project/bcm63xx/u-boot.git
2015-01-22 Tom RiniMerge branch 'phys_t' of git://denx.de/git/u-boot-micro...
2015-01-22 Tom RiniMerge branch 'fpga' of git://denx.de/git/u-boot-microblaze
2015-01-21 Hans de Goedesunxi: Restore lowlevel_init usage
2015-01-21 Michal Simekmmc: zynq: Use phys_addr_t for addresses
2015-01-21 Michal Simeknet: ll_temac: Fix compilation warning because of phys_...
2015-01-21 Michal Simeknet: gem: Use phys_addr_t instead of int for addresses
2015-01-21 Siva Durga... fpga: zynqpl: Add support for zc7035
2015-01-21 Michal Simekfpga: xilinx: Show fpga info if defined
2015-01-21 Michal Simekfpga: xilinx: Check if fpga operations are defined
2015-01-21 Michal Simekfpga: xilinx: zynqpl: Setup NULL fpga_op without driver
2015-01-21 Michal Simekfpga: xilinx: virtex2: Fix macro indentation
2015-01-21 Michal Simekfpga: xilinx: virtex2: Setup NULL fpga_op without driver
2015-01-21 Michal Simekfpga: xilinx: spartan3: Setup NULL fpga_op without...
2015-01-21 Michal Simekfpga: xilinx: spartan2: Setup NULL fpga_op without...
2015-01-21 Michal Simekfpga: Export fpga_get_desc for SPL
2015-01-21 Michal Simekfpga: Remove extern prototypes from .h
2015-01-21 Michal Simekfpga: Protect GZIP usage when LOADMK is enabled
2015-01-20 Tom RiniMerge git://git.denx.de/u-boot-arc
2015-01-20 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mmc
2015-01-20 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-usb
2015-01-20 Sinan AkmanMAINTAINERS: add me as the maintainer of mpc837xerdb
2015-01-20 Sinan AkmanUse generic board architecture for MPC837xERDB
2015-01-20 Simon Glassimx: ls102xa: Remove reference to gdata
2015-01-20 Simon Glassimx: woodburn: Remove reference to gdata
2015-01-20 Simon Glassimx: cm_fx6: Remove reference to gdata
2015-01-20 Simon Glasszynq: Remove reference to gdata
2015-01-19 Andrew Gabbasovmmc: Skip changing bus width for MMC cards earlier...
2015-01-19 Andrew Gabbasovmmc: Avoid redundant switching to 1-bit bus width for...
2015-01-19 Diego Santa... mmc: extend mmcinfo output to show partition write...
2015-01-19 Diego Santa... mmc: extend the mmc hwpartition sub-command to change...
2015-01-19 Diego Santa... mmc: extend the mmc hardware partitioning API with...
2015-01-19 Diego Santa... mmc: add mmc hwpartition sub-command to do eMMC hardwar...
2015-01-19 Diego Santa... mmc: add API to do eMMC hardware partitioning
2015-01-19 Diego Santa... mmc: the ext_csd data may be used during init even...
2015-01-19 Diego Santa... mmc: eMMC partitioning data is not effective till parti...
2015-01-19 Diego Santa... mmc: show the erase group size and HC WP group size...
2015-01-19 Diego Santa... mmc: read the high capacity WP group size for eMMC
2015-01-19 Diego Santa... mmc: fix erase_grp_size computation with high-capacity...
2015-01-19 Diego Santa... mmc: display size and start of eMMC enhanced user data...
2015-01-19 Diego Santa... mmc: read the size of eMMC enhanced user data area
2015-01-19 Diego Santa... mmc: computation of eMMC GP partition size was missing...
2015-01-19 Diego Santa... mmc: incomplete test to switch to high-capacity group...
2015-01-19 Diego Santa... mmc: skip mmcinfo partition info processing for eMMC...
2015-01-19 Diego Santa... mmc: make eMMC general purpose partition numbering...
2015-01-19 Diego Santa... mmc: extend mmcinfo to show enhanced partition attribute
2015-01-19 Diego Santa... mmc: show hardware partition sizes in mmcinfo output
2015-01-19 Nobuhiro Iwamatsummc: rmobile: Add SDHC support for Renesas rmobile...
2015-01-18 Rene Griesslusb: eth: asix88179: add ability to modify MAC address
2015-01-18 Hans de Goedemusb-new: Add interrupt queue support
2015-01-18 Hans de Goedemusb-new: Add urb and hep parameters to construct_urb
2015-01-18 Hans de Goedemusb-new: Properly remove a transfer from the schedule...
2015-01-18 Hans de Goedemusb-new: Fix reset sequence when in host mode
2015-01-18 Hans de Goedemusb-new: Fix interrupt transfers not working
2015-01-18 Hans de Goedemusb-new: Use time based timeouts rather then cpu-cycle...
2015-01-18 Hans de Goedemusb-new: Add sunxi musb controller support
2015-01-18 Hans de Goedemusb-new: Add register defines for different reg layout...
2015-01-18 Hans de Goedeusb: Do not log an error when no devices is plugged...
2015-01-18 Hans de Goedeusb: Fix usb_kbd_deregister when console-muxing is...
2015-01-18 Hans de Goedeusb: Add an interval parameter to create_int_queue
2015-01-18 Hans de Goedeconfig_distro_bootcmd.h: Remove unnecessary magic to...
2015-01-18 Hans de GoedeUSB: make "usb start" start usb only once
2015-01-18 Alex Sadovskyusb: gadget: pxa25x_udc: fix use-before-initialized bug
2015-01-18 Stefan Roeseusb: gadget: f_dfu: Add get_alt function to pass the...
2015-01-18 Stefan Roeseusb: gadget: composite: Fix NULL pointer crash in USB...
2015-01-16 Simon Glasssunxi: Drop use of lowlevel_init()
2015-01-16 Simon Glasssunxi: Move SPL s_init() code to board_init_f()
2015-01-16 Simon Glassarm: Add warnings about using gdata
2015-01-16 Tom RiniTI ARMv7: Don't use GD before crt0.S has set it
2015-01-16 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-ti
2015-01-16 Masahiro Yamadapowerpc: 74xx_7xx: remove 74xx_7xx cpu support
2015-01-16 Masahiro Yamadampc8xx: remove unused linker script
2015-01-16 Masahiro Yamadappc4xx: remove dead code
2015-01-15 Alexey Brodkinarc: rename "arc700" in "arcv1"
2015-01-15 Alexey Brodkinboard/synopsys: remove selection of CPU from the board
2015-01-15 Alexey Brodkinarc: move common sources in library
2015-01-15 Alexey Brodkinarc: move linker script in arch/arc/cpu folder
2015-01-15 Alexey Brodkinarc: relocate - minor refactoring and clean-up
2015-01-15 Igor Guryanovarc: introduce separate section for interrupt vector...
2015-01-15 Alexey Brodkinarc: add dependences on MMU presence
2015-01-15 Igor Guryanovarc: interrupts - fix mask setup
2015-01-15 Igor Guryanovarc: add ECR (exception cause register) output
2015-01-15 Igor Guryanovarc: check caches existence before use
2015-01-15 Tom RiniMerge branch 'buildman' of git://git.denx.de/u-boot-x86
2015-01-15 Simon Glassbuildman: Add an option to write the full build output
2015-01-15 Simon Glassbuildman: Add the option to download toolchains from
2015-01-15 Simon Glassbuildman: Allow architecture to alias to multiple toolc...
2015-01-15 Simon Glassbuildman: Don't use the local settings when running...
2015-01-15 Simon Glassbuildman: Don't complain about missing sections in...
2015-01-15 Simon Glassbuildman: Add documentation about the .buildman file
2015-01-15 Simon Glassbuildman: Add a note about Python pre-requisites
2015-01-15 Simon Glassbuildman: Add an option to use the full tool chain...
2015-01-15 Simon Glassbuildman: Put the toolchain path first instead of last...
2015-01-15 Simon Glassbuildman: Try to avoid hard-coded string parsing
2015-01-15 Simon Glassbuildman: Allow specifying a range of commits to build
2015-01-15 Simon Glassbuildman: Don't remove entire output directory when...
2015-01-15 Simon Glassbuildman: Add an option to flatten output directory...
2015-01-15 Simon Glassbuildman: Try to guess the upstream commit
2015-01-15 Simon Glassbuildman: Don't prune output space for 'current source...
2015-01-15 Simon Glassbuildman: Put build in 'current', not 'current/current'
2015-01-15 Simon Glassbuildman: Add tests that check the correct output direc...
next