Use tabs to indent code
2019-04-15 John Garryscsi: libsas: Print expander PHY indexes in decimal
2019-04-15 John Garryscsi: libsas: Do discovery on empty PHY to update PHY...
2019-04-15 John Garryscsi: libsas: Inject revalidate event for root port...
2019-04-15 John Garryscsi: libsas: Improve vague log in SAS rediscovery
2019-04-15 John Garryscsi: libsas: Try to retain programmed min linkrate...
2019-04-15 John Garryscsi: libsas: Stop hardcoding SAS address length
2019-04-13 Xiang Chenscsi: hisi_sas: Some misc tidy-up
2019-04-13 Luo Jiaxingscsi: hisi_sas: Don't fail IT nexus reset for Open...
2019-04-13 Luo Jiaxingscsi: hisi_sas: Don't hard reset disk during controller...
2019-04-13 Xiaofei Tanscsi: hisi_sas: Support all RAS events with MSI interrupts
2019-04-13 Xiang Chenscsi: hisi_sas: allocate different SAS address for...
2019-04-13 Xiang Chenscsi: hisi_sas: Adjust the printk format of functions...
2019-04-13 John Garryscsi: hisi_sas: Fix for setting the PHY linkrate when...
2019-04-13 Xiang Chenscsi: hisi_sas: Remedy inconsistent PHY down state...
2019-04-13 Xiang Chenscsi: hisi_sas: add host reset interface for test
2019-04-13 Martin K. PetersenMerge branch '5.1/scsi-fixes' into 5.2/merge
2019-04-13 Bart Van Asschescsi: target/iscsi: Make sure PDU processing continues...
2019-04-13 Bart Van Asschescsi: target/iscsi: Make iscsit_map_iovec() more robust
2019-04-13 Bart Van Asschescsi: target/iscsi: Handle too large immediate data...
2019-04-13 Bart Van Asschescsi: target/iscsi: Only send R2T if needed
2019-04-13 Bart Van Asschescsi: target/iscsi: Detect conn_cmd_list corruption...
2019-04-13 Bart Van Asschescsi: target/core: Make the XCOPY setup code easier...
2019-04-13 Bart Van Asschescsi: target/core: Simplify LUN initialization in XCOPY...
2019-04-13 Bart Van Asschescsi: target/core: Remove a set-but-not-used member...
2019-04-13 Bart Van Asschescsi: target/core: Rework the SPC-2 reservation handlin...
next