project/bcm63xx/u-boot.git
2011-04-29 Heiko Schocherkeymile, common; fix i2c deblocking support
2011-04-29 Heiko Schocherppc, 8321: cleanup tuxa1, tuda1 and suvd3 support
2011-04-29 Heiko Schocherkm_arm: change some register values for SDRAM initializ...
2011-04-29 Heiko Schocherkm-arm: i2c support for suenx based boards
2011-04-29 Heiko Schocherpowerpc, 83xx: add kmsupx5 board support
2011-04-29 Thomas Reuferkeymile, 8321 boards: move common definitions to km8321...
2011-04-29 Heiko Schocherppc: add support for ppc based board mgcoge2ne
2011-04-29 Heiko Schocherarm: add support of Kirkwood based board SUEN8
2011-04-29 Heiko Schocherarm: add support for kirkwood based mgcoge2un board
2011-04-29 Heiko Schochermpc832x: add support for mpc8321 based tuda1 board
2011-04-29 Heiko Schochermpc832x: add support for mpc8321 based tuxa1 board
2011-04-29 Heiko Schochermpc832x: add support for the mpc8321 based suvd3 board
2011-04-29 Holger Brunckarm, ppc: rework environment variables for keymile...
2011-04-29 Holger Brunckppc, arm: adapt keymile header
2011-04-29 Heiko Schocherkeymile: Fix Coding style issues for keymile boards.
2011-04-29 Holger Brunckarm, keymile: rename MACH_SUEN3 to MACH_KM_KIRKWOOD
2011-04-29 Heiko Schocherpowerpc, mpc83xx: add missing functions to include...
2011-04-29 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-mmc
2011-04-29 Thomas Choummc: coding style fix and tabify of mmc.h
2011-04-29 Jason Liufsl_esdhc: Fix multi-block read restriction on i.MX53...
2011-04-29 John RigbyMMC: omap_hsmmc.c: disable multiblock rw on old rev...
2011-04-29 John RigbyMMC: make b_max unconditional
2011-04-29 Thomas Choummc_spi: add mmc_init call
2011-04-29 Matt WaddelARMV7: Vexpress: Add MMC support
2011-04-29 Matt WaddelMMC: Add support for PL180 ARM mmc device
2011-04-28 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-video
2011-04-28 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-i2c
2011-04-28 Timur Tabipowerpc: use 'video-mode' environment variable to confi...
2011-04-28 Timur Tabivideo: parse the video-mode environment variable
2011-04-28 Anatolij Gustschincfb_console: fix RLE bitmap drawing code
2011-04-28 Grant LikelyAdd CONFIG_OF_LIBFDT to more boards.
2011-04-28 Heiko Schocheri2c, soft_i2c: deblock bus if switching to another...
2011-04-28 Stefan Bigleri2c: add i2c deblock sequence before and after every...
2011-04-28 Po-Yu Chuangarm: a320: fix compile error caused by commit 00d10eb
2011-04-27 Kim Phillipscommon: add a grepenv command
2011-04-27 Timur Tabipowerpc: fix implementation of out_8 to match the other...
2011-04-27 Kim Phillipsenv: fix env var autocompletion
2011-04-27 Heiko Schochermpc52xx, digsy_mtc: protect default flash sectors
2011-04-27 Heiko Schochermpc52xx, digsy_mtc: change phy addr for rev5 boards.
2011-04-27 Gray RemlinNET: Correct potential missing goto label in case state...
2011-04-27 thomas.langer... fix redundant environment for serial flash
2011-04-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-arm
2011-04-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-fdt
2011-04-27 Wolfgang DenkMerge branch 'master' of git://git.denx.de/u-boot-blackfin
2011-04-27 Wolfgang DenkMerge branch 'spi' of git://git.denx.de/u-boot-blackfin
2011-04-27 Minkyu KangDon't grab memory for LCD if FB address is defined
2011-04-27 Alessandro... nhk8815: move config targets from Makefile to boards.cfg
2011-04-27 Alessandro... nhk8815: add support for relocation
2011-04-27 Alessandro... nhk8815: remove platform.S, which was unused at link...
2011-04-27 Eric Benardcpuat91: fix board support
2011-04-27 Macpaul Linftsmc020: move ftsmc020 static mem controller to driver/mtd
2011-04-27 Macpaul Linftsdmc020: move ftsdmc020.h to include/faraday
2011-04-27 Eric Benardcpu9260: update board support
2011-04-27 Sughosh GanuFix the issue of _end symbol not being found while...
2011-04-27 Luca CeresoliARMV7: OMAP3: Add support for Comelit DIG297 board
2011-04-27 Luca CeresoliARMV7: OMAP3: Cleanup extern variables in mem.c
2011-04-27 Tom Warrenarm: Tegra2: Move clk/mux init to board_early_init_f...
2011-04-27 Tom Warrenarm: Tegra2: GPIO: Add basic GPIO definitions
2011-04-27 Tom Warrenarm: Tegra2: Add missing PLLX init
2011-04-27 Eric CooperARM: fix stack pointer adjustment in board_init_f()
2011-04-27 Tom Warrenarm: Tegra2: add support for A9 CPU init
2011-04-27 Luca CeresoliARMV7: OMAP3: Add GPMC_CONFIGx register value definitions
2011-04-27 Luca CeresoliARMV7: OMAP3: Fix preprocessor check for CONFIG_OMAP34XX
2011-04-27 Alexander Holleromap3_beagle: enable EHCI and USB storage.
2011-04-27 Alexander HollerOMAP3: Add support for DPLL5 (usbhost)
2011-04-27 Alexander HollerOMAP3: Change some USB related MUX values
2011-04-27 Enric Balletbo... ARM: OMAP3: Revamp IGEP module default configuration
2011-04-27 Enric Balletbo... ARM: OMAP3: Revamp IGEP v2 default
2011-04-27 Albert ARIBAUDReplace obsolete e-mail address
2011-04-27 Macpaul Lina320evb: fix include path of timer fttmr010
2011-04-27 Macpaul Linfttmr010: move fttmr010 header to include/faraday
2011-04-27 Macpaul Linftpmu010.h: add asm support used by lowlevel_init
2011-04-27 Macpaul Linftpmu010: fix relocation and enhance features
2011-04-27 Rogan DawesOrion5x: Correct DRAM bank detection
2011-04-27 Lei WenI2C: add i2c support for Armada100 platform
2011-04-27 Lei WenI2C: mv_i2c: add multi bus support
2011-04-27 Lei WenI2C: add i2c support for Pantheon platform
2011-04-27 Lei Wenmv_i2c: use structure to replace the direclty define
2011-04-27 Lei Wenmv_i2c: fix timeout value to be consistent with comments
2011-04-27 Lei Wenpxa: move i2c driver to the common place
2011-04-27 Fabio EstevamMX25: tx25: Add _end section on nand_spl
2011-04-27 Stefano BabicMX31: mx31pdk: fix nand_spl
2011-04-27 Matt WaddelARMV7: Vexpress: Remove config.mk
2011-04-27 Po-Yu Chuangarm: a320: use new ftpmu010 API
2011-04-27 Po-Yu Chuangpower: ftpmu010: move drivers/power/ftpmu010.h to inclu...
2011-04-27 Matthias Weisserarm: Use optimized memcpy and memset from linux
2011-04-27 Igor GrinbergOMAP3: CM-T35: Add support for CM-T3730
2011-04-27 Igor GrinbergOMAP3: CM-T35: enable the green LED
2011-04-27 Igor GrinbergOMAP3: CM-T35: remove redundand i2c initialization
2011-04-27 Igor GrinbergOMAP3: CM-T35: fix mmc
2011-04-27 Igor GrinbergOMAP3: CM-T35: add MMC1 pinmux
2011-04-27 Igor GrinbergOMAP3: CM-T35: update MAINTAINERS file
2011-04-27 Igor GrinbergOMAP3: CM-T35: update board files header information
2011-04-27 Igor GrinbergOMAP3: CM-T35: update config
2011-04-27 Igor GrinbergOMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file...
2011-04-27 SrinathARMV7: AM3517/05: Add support for CraneBoard.
2011-04-27 Koen KooiOMAP3: BeagleBoard: add more expansionboard IDs
2011-04-27 Koen KooiOMAP3: BeagleBoard: add xM rev B to ID table
2011-04-27 Steve KipiszOMAP3: BeagleBoard: Enable pullups on i2c2.
2011-04-27 Alexander Holleromap3_beagle: enable the use of a plain text file
next