project/bcm63xx/u-boot.git
2011-11-03 Bastian RuppertDavinci: ea20: set GPIOs to hold MII-Phy in reset and...
2011-11-03 Bastian RuppertDavinci: ea20: set console on UART0
2011-11-03 Heiko Schocherarm, davinci: add cam_enc_4xx support
2011-11-03 Heiko Schocherarm926ejs, davinci: add missing spi defines for dm365
2011-11-03 Heiko Schocherarm926ejs, davinci: add cpuinfo for dm365
2011-11-03 Heiko Schocherarm, davinci: add lowlevel function for dm365 soc
2011-11-03 Heiko Schocherarm, davinci: add header files for dm365
2011-11-03 Heiko Schocherspl, nand: add 4bit HW ecc oob first nand_read_page...
2011-11-03 Heiko Schocherarm, davinci: add support for new spl framework
2011-11-03 Heiko Schocherspl: add option for adding post memory test to the...
2011-11-03 Heiko Schochernet, davinci_emac: make clock divider in MDIO control...
2011-11-03 Heiko Schocherarm, usb, davinci: make USBPHY_CTL register configurable
2011-11-03 Heiko Schocherusb, davinci: add enable_vbus() weak function
2011-11-03 Sanjeev Premiomap3evm: fix errors caused by multiple definitions
2011-11-03 Sanjeev Premiomap3evm: Add (quick) configuration for NAND only
2011-11-03 Sanjeev Premiomap3evm: Add (quick) configuration for MMC/SD only
2011-11-03 Sanjeev Premiomap3evm: move common config options to new file
2011-11-03 Sanjeev Premiomap3evm: Prepare to split configuration
2011-11-03 Sanjeev Premiomap3evm: Reorder related config options
2011-11-03 Ilya Yanokomap/spl: actually enable the console
2011-11-03 Ilya Yanokdavinci_emac: compilation fix, phy is array now
2011-11-03 Sanjeev Premiomap3evm: Set environment variable 'ethaddr'
2011-11-03 Heiko Schocherarm, arm926: fix missing symbols in NAND_SPL mode
2011-11-03 Christian Riescharm, davinci: Add function lpsc_syncreset()
2011-11-03 Heiko Schocherarm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_...
2011-11-03 Thomas Herzmannarm/km: portl2 environment address update to P1B
2011-11-03 Holger Brunckarm/km: adapt bootcounter evaluation
2011-11-03 Holger Brunckarm/km: enable jffs2 cmds
2011-11-03 Holger Brunckarm/km: trigger reconfiguration for the Xilinx FPGA
2011-11-03 Holger Brunckarm/km: add boardid and hwkey to kernel command line
2011-11-03 Valentin LongchampARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile...
2011-11-03 Simon Guinotnetspace_v2: enable I2C EEPROM support
2011-11-03 Simon Guinotnetspace_v2: fix SDRAM configuration
2011-11-03 Lei Wenarmada100: define CONFIG_SYS_CACHELINE_SIZE
2011-11-03 Lei Wenpantheon: define CONFIG_SYS_CACHELINE_SIZE
2011-11-03 Michael Wallekirkwood: define CONFIG_SYS_CACHELINE_SIZE
2011-11-03 Mike Frysingerkirkwood: drop empty asm-offsets.s file
2011-11-03 Holger Brunckarm/km/mgcoge3un: enhance "waitforne" feature
2011-11-03 Holger Brunckarm/km: add variable waitforne to mgcoge3un
2011-11-03 Ajay BhargavgplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared
2011-11-03 Anatolij GustschinARM: dreamplug: fix compilation
2011-11-03 Anatolij GustschinARM: DockStar: fix compilation
2011-11-03 Anatolij GustschinARM: netspace_v2: fix warnings
2011-11-03 Tom Riniam335x: Drop board_sysinfo struct
2011-11-03 Tom Riniam335x: Temporarily add MACH_TYPE define
2011-11-03 Łukasz Majewskimisc:pmic:samsung Enable PMIC driver at C210 Universal...
2011-11-03 Łukasz Majewskidcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p...
2011-11-03 Łukasz Majewskidcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p...
2011-11-03 Chander Kashyapsmdkv310: use macro for mmc data read function address
2011-11-03 Chander Kashyapsmdkv310: use spl framework for mmc spl
2011-11-03 Chander KashyapSMDKV310: use get_ram_size() to validate dram size
2011-11-03 Chander KashyapSMDKV310: Initialize board id using CONFIG_MACH_TYPE
2011-11-03 Angus AinslieORIGEN : use absolute paths and fix tool naming
2011-11-03 Angus AinslieORIGEN : enable device tree support
2011-11-03 Stefano BabicMX25: tx25: Fix building due to missing MACH_TYPE
2011-11-03 Helmut Raigermx31: Add board support for HALE TT-01
2011-11-03 Helmut Raigermx31: add ESD control registers
2011-11-03 Helmut Raigermx31: define pins and init for UART2 and CSPI3
2011-11-03 Stefano BabicMX35: add support for flea3 board
2011-11-03 Stefano BabicMX51: vision2: add MACH_TYPE in config file
2011-11-03 Fabio Estevamvision2: Remove unused header file
2011-11-03 Fabio Estevammx51evk: Remove unused get_board_rev function
2011-11-03 Fabio Estevammx51evk: Remove unneeded '1' from mx51evk.h
2011-11-03 Marek VasutI2C: Fix mxc_i2c.c problem on imx31_phycore
2011-11-03 Fabio Estevammx35pdk: Add RTC support
2011-11-03 Fabio Estevammx51evk: Use GPIO API for configuring the IOMUX
2011-11-03 Fabio Estevammx51evk: Add RTC support
2011-11-03 Fabio Estevamrtc: Make mc13783-rtc driver generic
2011-11-03 Fabio Estevamqong: remove unneeded IOMUX settings
2011-11-03 Fabio Estevamqong: Use mx31_set_gpr to setup USBH2 pins
2011-11-03 Fabio Estevammx31: Introduce mx31_set_gpr function
2011-11-03 Fabio Estevammx31pdk: Add MC13783 PMIC support
2011-11-03 Fabio Estevamqong: remove unneeded "1" from qong.h
2011-11-03 Helmut Raigermisc: pmic: fix regression in pmic_fsl.c (SPI)
2011-11-03 Wolfgang Grandeggermx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME
2011-11-03 Stefano BabicMX35: Drop unnecessary prototypes from imx-regs.h
2011-11-03 Stefano BabicI2C: added I2C-2 and I2C-3 to MX35
2011-11-03 Stefano BabicMX35: factorize common assembly code
2011-11-03 Stefano BabicMX35: add reset cause as provided by other i.MX
2011-11-03 Stefano BabicMX35: add pins definition for UART3
2011-11-03 Stefano BabicMX35: added ESDC structure to imx-regs
2011-11-03 Mike Frysingersandbox: drop unused return
2011-11-03 Mike Frysingersandbox: put stdin into raw mode
2011-11-03 Mike Frysingerserial: sandbox: use ssize_t to match os_read
2011-11-03 Mike Frysingerserial: sandbox: optimize puts
2011-11-03 Mike Frysingersandbox/tegra2: fix typo in autocomplete define
2011-11-03 Simon Glasssandbox: Change md command to use map_physmem
2011-11-03 Simon Glasssandbox: Adjust Makefile so that standalone/api are...
2011-11-03 Anton staafsandbox: Add asm/cache.h for sandbox
2011-11-03 Wolfgang DenkReduce build times
2011-11-03 Wolfgang Denkpost/post.c: fix GCC 4.6 build warnings
2011-11-03 Wolfgang Denkpost/post.c: CodingStyle cleanup
2011-11-03 Wolfgang Denkcommon/cmd_ide.c: fix GCC 4.6 build warnings
2011-11-03 Wolfgang Denkcommon/cmd_ide.c: CodingStyle cleanup
2011-11-03 Wolfgang Denkdrivers/rtc/ds1337.c: fix GCC 4.6 build warnings
2011-11-03 Wolfgang Denk4xx_pci.c: add error checking, fix GCC 4.6 build warning
2011-11-03 Wolfgang Denkboard/prodrive/p3mx/mv_eth.c: fix GCC 4.6 build warnings
2011-11-03 Wolfgang Denk4xx_enet.c: fix GCC 4.6 build warnings
2011-11-03 Wolfgang Denk4xx_uart.c: fix GCC 4.6 build warnings
2011-11-03 Wolfgang Denkdrivers/net/eepro100.c: fix GCC 4.6 build warnings
next