project/bcm63xx/u-boot.git
2014-06-30 Przemyslaw... Samsung: Goni: change maintainer to Robert Baldyga
2014-06-23 Jeroen HofsteePMIC: MAX77686: fix invalid bus check
2014-06-22 Michael PrattExynos: Split 5250 and 5420 memory bank configuration
2014-06-22 Akshay SaraswatExynos5: Config: Enable USB boot mode for all Exynos5...
2014-06-22 Akshay SaraswatExynos5: Config: Increase SPL footprint for Exynos5420
2014-06-22 Akshay SaraswatExynos5: Config: Place environment at the end of SPI...
2014-06-22 Akshay SaraswatExynos5420: Introduce support for the Peach-Pit board
2014-06-22 Akshay SaraswatExynos5420: Let macros be used for exynos5420
2014-06-22 Akshay SaraswatExynos: SPI: Fix reading data from SPI flash
2014-06-19 Przemyslaw... trats/trats2: exynos_power_init: return 0 if no battery...
2014-06-18 Tushar BeheraArndale: Enable preboot support
2014-06-18 Łukasz MajewskiFIX: config: goni: Change goni configuration to store...
2014-06-16 Łukasz MajewskiFIX: config: goni: Change goni configuration to use...
2014-06-13 Akshay SaraswatExynos5420: DMC: Add software read leveling
2014-06-13 Doug AndersonDMC: exynos5420: Gate CLKM to when reading PHY_CON13
2014-06-13 Akshay SaraswatExynos5420: Remove code for enabling read leveling
2014-06-13 Akshay SaraswatExynos5: DMC: Modify the definition of ddr3_mem_ctrl_init
2014-06-13 Minkyu KangRevert "exynos: Enable PSHOLD in SPL"
2014-06-09 Masahiro Yamadaarm: fix a double-definition error of _start symbol
2014-06-09 Mark Rutlandarm64: zero cntvoff_el2
2014-06-09 Chao Fuarm: vf610: Add QSPI support for VF610TWR
2014-06-09 Alison Wangarm: imx: Add two macros for VF610 in IOMUX_PAD structure
2014-06-09 Alison Wangarm: vf610: Add QSPI driver support
2014-06-08 Albert ARIBAUDMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
2014-06-06 Tom Riniarm:am43xx: Add TPS65218 support to scale voltages up
2014-06-06 Tom Rinipower: Add support for the TPS65218 PMIC
2014-06-06 Tom Riniarm:am33xx: Add a scale_vcores() hook
2014-06-06 Tom Riniam43xx: Only read the MPU frequency bits of CTRL_DEV_ATTR
2014-06-06 Hannes Petermaierboard/BuR/tseries: cosmetic changes
2014-06-06 Hannes Petermaierboard/BuR/common: Add CONFIG_CMD_I2C
2014-06-06 Hannes Petermaierboard/BuR/tseries: only run gpmc_init(...) in NAND...
2014-06-06 Hannes Petermaierboard/BuR/tseries: Add support for using 8-bit on eMMC
2014-06-06 Hannes Petermaierboard/BuR/common: introduce usage of CONFIG_SYS_GENERIC...
2014-06-06 Hannes Petermaierarch-am33xx: Add defines for timer0-7
2014-06-06 Lokesh VutlaARM: AM43xx: Fix UART clocks enabling
2014-06-06 Lokesh VutlaARM: AM43xx: Fix mmcboot command in EXTRA_ENV_SETTINGS
2014-06-06 Jeroen Hofsteetam3517: fix NAND detection
2014-06-06 WingMan Kwokkeystone: k2hk: enable support of nand ecclayout command
2014-06-06 Murali Karicherikeystone: init: enable UART1 to be able use it from...
2014-06-06 Tom Riniarm:am33xx: Rework s_init and add board_early_init_f
2014-06-06 Tom Riniarm:am33xx: Make dram_init call sdram_init() in some...
2014-06-06 Sourav Poddarti: qspi: populate slave device to set flash quad bit.
2014-06-06 Sourav Poddaram43xx_evm: Add qspiboot target
2014-06-06 pekon guptaam335x: update README for BCH16
2014-06-06 pekon guptamtd: nand: omap: add support for BCH16_ECC - NAND drive...
2014-06-06 pekon guptamtd: nand: omap_gpmc: use macro for register definitions
2014-06-06 pekon guptaomap3: remove remnant macros GPMC_NAND_ECC_LP_x8_LAYOUT...
2014-06-06 pekon guptamtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT...
2014-06-06 David Mosbergermtd: nand: fix GET/SET_FEATURES address on 16-bit devices
2014-06-06 Brian Norrismtd: nand: force NAND_CMD_READID onto 8-bit bus
2014-06-06 Brian Norrismtd: nand: don't use read_buf for 8-bit ONFI transfers
2014-06-06 pekon guptamtd: nand: omap: fix error-codes returned from omap...
2014-06-06 pekon guptamtd: nand: omap_gpmc: minor cleanup of omap_correct_dat...
2014-06-06 pekon guptamtd: nand: omap_gpmc: rename struct nand_bch_priv to...
2014-06-06 pekon guptamtd: nand: omap_gpmc: remove unused members of 'struct...
2014-06-06 pekon guptamtd: nand: omap_elm: use macros for register definitions
2014-06-06 pekon guptamtd: nand: omap_elm: use bch_type instead of nibble...
2014-06-06 pekon guptamtd: nand: omap_elm: remove #include omap_gpmc.h
2014-06-05 Stephen WarrenARM: tegra: enable USB device mode and UMS on some...
2014-06-02 Albert ARIBAUDMerge branch 'u-boot-samsung/master' into 'u-boot-arm...
2014-05-31 Doug AndersonExynos: Make sure ps_hold gets set in the SPL
2014-05-29 Piotr Wilczekarm:board:exynos4: add CONFIG_SYS_GENERIC_BOARD
2014-05-28 Simon Glassinitcall: Improve debugging support
2014-05-28 Simon Glassexynos: Enable the LCD backlight for snow
2014-05-28 Simon Glassexynos: dts: Enable LCD for snow
2014-05-28 Simon Glassexynos: Enable PSHOLD in SPL
2014-05-28 Aaron Durbinexynos5: support tps65090 pmic
2014-05-28 Aaron Durbinpower: Explicitly select pmic device's bus
2014-05-28 Aaron Durbinexynos5: Enable tps65090 on exynos5-dt
2014-05-28 Tom Wai-Hong Tampower: Add support for TPS65090 PMU chip.
2014-05-28 Simon Glasspower: Add PMIC_ prefix to CHARGER_EN/DISABLE
2014-05-28 Simon Glasspower: Rename CONFIG_PMIC_... to CONFIG_POWER_...
2014-05-28 Simon Glassexynos: Drop old smdk5250.c file
2014-05-28 Simon Glassexynos: dts: Correct EC interrupt GPIO
2014-05-26 Wu, JoshARM: at91sam9m10g45ek: add mmc environment configuratio...
2014-05-26 Wu, JoshARM: at91sam9m10g45ek: enable mci0 support
2014-05-26 Wu, JoshARM: at91: remove redundant ARM926EJS definition in...
2014-05-26 Wu, Joshat91: remove redundant AT91FAMILY definition in board...
2014-05-26 Wu, JoshARM: at91sam9x5: define the AT91FAMILY and ARM926EJS...
2014-05-26 Wu, JoshARM: at91: remove AT91X40 macro since it is not use...
2014-05-26 Andreas Bießmannsama5d3xek: enable PMECC header generation
2014-05-26 Andreas Bießmannarm:at91: enable ROM loadable atmel image
2014-05-26 Andreas Bießmannmkimage: add atmelimage
2014-05-26 Andreas Bießmanncorvus: remove unneeded CONFIG_AT91_LEGACY
2014-05-26 Wu, Joshmmc: atmel_mci: fix print incorrect buffer content...
2014-05-26 Wu, Joshgpio: at91: add sanity check for the NULL pointer
2014-05-26 Bo ShenARM: atmel: at91sam9x5ek: convert to generic board
2014-05-26 Bo ShenARM: atmel: at91sam9m10g45ek: convert to generic board
2014-05-26 Bo ShenARM: atmel: sama5d3_xplained: convert to generic board
2014-05-26 Bo ShenARM: atmel: sama5d3xek: convert to generic board
2014-05-26 Bo ShenARM: atmel: enable SPL on sama5d3_xplained board
2014-05-26 Bo ShenARM: atmel: switch to main crystal osc for SPL boot
2014-05-25 Ian Campbellnet/designware: Make DMA burst length configurable...
2014-05-25 Ian Campbellnet/designware: reorder struct dw_eth_dev to pack more...
2014-05-25 Ian Campbellnet/designware: ensure cache invalidations are aligned...
2014-05-25 Ian Campbellnet/designware: ensure device private data is DMA aligned.
2014-05-25 Ian Campbellsunxi: non-FEL SPL boot support for sun7i
2014-05-25 Ian Campbellsunxi: mmc support
2014-05-25 Ian Campbellsunxi: add gmac Ethernet support
2014-05-25 Ian Campbellsunxi: add support for Cubietruck booting in FEL mode
next