project/bcm63xx/u-boot.git
2014-01-03 Sergey Alyoshinarm: mx5: Add fuse supply enable in fsl_iim
2014-01-03 Otavio SalvadorARM: mx6: Allow enablement of FEC Anatop based clock...
2014-01-03 Otavio SalvadorARM: mx6: Change the FDT loading address to avoid overl...
2014-01-03 Otavio Salvadormx28evk: Extend environment to easy write of NAND system
2014-01-03 Otavio Salvadormx28evk: Add 'nandboot' environment command
2014-01-03 Otavio Salvadormx28evk: Use 512k for fdt partition to align it
2014-01-03 Otavio Salvadorimx: Easy enabling of SION per-pin using MUX_MODE_SION...
2014-01-02 Fabio Estevammx6: soc: Disable VDDPU regulator
2014-01-02 Fabio Estevammx6: soc: Add the required LDO ramp up delay
2014-01-02 Fabio Estevammx6: soc: Introduce set_ldo_voltage()
2014-01-02 Fabio Estevammx6: soc: Set the VDDSOC at 1.175 V
2014-01-02 Fabio Estevammx6: soc: Clear the LDO ramp values up prior to setting...
2014-01-02 Fabio Estevammx6: soc: Staticize set_vddsoc()
2014-01-02 Fabio Estevammx6sabre_common.h: Add CONFIG_CMD_FUSE support
2014-01-02 Fabio Estevamdoc: README.fuse: Add an example on how to use the...
2013-12-19 Stefano BabicMX6: fix sata compilation for i.MX6
2013-12-17 Frank Liimx6: fix random hang when download by usb
2013-12-17 Marek VasutARM: mxs: tools: Fix errno handling in strtoul() invocation
2013-12-17 Fabio Estevammx6sabresd: Fix LVDS width and color format
2013-12-17 Fabio Estevammx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK...
2013-12-17 Fabio Estevammx6: clock: Fix the calculation of PLL_ENET frequency
2013-12-17 Marek VasutARM: mx53: video: Add IPUv3 LCD support for M53EVK
2013-12-17 Liu YingMX6 SabreSD: Use readl() to read the CCM_CCGR3 register
2013-12-17 Eric NelsonARM: mx6: Update non-Freescale boards to include CPU...
2013-12-17 Fabio Estevamconfigs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
2013-12-17 Giuseppe Paganoudoo: Add SATA support on uDoo Board.
2013-12-17 Giuseppe Paganonitrogen6x: Move setup_sata to common part
2013-12-17 Eric Nelsoni.MX6 (DQ/DLS): use macros for mux and pad declarations
2013-12-17 Fabio Estevamimx: Explicitly pass the I2C bus number in pmic_init()
2013-11-28 Giuseppe Paganoudoo: Fix watchdog during kernel boot.
2013-11-28 Giuseppe Paganoudoo: Add ethernet support (FEC + Micrel KSZ9031).
2013-11-28 Giuseppe Paganoudoo: Move and optimize platform register setting.
2013-11-28 Fabio Estevammx6sabresd: Add SPI NOR support
2013-11-28 Fabio Estevammx6sabresd: Fix wrong colors in LVDS splash
2013-11-27 Fabio Estevampower: power_fsl: Pass p->bus in the same way for SPI...
2013-11-27 Fabio Estevamefikamx: Fix pmic_init() argument
2013-11-27 Fabio Estevammx31pdk: Fix pmic_init() argument
2013-11-27 Fabio Estevammx51evk: Fix pmic_init() argument
2013-11-27 Eric Nelsonimx-common: remove extraneous semicolon from macro
2013-11-27 Fabio Estevamnitrogen6x: Remove unused OCOTP options
2013-11-21 Marek VasutNet: FEC: Fix huge memory leak
2013-11-13 Eric Nelsoni.MX6DQ/DLS: whitespace: Align IOMUX_PAD column in...
2013-11-13 Eric Nelsoni.MX6DQ/DLS: remove unused pad declarations
2013-11-13 Eric Nelsoni.MX6DQ: Add Pinmux settings that are present in mainli...
2013-11-13 Eric Nelsoni.MX6DQ/DLS: remove useless mux/pad declarations
2013-11-13 Eric Nelsoni.MX6DQ/DLS: replace pad names with their Linux kernel...
2013-11-13 Stefan Roesemx6: titanium: Move BSP code to barco board directory
2013-11-13 Fabio Estevamtitanium: Return the error when cpu_eth_init() fails
2013-11-13 Fabio Estevamwandboard: Return the error when cpu_eth_init() fails
2013-11-13 Fabio Estevamwandboard: Return the error immediately when ipuv3_fb_i...
2013-11-13 Michael Heimpoldmxs_gpio: fix the handling in gpio_direction_output()
2013-11-13 Fabio Estevamconfigs: imx: Make CONFIG_SYS_PROMPT uniform across...
2013-11-12 Samuel Egliarm, am335x: update for the siemens boards
2013-11-12 Heiko Schocherusb, g_dnl: make bcdDevice value configurable
2013-11-11 Tom Riniomap730p2: Remove board
2013-11-11 Tom Riniam33xx: Make SoC bootcount driver have its own symbol
2013-11-11 Igor Grinbergcm-t35: use gpio_led driver for status led
2013-11-11 Andrew Bradfordam335x_evm: Fix CONS_INDEX numbering
2013-11-11 Matt Porterboards.cfg: update email address for ti814x_evm maintainer
2013-11-11 Heiko Schocherarm, am33x: make RTC32K OSC enable configurable
2013-11-11 Heiko Schocherbootcount: store bootcount var in environment
2013-11-09 Albert ARIBAUDMerge branch 'iu-boot/master' into 'u-boot-arm/master'
2013-11-08 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-usb
2013-11-08 Rob Herringsandbox: convert to common time functions
2013-11-08 Rob Herringtime: add weak annotation to timer_read_counter declaration
2013-11-08 Suriyan Ramasaminetconsole loses 2nd character of input
2013-11-08 Axel Linserial: s5p: Staticize local functions
2013-11-08 Pierre Aubertenv: fix the env export varname
2013-11-08 Mark Langsdorfhighbank: set AUTOBOOT_KEYED_CTRLC config option
2013-11-08 Mark Langsdorfautoboot: add an option to override keyed autoboot
2013-11-08 Axel Linserial: xuartlite: Staticize local functions
2013-11-08 Axel Linserial: mxs_auart: Staticize local functions
2013-11-08 Piotr Wilczekfs:fat: fix set file name function
2013-11-08 Luka Perkovcmd_zfs: normalize 'file not found' errors
2013-11-08 Luka Perkovcmd_reiser: normalize 'file not found' errors
2013-11-08 Tim Harveycmd_ubifs: normalize 'file not found' errors
2013-11-08 Masahiro Yamadainclude: delete include/linux/config.h
2013-11-08 Egbert Eichconfig/sandbox: Add EFI and GPT support
2013-11-08 Egbert Eichconfig: Define HAVE_BLOCK_DEVICE when CONFIG_CMD_GPT...
2013-11-08 Egbert Eichcmd/gpt: Support gpt command for all devices
2013-11-08 Masahiro Yamadacosmetic: UDM-net: clean up the remainders of dead...
2013-11-08 Masahiro Yamadacosmetic: UDM-serial: clean up the remainders of dead...
2013-11-08 Masahiro Yamadacosmetic: doc: driver-model: Do not number driver lists
2013-11-08 Bo Shenusb: dfu: make nand upload working
2013-11-08 Heiko Schocherusb, g_dnl: make iSerialNumber board configurable
2013-11-08 Bo Shenusb: dfu: correct dfu buffer inited value
2013-11-08 Bo Shenusb: dfu: decrease dfu->r_left along with the transfer
2013-11-08 Mateusz Kulikowskiusb: ohci-hcd: submit_common_msg: report actual_length...
2013-11-08 Przemyslaw... usb: ums: add ums exit feature by ctrl+c or by detach...
2013-11-08 Przemyslaw... usb: ums: move ums code from trats to Samsung common...
2013-11-08 Przemyslaw... usb: ums: fix disk capacity miscalculation and code...
2013-11-08 Przemyslaw... usb: ums: allows using every mmc device with ums.
2013-11-08 Przemyslaw... usb: ums: code refactoring to improve reusability on...
2013-11-08 Igor GrinbergREADME: remove wrong config name
2013-11-08 Masahiro Yamadacosmetic: remove empty lines at the top of file
2013-11-08 Miao Yancommon/cmd_bootm.c: fix subcommand processing in OS...
2013-11-08 Masahiro YamadaMakefile: do not create a symbolic link to arch/${ARCH...
2013-11-08 Viktar PalstsiukAdd support for SX151x SPI GPIO Expanders
2013-11-08 Luka Perkovboards.cfg: remove git leftovers
2013-11-08 Paul Burtonboards.cfg: remove trailing whitespace
next