openwrt/staging/ansuel.git
2011-07-07 John Crispinfix up falcon kernel config
2011-07-07 John Crispinfix i2c-falcon kmod package selection
2011-07-07 John Crispinfix ltq-vmmc SoC dependency
2011-07-07 John Crispinupdate ltq-vmmc patches
2011-07-07 John Crispinreplace all references to xway with danube
2011-07-07 John Crispinfix lantiq image makefile to represent new split betwee...
2011-07-07 John Crispinadd ar9 specific profile
2011-07-07 John Crispinrename xway profile to danube and remove ar9 specifics
2011-07-07 John Crispinremove ar9 board from xway profiles
2011-07-07 John Crispinupdate ltq-tapidemo to 5.1.0.53
2011-07-07 John Crispinremove CONFIG_MTD_PARTITIONS references from lantiq...
2011-07-07 John Crispinupdate ltq-ifxos to version 1.5.14
2011-07-07 John Crispinfixes ltq-vmmc for none falcon targets
2011-07-07 John Crispinpjsip-ltq-tap is for all lantiq targets
2011-07-07 Imre Kalozrefresh patches
2011-07-07 Imre Kalozrefresh patches
2011-07-07 Imre Kalozenable smp support
2011-07-07 Imre Kalozmake smp code more similar to upstream
2011-07-07 Imre Kaloz3.0 is at rc6 now
2011-07-07 Gabor Juhosar71xx: build image for the AP121 boards with 4M of...
2011-07-07 Gabor Juhosar71xx: add separate profiles for the AP121 and AP121...
2011-07-07 Jo-Philipp... firewall: make sure that -m mac is used with --mac...
2011-07-07 Imre Kalozadd support for and switch to XZ compressed kernels...
2011-07-07 Imre Kalozselect the right cpu
2011-07-07 Florian Fainelliadd perf
2011-07-07 Florian Fainellifix building of perf for arm on uclibc
2011-07-07 Florian Fainelliuclibc: backport FTS support
2011-07-07 Florian Fainellienable support for perf events
2011-07-07 Florian Fainellienable perf counter support
2011-07-07 Florian Fainellieglibc: add support for 2.14
2011-07-07 Florian Fainelliremove reference to old eglibc versions.
2011-07-07 Daniel Dickinsonfirewall: also correct another variable missed in previ...
2011-07-07 Daniel Dickinsonfirewall: fix wrong variable names for protocol command...
2011-07-07 Daniel Dickinsonbase-files: diag.sh: added failsafe led definition
2011-07-07 Daniel Dickinsonbase-files: preinit: Fixed sourcing of diag.sh in ...
2011-07-06 Jo-Philipp... firewall: - solve scoping issues when multiple values...
2011-07-06 John Crispinltq-tapi/vmmc were build on none lantiq targets due...
2011-07-06 John Crispinltq-tapi is not xway specific
2011-07-06 John Crispinget ready for 3.0
2011-07-06 Gabor Juhosramips: fix buffalo image generation
2011-07-06 John CrispinLantiq TAPI driver also build for other platforms
2011-07-06 Imre Kalozadd 3.0 support
2011-07-06 Imre Kalozrefresh patches
2011-07-06 Imre Kalozfixup mtd refresh and co.
2011-07-06 Imre Kalozfix myloader patch, thanks KanjiMonster
2011-07-06 John Crispinfixes mtd maps for lantiq easy50712 and easy50601 evalk...
2011-07-06 John Crispinadd support for gigaset SX76X to uboot-lantiq
2011-07-06 John Crispinfix lantiq uboot to build lzma compressed bootloaders...
2011-07-06 Imre Kalozwe have an up-to-date mach-type file now
2011-07-06 Imre Kalozreplace the cut down machtype with the full one, as...
2011-07-06 Florian Fainellimove board_HW553 inside the ifdef ..BCM6358 .. endif...
2011-07-06 Florian Fainellirefresh 2.6.39 geode patches
2011-07-06 Felix Fietkauath9k: fix some more "DMA failed to stop in 10 ms"...
2011-07-06 Felix Fietkauath9k: fix reliability issues with TKIP MIC verification
2011-07-06 Felix Fietkauath9k: always enable fast clock for 5 ghz regardless...
2011-07-06 Gabor Juhosramips: add diag support for RT-N15 and PWH2004
2011-07-06 Gabor Juhosramips: use the 'router' LED for diagnostic on the...
2011-07-06 Gabor Juhosramips: create tftp image for the WHR-G300N board
2011-07-06 Gabor Juhostools/firmware-utils: add yet another buffalo tool
2011-07-06 Gabor Juhosramips: create factory image for the WHR-G300N board
2011-07-06 Gabor Juhostools/firmware-utils: allow to create buffalo image...
2011-07-06 Gabor Juhostools/firmware-utils: allow to create buffalo tags...
2011-07-06 Daniel DickinsonMakefile: fixed inclusion of kmod-leds-gpio as a module...
2011-07-06 Daniel Dickinsonprofiles: GW6X00: fixed inclusion of both wl and wlc...
2011-07-06 Daniel Dickinsonfirewall: fix udp rules for tcpudp proto rules using...
2011-07-05 Daniel Dickinsone2fsprogs: Fixed filename of patch (needed .patch exten...
2011-07-05 Daniel Dickinsone2fsprogs: Added libpthread back to blkid link, otherwi...
2011-07-05 Imre Kalozadd some symbols
2011-07-05 Florian Fainelliiptables: add iptables-mod-led (#9400)
2011-07-05 Florian Fainellie2fsprogs: fix blkid dependencies (#9377)
2011-07-05 Florian Fainelliadd kmod-sched-netem (#8839)
2011-07-05 Florian Fainellisched_connmark depends on NF_CONNTRACK_MARK (#8976...
2011-07-05 Imre Kalozadd missing symbols
2011-07-05 Jo-Philipp... 6in4, 6to4: prevent starting the tunnel if kmod-sit...
2011-07-04 Florian Fainellihw553: fix missing has_uart0 in board definition (...
2011-07-04 Gabor Juhosar71xx: fix building of squashfs images
2011-07-04 John Crispinset DEFAULT_SUBTARGET for lantiq/
2011-07-04 John Crispinallow targets to define a default subtarget when using...
2011-07-04 John Crispinfix broken falcon patches from last night
2011-07-04 Gabor Juhosramips: create factory image for DIR-300-B1
2011-07-04 Gabor Juhostools/firmware-utils: add new firmware tool for the...
2011-07-04 Felix Fietkaukernel: use lib80211 from compat-wireless instead of...
2011-07-04 Felix Fietkauar71xx: add wzr-hp-ag300h sysupgrade support (patch...
2011-07-04 Felix Fietkauath9k: merge an upstream change to fix false tx hangs...
2011-07-04 Felix Fietkauath5k: add an upstream patch to fix a memory leak
2011-07-03 John Crispinignore empty lines in scripts/localmirrors
2011-07-03 John CrispinAT91: flexibity: add system uci file
2011-07-03 John CrispinAT91: Add flexibity board support
2011-07-03 John Crispinalix2: add/subtract features as needed
2011-07-03 John Crispinuse netif_receive_skb on lantiq
2011-07-03 John Crispinfixes dependencies of pjsip and ltq-vmmc
2011-07-03 John Crispinadd falcon support to vmmc
2011-07-03 John Crispinautomatic subtarget enumaration
2011-07-03 John Crispinupdate lantiq/falcon patches
2011-07-03 John Crispinfix description for lantiq target
2011-07-03 John Crispinextend squashfs padding for 256k flash sectors
2011-07-03 John Crispinadd menuconfig option to enable log files during build...
2011-07-03 John Crispinadd kmod for dm9000
2011-07-03 John Crispinadd kmod definitions for at24(i2c) and at25(spi) eeproms
2011-07-03 Jo-Philipp... base-files: pass conloglevel to syslogd (#9463, #9647)
next