project/bcm63xx/u-boot.git
2019-02-16 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2019-02-16 Marek Vasutmmc: tmio: sdhi: Configure DT2FF register for HS400...
2019-02-16 Marek Vasutmmc: tmio: Configure HOST_MODE WMODE according to bus...
2019-02-16 Marek Vasutmmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before...
2019-02-16 Tom RiniMerge tag 'u-boot-imx-2019-02-16' of git://git.denx...
2019-02-16 Tom RiniMerge tag 'xilinx-for-v2019.04-rc2' of git://git.denx...
2019-02-16 Tom RiniMerge tag '2019.01-next' of https://github.com/mbgg...
2019-02-15 Max Krummenacherimx: cpu.c: give access to reset cause in spl
2019-02-15 Max Krummenacherimx: serial_mxc: disable ri and dcd irq in dte mode
2019-02-15 Marcel ZiswilerARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells...
2019-02-15 Tim Harveyimx: ventana: fix usage of dt paths with leading 0s...
2019-02-15 Tim Harveyimx: ventana: gw5904/gw5909: disable RS485
2019-02-15 Tim Harveyimx: ventana: add support for GW5901/GW5902
2019-02-15 Tim Harveyimx: ventana: add support for GW5909
2019-02-15 Tim Harveyimx: ventana: add support for GW5908
2019-02-15 Tim Harveyimx: ventana: add support for GW5907
2019-02-15 Tim Harveyimx: ventana: add support for GW5906
2019-02-15 Tim Harveyimx: ventana: add i2c detect for all LVDS displays
2019-02-15 Tim Harveyimx: ventana: skip nand init for nandless boards
2019-02-15 Tim Harveyimx: ventana: add support for Z101WX01 LVDS display
2019-02-15 Tim Harveyimx: ventana: add support for GW5905
2019-02-15 Tim Harveyimx: ventana: remove setup of I2C3 from SPL
2019-02-15 Tim Harveyimx: ventana: do not iomux UART1
2019-02-15 Tim Harveyimx: ventana: mv88e61xx change LED configuration
2019-02-15 Abel Vesaconfigs: mx6sabresd: Reduce SPL size by disabling DOS...
2019-02-15 Abel Vesaboard: mx6sabresd: Remove the enet reset gpio handling
2019-02-15 Abel Vesaboard: mx6sabresd: Remove non-DM code
2019-02-15 Abel Vesaconfigs: mx6sabresd: Add DM_SPI_FLASH necessary configs
2019-02-15 Abel Vesaboard: mx6sabreauto: Remove the non-DM code
2019-02-15 Abel Vesaconfigs: mx6sabreauto: Add DM_SPI_FLASH necessary configs
2019-02-15 Abel Vesamx6sabreauto: Add DM_GPIO support
2019-02-15 Abel Vesamx6sabresd: Add DM_GPIO support
2019-02-15 Abel Vesaconfigs: mx6sabresd: Add SPL FIT and DM support
2019-02-15 Abel Vesaconfigs: mx6sabreauto: Add SPL FIT and DM support
2019-02-15 Abel Vesaarm: dts: Update all the dts[i] files for imx6[q|qp...
2019-02-15 Abel Vesaarm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd]...
2019-02-15 Abel Vesaboard: mx6sabreauto: Add board_fit_config_name_match...
2019-02-15 Abel Vesaboard: mx6sabresd: Add board_fit_config_name_match...
2019-02-15 Abel Vesammc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds
2019-02-15 Abel Vesaconfigs: imx6sabreauto: Add DM_USB support
2019-02-15 Abel Vesaconfigs: imx6sabreauto: Add DM_MMC support
2019-02-15 Abel Vesausb: ehci-mx6: Make regulator DM_REGULATOR dependent
2019-02-15 Abel Vesausb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE
2019-02-15 Michal Simekarm64: zynqmp: Create fdtfile from compatible string
2019-02-15 Venkatesh Yadav... arm64: zynqmp: Change the spi-rx-bus-width property...
2019-02-15 Shubhrajyoti... arm64: zynqmp: Fix i2c boot warning
2019-02-15 Michal Simekarm64: zynqmp: Remove autodetected devices without...
2019-02-15 Amit Kucheriaarm64: dts: Fix various entry-method properties to...
2019-02-15 Michal Simekxilinx: dts: Remove additional empty lines
2019-02-15 Mounika Grace... arm64: zynqmp: Add reset-on-timeout for all boards...
2019-02-15 Luis AranedaARM: dts: zynq: correct and improve the model property...
2019-02-15 Luis AranedaARM: dts: zynq: Set correct manufacturer for ZedBoard...
2019-02-15 Michal SimekARM: dts: Use mmc@ instead sdhci@
2019-02-15 Tim Harveynet: mv88e61xx: fix autonegotiation on ports
2019-02-15 Breno Matheus... doc: imx: habv4: Remove secure_boot.txt guide
2019-02-15 Jonathan Grayrpi: add Compute Module 3+
2019-02-15 Adam Heinrichcmd: bmp: Make integer-to-pointer cast platform, indepe...
2019-02-15 Breno Matheus... doc: imx: habv4: Move encrypted boot guide
2019-02-15 Breno Matheus... doc: imx: habv4: Add Secure Boot guide for i.MX6 and...
2019-02-15 Breno Matheus... doc: imx: habv4: Add Secure Boot guide for i.MX6 and...
2019-02-15 Breno Matheus... doc: imx: habv4: Add HABv4 introduction
2019-02-15 Breno Matheus... doc: imx: habv4: Remove extra hab directory for a clean...
2019-02-15 Marcin NiestrojARM: dts: imx6ul-lite*: add DTS files for liteSOM and...
2019-02-15 Adam FordMTD: nand: mxs_nand: Allow driver to auto setup ECC...
2019-02-15 Adam Fordnet: dm: fec: Fix regulator enable when using DM_REGULATOR
2019-02-15 Adam FordARM: imx6q_logic: Correct phy fixup for broken ethernet
2019-02-15 Adam FordARM: imx6q_logic: Enable SPL Booting from NAND
2019-02-15 Adam FordMTD: NAND: mxs_nand_init_dma: Make mxs_nand_init_dma...
2019-02-15 Adam FordMTD: mxs_nand: Fix BCH read timeout error on boards...
2019-02-15 Lukasz Majewskiddr: vybrid: Add calibration code to memory controler...
2019-02-15 Lukasz Majewskiddr: vybrid: Provide code to perform on-boot calibration
2019-02-15 Lukasz Majewskiddr: vybrid: Add DDRMC calibration related registers...
2019-02-15 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sunxi
2019-02-14 Michal Simekarm64: zynqmp: Remove board config files
2019-02-14 Michal Simekarm64: zynqmp: Remove SPD related configurations
2019-02-14 Michal Simekarm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI
2019-02-14 Michal Simekxilinx: common: Remove !DM_i2C code for reading mac...
2019-02-14 Michal Simeki2c: Remove ancient zynq_i2c driver
2019-02-14 Michal Simekarm64: zynqmp: Remove addresses for i2c controllers
2019-02-14 Michal Simekarm64: zynqmp: Switch all platforms to DM_I2C
2019-02-14 Michal SimekARM: zynq: Remove addresses for i2c controllers
2019-02-14 Michal SimekARM: zynq: Convert dlc20 and zc70x board to DM_I2C
2019-02-14 Michal SimekARM: zynq: Convert Syzygy to DM_I2C
2019-02-14 Siva Durga... arm64: versal: Add mini configuration for Versal
2019-02-14 Michal Simekarm64: versal: Move IOU_SWITCH_DIVISOR0 to Kconfig
2019-02-14 Michal Simekarm64: versal: Remove one level of indentation in board...
2019-02-14 Siva Durga... arm64: versal: Define distro boot commnads for qspi...
2019-02-14 Michal Simekarm64: versal: Disable showing information about console
2019-02-14 Siva Durga... arm: zynq: Update boot_targets based on bootmode
2019-02-14 Siva Durga... arm: zynq: Define distro boot commnads for qspi, nand...
2019-02-14 Michal Simekspi: zynqmp_gqspi: Enable versal compatible string
2019-02-14 Siva Durga... arm64: versal: Add mini eMMC configuration
2019-02-14 Michal Simekarm64: versal: Enable different ethernet phy for virt...
2019-02-14 Siva Durga... arm64: versal: Add new Kconfig SYS_MEM_RSVD_FOR_MMU
2019-02-14 Michal SimekARM: zynq: Convert Antminer to OF_SEPARATE
2019-02-14 Michal Simekxilinx: common: Add support for DM_I2C zynq_board_read_...
2019-02-14 Michal Simekxilinx: Move zynq_board_read_rom_ethaddr to shared...
2019-02-14 Siva Durga... arm64: zynqmp: Define distro boot commnads for qspi...
2019-02-14 Michal SimekARM: zynq: Run distribution boot commands first
2019-02-13 Tom RiniMerge tag 'signed-efi-next' of git://github.com/agraf...
next