openwrt/staging/chunkeey.git
2015-12-10 Felix Fietkaupopt: remove xgettext prereq check, it is not necessary
2015-12-10 Felix Fietkauscripts/download.pl: cleanup GNOME source location...
2015-12-10 Felix Fietkautools/mm-macros: update to 0.9.9
2015-12-10 Felix Fietkaubuild: fix arch used during dts compilation
2015-12-10 Imre Kalozmac80211: use the linux-firmware tree from 2015-12-07
2015-12-10 Imre Kalozgeneric/4.1: refresh patches
2015-12-10 Imre Kalozmvebu: fixup wifi macs for Linksys boards
2015-12-10 Imre Kalozmvebu: add support for 4.4-rc
2015-12-10 Imre Kalozmvebu: add support for 4.1 and switch over
2015-12-09 Hauke Mehrtensopenssl: add config option for no_hw support
2015-12-09 Jo-Philipp... ubus: fix various ACL processing problems
2015-12-09 Jo-Philipp... mac80211: fix passing of VHT80 in IBSS mode
2015-12-09 Jo-Philipp... mac80211: fix disabling HT in IBSS mode (#21340)
2015-12-08 Felix Fietkaukernel: revert fq_codel quantum override to prevent...
2015-12-07 Rafał Miłeckibcm53xx: update BCM5301X SMP patch to fixed version...
2015-12-07 Rafał Miłeckibcm53xx: fix selecting HAVE_SMP symbol in Kconfig
2015-12-07 Rafał Miłeckibcm53xx: use backported BCM5301X patches from stblinux...
2015-12-07 Rafał Miłeckibrcm47xx: make bcm47xxpart patch apply after recent...
2015-12-07 Imre Kalozgeneric: add missing 4.1 symbols
2015-12-07 Imre Kalozgeneric: bump 4.4 to rc4
2015-12-07 Rafał Miłeckikernel: add bcm47xxpart patches sent for 4.5 merge...
2015-12-06 Felix Fietkauar71xx: fix switch port mapping for tl-wdr4300/3600
2015-12-06 Hauke Mehrtenskernel: add missing config option.
2015-12-06 Hauke Mehrtensar7-atm: fix build with gcc 5
2015-12-06 Hauke Mehrtenskernel: add missing config options for kernel 4.4
2015-12-06 Hauke Mehrtensmac80211: fix build of mac80211-hwsim on kernel 4.4
2015-12-06 Jo-Philipp... lantiq: fix logic error in dsl board.d code
2015-12-05 Hauke Mehrtenscyassl: update to wolfSSL version 3.7.0
2015-12-05 Hauke Mehrtensupdate mtd-utils to 1.5.2
2015-12-05 Felix Fietkaukernel: fix linux 4.4 mac80211 build error
2015-12-05 Felix Fietkaulldpd: add STOP=01 param in init script
2015-12-05 Felix Fietkaulantiq: add VDSL2 vectoring status information
2015-12-05 Felix Fietkaulantiq: ltq-vdsl-mei: enable vectoring support
2015-12-05 Felix Fietkaulantiq: get rid of the dsl_fw mtd partition
2015-12-05 Felix Fietkauiw: add VHT80 support for 802.11s
2015-12-05 Felix Fietkaumac80211: Allow to select VHT80 in IBSS mode
2015-12-05 Felix Fietkauiw: add VHT80 support for IBSS
2015-12-05 Felix Fietkauiw: display interface TX power if available
2015-12-05 Felix Fietkauiw: sync nl80211.h with compat-wireless 2015-10-26
2015-12-05 Felix Fietkauiw: update to version 4.3
2015-12-05 Felix Fietkaumac80211: Allow enabling tracing for the drivers that...
2015-12-05 Felix Fietkaubusybox: Update config for 1.24.1
2015-12-05 Felix Fietkaulantiq: remove 3.18 support
2015-12-04 Felix Fietkaumac80211: enable build with linux 4.4
2015-12-04 Felix Fietkaumac80211: update to 2015-12-03
2015-12-04 Felix Fietkaulantiq: fix a race condition in the SPI driver leading...
2015-12-04 Felix Fietkaulantiq: debloat the ltq-vdsl-app binary
2015-12-04 Felix Fietkaulantiq: re-enable spi-xway for TD-W89X0 now that it...
2015-12-04 Felix Fietkaulantiq: fix xway spi driver timeout issues
2015-12-04 Felix Fietkaulantiq: clean up the xrx200 ethernet driver and fix...
2015-12-04 Felix Fietkaubr2684ctl: convert init script to procd, add hotplug...
2015-12-04 Felix Fietkaulantiq: move esi calls to dsl_cpe_control scripts to...
2015-12-04 Jo-Philipp... ar71xx: convert gpio switch config to board.d
2015-12-04 Jo-Philipp... board.d: add support for gpio_switch sections
2015-12-04 Jo-Philipp... mcs814x: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... sunxi: fix board.d permissions
2015-12-04 Jo-Philipp... orion: convert initial network configuration to board.d
2015-12-04 Jo-Philipp... sunxi: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... ar7: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... ath25: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... lantiq: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... brcm63xx: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... all: remove redundant board.d/00_model files
2015-12-04 Jo-Philipp... base-files: board.d: auto-set model id and name if...
2015-12-04 Jonas Gorskikernel: drop bridge hack for removing ipv6 dependency
2015-12-04 Jo-Philipp... base-files: board.d: support dsl modems, atm bridges...
2015-12-04 Jonas Gorskikernel: mvswitch: merge 3.10+ compile fix into the...
2015-12-04 Rafał Miłeckikernel: drop unneeded modification of mtd_add_partition...
2015-12-04 Rafał Miłeckikernel: drop old uimage splitter from 4.4
2015-12-04 Jo-Philipp... malta: board.d: fix typo
2015-12-03 Jo-Philipp... kirkwood: add missing board_config_flush(), remove...
2015-12-03 Jo-Philipp... all: remove dummy ucidef_set_interface_loopback() from...
2015-12-03 Jo-Philipp... arc770: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... mxs: convert from uci-defaults to board.d
2015-12-03 Jo-Philipp... malta: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... at91: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... realview: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... imx6: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... netlogic: fix typo, copyright in board.d script
2015-12-03 Jo-Philipp... netlogic: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... kirkwood, ipq806x: fix board.d script permissions
2015-12-03 Jo-Philipp... octeon: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... kirkwood: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... base-files: board.d: support specifiying the protocol...
2015-12-03 Jo-Philipp... base-files: board.d: support timer leds
2015-12-03 Jo-Philipp... ipq806x: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... base-files: board.d: support ide leds
2015-12-03 Jo-Philipp... base-files: uci-defaults-new.sh: fix for handling multi...
2015-12-03 Hauke Mehrtensopenssl: update to version 1.0.2e
2015-12-03 Hauke Mehrtensmbedtls: update to version 2.1.3
2015-12-03 Hauke Mehrtenspolarssl: update to version 1.3.15
2015-12-03 Jo-Philipp... ar71xx: board.d: add missing include (#21296)
2015-12-03 Jo-Philipp... board.d: remove redundant ucidef_set_interfaces_lan_wan...
2015-12-03 Jo-Philipp... board.d: merge ucidef_add_switch() and ucidef_add_switc...
2015-12-03 Jo-Philipp... base-files: uci-defaults-new: remove reset/enable args...
2015-12-03 Jo-Philipp... base-files: uci-defaults-new, config_generate: refactor...
2015-12-03 Jo-Philipp... base-files: config_generate: add missing chunks of...
2015-12-03 Jo-Philipp... ramips: switch ucidef_add_switch_vlan() to ucidef_add_s...
2015-12-03 Felix Fietkaukernel: backport support for m25p80 compatible="jedec...
2015-12-03 Felix FietkauuClibc-ng: update to 1.0.9
next