project/bcm63xx/u-boot.git
2012-09-01 tremrtc: add support of mx27 rtc
2012-09-01 Marek VasutMX28: Shuffle around the power management code
2012-09-01 Marek VasutMX28: Drop the cp15 reconfiguration from SPL
2012-09-01 Vikram Narayanantx25: Use generic gpio_* calls
2012-09-01 Otavio Salvadormxs: Convert sys_proto.h prefixes to 'mxs'
2012-09-01 Otavio Salvadormxs: rename regs-clkctrl.h to regs-clkctrl-mx28.h
2012-09-01 Otavio Salvadormxs: Remove not required include of iomux-mx28.h
2012-09-01 Otavio Salvadormxs: Remove not required explicit iomux-mx28.h include
2012-09-01 Fabio Estevamapx4devkit: Turn on caches
2012-09-01 Fabio Estevamm28evk: Turn on caches
2012-09-01 Łukasz Majewskiarm:cache:trats: Enable PL310 L2 Cache Controller at...
2012-09-01 Łukasz Majewskiarm:exynos: Enable data cache at exynos based processors.
2012-09-01 Donghwa Leevideo: support exynos pwm backlight driver
2012-09-01 Donghwa Leevideo: exynos fb driver supports display port feature
2012-09-01 Donghwa Leevideo: add dp_enabled variable in vidinfo structure
2012-09-01 Donghwa Leevideo: support exynos display port drivers
2012-09-01 Donghwa LeeEXYNOS5: add display port base address
2012-09-01 Donghwa LeeEXYNOS5: support display port phy control function
2012-09-01 Donghwa LeeEXYNOS5: support display system register control
2012-09-01 Donghwa LeeEXYNOS5: support exynos5 lcd clock control
2012-09-01 Donghwa Leevideo: support exynos fimd driver for various exynos...
2012-09-01 Jaehoon ChungARM: EXYNOS: fixed compiler warning message
2012-09-01 Zhong Hongboarm/s5pxx: Fix get_timer_masked to get the time.
2012-09-01 Łukasz Majewskiarm:trats: loaduimage environment variable defied for...
2012-09-01 Rajeshwari... SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
2012-09-01 Rajeshwari... EXYNOS5 : Modify pinnumx settings as per Exynos5250...
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: Add BPLL support
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250...
2012-09-01 Rajeshwari... Exynos5: DDR3: Add DDR3 memory setup for Exynos5250...
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
2012-09-01 Rajeshwari... EXYNOS5: CLOCK: define additional clock registers for...
2012-09-01 Rajeshwari... SMDK5250: Add smdk5250-uboot-spl.lds
2012-09-01 Rajeshwari... SMDK5250: SPL: Define parametric board initializer
2012-09-01 Rajeshwari... ARCH: SPL: Add parametric board initializer
2012-09-01 Rob HerringARM: Remove unused stack and irq config defines
2012-09-01 Tetsuyuki Kobayashiarm: bugfix: save_boot_params_default accesses uninital...
2012-09-01 Allen Martintegra20: Remove armv4t build flags
2012-09-01 Allen Martinspl: fix SPL build of private libgcc
2012-09-01 Allen Martinarm: enable libgcc build for SPL
2012-09-01 Allen Martintegra20: enable SPL for tegra20 boards
2012-09-01 Allen Martintegra20: move SDRAM param save to later in boot
2012-09-01 Allen Martintegra20: add u-boot-*-tegra.bin targets
2012-09-01 Allen MartinARM: add tegra20 support to arm720t
2012-09-01 Allen Martintegra20: remove timer_init from SPL build
2012-09-01 Allen MartinARM: Fix arm720t SPL build
2012-09-01 Allen MartinMAKEALL: update to work with new boards.cfg syntax
2012-09-01 Allen Martinmkconfig: remove bashisms and cleanup config.mk generation
2012-09-01 Allen Martintegra20: make board mkdir commands unconditional
2012-09-01 Allen Martintegra20: tec: add tegra20-common-post.h
2012-09-01 Allen Martintegra20: rename CONFIG_MACH_TEGRA_GENERIC
2012-09-01 Allen Martintegra20: move tegra20 SoC code to arch/arm/cpu/tegra20...
2012-09-01 Allen Martintegra20: rename tegra2 -> tegra20
2012-09-01 Stephen WarrenARM: add Raspberry Pi model B board, using BCM2835 SoC
2012-09-01 Stephen WarrenARM: add basic support for the Broadcom BCM2835 SoC
2012-09-01 Stephen WarrenARM: arm1176: enable instruction cache in arch_cpu_init()
2012-09-01 Stephen WarrenREADME: fix references to config_cmd_default.h
2012-09-01 Mathieu J.... snowball: Adding board specific cache cleanup routine
2012-09-01 Mathieu J.... armv7: Adding cpu specific cache managmenent
2012-09-01 John Rigbyu8500: Separating mmc config parameters from driver
2012-09-01 Mathieu J.... u8500: Enabling power to MMC device on AB8500 V2
2012-09-01 Mathieu J.... u8500: Moving processor-specific functions to cpu area.
2012-09-01 Mathieu J.... snowball: applying power to LAN and GBF controllers
2012-09-01 Mathieu J.... snowball: Moving to ux500.v2 addess scheme for PRCMU...
2012-09-01 Mathieu J.... snowball: Adding CPU clock initialisation
2012-09-01 Mathieu J.... snowball: Adding architecture dependent initialisation
2012-09-01 Mathieu J.... u8500: Moving prcmu to cpu directory
2012-09-01 Mathieu J.... snowball: Add support for ux500 based snowball board
2012-09-01 Tom Rinidavinci, c6x: Always use C version of reset code
2012-09-01 Jeroen Hofsteearm: omap: Fix switching back to nandecc sw.
2012-09-01 Heiko Schocherdavinci: enbw_cmc: change switch init behaviour
2012-09-01 Satyanarayana... am33xx evm: Update secure_emif_sdram_config during...
2012-09-01 Sughosh Ganuda8xx/hawkboard: Add support for ohci host controller
2012-09-01 Tom Riniarmv7: Make lowlevel_init.S's lowlevel_init do ABI...
2012-09-01 Tom Riniomap4/5/am33xx: Make lowlevel_init available to all...
2012-09-01 Tom Riniam335x evm: Enable support for spi0
2012-09-01 Tom Riniam33xx: Add support, update omap3 McSPI driver
2012-09-01 Tom Riniam335x evm: Enable MMC1 pinmux
2012-09-01 Tom Riniam33xx: Correct MMC1, remove MMC2 support
2012-09-01 Tom Riniam335x evm: Initial support for AM335x GP EVM Profiles
2012-09-01 Otavio Salvadorsc_sps_1: Adjust board config to use 'mxs' SoC code
2012-09-01 Benoît Thébaudeaurtc: imxdi: Initial support
2012-09-01 Marek VasutMX28: Add SchulerControl SC_SPS_1 platform
2012-09-01 Stathis Voukelatosi.MX28: bug fixes in PMU configuration code
2012-09-01 Marek VasutMX28: Move the u-boot.bd info CPUDIR/SOCDIR
2012-09-01 Fabio Estevamvision2: do not overwrite the console
2012-09-01 Fabio Estevammx51evk: do not overwrite the console
2012-09-01 Stefano BabicMX5: mx53loco: do not overwrite the console
2012-09-01 Marek VasutMX28: Fix MXS MMC DMA issues
2012-09-01 Marek VasutMX28: Transfer small blocks via PIO in MXS MMC
2012-09-01 Marek VasutMX28: Split out the PIO and DMA transfer functions
2012-09-01 Marek VasutMX28: Fix up the MMC driver DMA mode
2012-09-01 Otavio Salvadormxs: rename mx28.c to mxs.c as it is common to i.MX233...
2012-09-01 Otavio Salvadormxs: Clarify why we poweroff in case of brownout in...
2012-09-01 Otavio Salvadormxs: Reowork SPL to use 'mxs' prefix for methods
2012-09-01 Otavio Salvadormxs: prefix register structs with 'mxs' prefix
2012-09-01 Otavio Salvadormxs: prefix register acessor macros with 'mxs' prefix
2012-09-01 Otavio Salvadormxs: reorganize source directory for easy sharing of...
2012-09-01 Fabio Estevammx28evk: Turn on caches
2012-09-01 Otavio SalvadorMX28: use a clear name for DDR2 initialization
2012-09-01 Veli-Pekka... Add support for Bluegiga APX4 Development Kit
next