project/bcm63xx/u-boot.git
2013-04-14 Andrew Gabbasovfsl_esdhc: Fix DMA transfer completion waiting loop
2013-04-14 Eric Nelsonfsl_esdhc: flush cache after IO completion
2013-04-13 Fabio Estevamspi: mxc_spi: Set master mode for all channels
2013-04-13 Otavio Salvadormx6qsabre{sd, auto}: Fix environment as 'mmc rescan...
2013-04-04 Dirk Behmespi: mxc_spi: Fix ECSPI reset handling
2013-04-03 Javier Martinez... i.MX6: mx6qsabrelite: README: don't pass chip-select...
2013-04-03 Fabio Estevamwandboard: Remove CONFIG_SYS_FSL_USDHC_NUM
2013-04-03 Fabio Estevammx6qsabrelite: Remove duplicate 'mmc dev'
2013-04-03 Fabio Estevamwandboard: Remove duplicate 'mmc dev'
2013-04-03 Fabio Estevammx6: Fix get_board_rev() for the mx6 solo case
2013-04-03 Alexandre Pereira... mx23_olinuxino: Fix netboot console
2013-04-03 Abbas Razammc: i.MX6: fsl_esdhc: Define maximum bus width support...
2013-04-03 Otavio Salvadormx23_olinuxino: Change definitions to use spaces instea...
2013-04-03 Benoît Thébaudeaumx25pdk: Enable imxdi RTC
2013-04-03 Fabio Estevammx6qsabrelite: README: No need to pass 'u-boot.imx'
2013-04-03 Fabio Estevammx28evk: Introduce a new target for saving env vars...
2013-04-03 Otavio Salvadormx6qsabre{sd,auto}: Add boot mode select
2013-04-03 Otavio Salvadormx6qsabresd: Fix card detection for invalid card id...
2013-04-03 Otavio Salvadormx6qsabresd: Document the mapping of USDHC[2-4]
2013-03-20 Fabio EstevamAdd initial support for Wandboard dual lite and solo.
2013-03-20 Eric Nelsoni.MX6: mx6qsabrelite: discard override of CONFIG_ARP_TI...
2013-03-20 Eric Nelsoni.MX6: Add hdmidet command to detect attached HDMI...
2013-03-20 Fabio Estevammx28evk: Disable CONFIG_CMD_I2C
2013-03-20 Knut Wohlrabimx-common: timer: fix 32-bit overflow
2013-03-20 Fabio Estevamconfigs: mx28evk: Use single-line comments
2013-03-20 Fabio Estevammxs: spl_mem_init: Align DDR2 init with FSL bootlets...
2013-03-15 Albert ARIBAUDMerge branch 'u-boot-tegra/master' into 'u-boot-arm...
2013-03-15 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2013-03-15 fabio.estevam... nitrogen: Use unsigned long to specify the total RAM...
2013-03-15 Fabio Estevamnitrogen6x: Fix RAM size variable
2013-03-14 Tom WarrenTegra114: Dalmore: Add pad config tables/code based...
2013-03-14 Tom WarrenTegra114: fdt: Move aliases from dtsi to dts file as...
2013-03-14 Tom WarrenTegra114: Dalmore: Always use DEFAULT instead of DISABL...
2013-03-14 Tom WarrenTegra114: Fix/update GP padcfg register struct
2013-03-14 Tom WarrenTegra114: pinmux: Fix bad CAM_MCLK func 3 table entry
2013-03-14 Stephen WarrenARM: tegra: enable a common set of disk-related command...
2013-03-14 Stephen Warrendisk: define HAVE_BLOCK_DEVICE if CONFIG_CMD_PART
2013-03-14 Stephen Warrendisk: define HAVE_BLOCK_DEVICE in a common place
2013-03-14 Stephen WarrenARM: tegra: make bounce buffer option common
2013-03-14 Tom WarrenTegra30: MMC: Enable DT MMC driver support for Tegra30...
2013-03-14 Tom WarrenTegra30: mmc: Add Tegra30 SDMMC compatible entry to...
2013-03-14 Tom Warrenmmc: Tegra: Add SD bus power/voltage function and MMC...
2013-03-14 Tom WarrenTegra30: MMC: Add SD bus power-rail and SDMMC pad init...
2013-03-14 Tom WarrenTegra: MMC: Added/update SDMMC registers/base addresses...
2013-03-14 Tom WarrenTegra30: fdt: Add SDMMC (sdhci) nodes for T30 boards...
2013-03-14 Tom WarrenTegra30: Cardhu: Add pad config tables/code based on...
2013-03-14 Tom WarrenTegra114: pinmux: Update pinmux tables & code, fix...
2013-03-14 Tom WarrenTegra30: Cardhu: Remove unneeded cardhu.c.mmc file
2013-03-14 Tom WarrenTegra114: fdt: Sync DT nodes with kernel DT files ...
2013-03-14 Tom WarrenTegra: Remove unused CONFIG_SYS_CPU_OSC_FREQUENCY define
2013-03-14 Tom WarrenTegra: Add twarren as maintainer for Tegra30 and Tegra1...
2013-03-14 Stephen WarrenARM: tegra: implement WAR for Tegra114 CPU reset vector
2013-03-14 Tom WarrenTegra30: fdt: Sync DT nodes with kernel DT files (I2C...
2013-03-14 Tom WarrenTegra: fdt: Remove memreserve line from Cardhu/Seaboard...
2013-03-14 Tom WarrenTegra: MMC: Add DT support to MMC driver for all T20...
2013-03-14 Tom WarrenTegra: fdt: Add/enhance sdhci (mmc) nodes for all T20...
2013-03-14 Tom WarrenTegra: fdt: tamonten: Add common tamonten.dtsi file...
2013-03-14 Tom WarrenTegra: fdt: Change /include/ to #include for C preprocessor
2013-03-14 Tom WarrenTegra114: I2C: Enable I2C driver on Dalmore E1611 eval...
2013-03-14 Tom WarrenTegra114: fdt: Update DT files with I2C info for T114...
2013-03-14 Tom WarrenTegra: I2C: Add T114 clock support to tegra_i2c driver
2013-03-14 Tom WarrenTegra114: I2C: Take DVFS out of reset to allow I2C5...
2013-03-14 Lucas Stachtegra: usb: move [start|stop]_port into ehci_hcd_[init...
2013-03-14 Lucas Stachtegra: usb: move implementation into right directory
2013-03-14 Lucas Stachtegra: usb: various small cleanups
2013-03-14 Lucas Stachtegra: usb: move controller init into start_port
2013-03-14 Lucas Stachtegra: usb: remove unneeded function parameter
2013-03-14 Lucas Stachtegra: usb: make controller init functions more self...
2013-03-14 Lucas Stachtegra: usb: set USB_PORTS_MAX to correct value
2013-03-13 Stephen WarrenARM: tegra: enable some CPU errata workarounds
2013-03-13 Stephen WarrenARM: implement some Cortex-A9 errata workarounds
2013-03-13 Eric NelsonAdd Boundary Devices Nitrogen6X boards
2013-03-12 Albert ARIBAUDRefactor linker-generated arrays
2013-03-12 Albert ARIBAUDarm: make __bss_start and __bss_end__ compiler-generated
2013-03-12 Albert ARIBAUDRemove linker lists (LGAs) from SPL linker scripts
2013-03-12 Albert ARIBAUDarm: omap: map u_boot_lists section to .sram
2013-03-12 Albert ARIBAUDMerge branch 'u-boot-atmel/master' into 'u-boot-arm...
2013-03-12 Jesse GillesARM: sam9x5: fix ethernet pins in MII mode
2013-03-12 Bo ShenARM: at91sam9x5: Using CPU string directly
2013-03-12 Bo ShenARM: at91: change nand flash table
2013-03-12 Nicolas Ferrearm: at91/configs: add bootz to configuration
2013-03-12 Nicolas Ferrearm: at91/configs: add libfdt to configuration
2013-03-11 Tom RiniMerge u-boot/master into u-boot-ti/master
2013-03-11 Lokesh Vutlaarm: dra7xx: Add silicon id support for DRA752 soc
2013-03-11 Lokesh Vutlaarm: dra7xx: Add dra7xx_evm build support
2013-03-11 Lokesh Vutlaarm: dra7xx: Add board files for DRA7XX socs
2013-03-11 Lokesh Vutlaarm: dra7xx: Add DDR related data for DRA752 ES1.0
2013-03-11 Lokesh Vutlaarm: dra7xx: Add control module changes
2013-03-11 Lokesh Vutlaarm: dra7xx: clock: Add the dplls data
2013-03-11 Lokesh Vutlaarm: dra7xx: clock: Add the prcm changes
2013-03-11 Lokesh VutlaARM: OMAP5: srcomp: enable slew rate compensation cells...
2013-03-11 Lokesh VutlaARM: OMAP5: Add DDR changes required for OMAP543X ES2...
2013-03-11 SRICHARAN RARM: OMAP4/5: clocks: Add the required OPP settings...
2013-03-11 SRICHARAN RARM: OMAP5: clock: Add the prcm register changes requir...
2013-03-11 SRICHARAN RARM: OMAP5: Add silicon id support for ES2.0 revision.
2013-03-11 Lokesh VutlaARM: OMAP5: Clean up iosettings code
2013-03-11 Lokesh VutlaARM: OMAP4+: Make control module register structure...
2013-03-11 Lokesh VutlaARM: OMAP4+: Cleanup emif specific files
2013-03-11 SRICHARAN RARM: OMAP4+: Clean up the pmic code
2013-03-11 SRICHARAN RARM: OMAP4+: Cleanup the clocks layer
next