openwrt/staging/blogic.git
2015-12-03 James Bottomleympt3sas: fix Kconfig dependency problem for mpt2sas...
2015-12-01 Martin K. Petersenmpt3sas: Add dummy Kconfig option for backwards compati...
2015-12-01 Bart Van AsscheFix a memory leak in scsi_host_dev_release()
2015-11-26 Martin K. Petersenblock/sd: Fix device-imposed transfer length limits
2015-11-26 Douglas Gilbertscsi_debug: fix prevent_allow+verify regressions
2015-11-26 Martin K. PetersenMAINTAINERS: Add myself as co-maintainer of the SCSI...
2015-11-26 Martin K. Petersensd: Make discard granularity match logical block size...
2015-11-20 Arnd Bergmannscsi: hpsa: select CONFIG_SCSI_SAS_ATTR
2015-11-20 Arnd Bergmannscsi: advansys needs ISA dma api for ISA support
2015-11-19 Vitaly Kuznetsovscsi_sysfs: protect against double execution of __scsi_...
2015-11-19 Maurizio Lombardist: fix potential null pointer dereference.
2015-11-19 Vitaly Kuznetsovscsi: report 'INQUIRY result too short' once per host
2015-11-18 Arnd Bergmannadvansys: fix big-endian builds
2015-11-17 Bart Van Asscheqla2xxx: Fix rwlock recursion
2015-11-13 Dan Carpenterhpsa: logical vs bitwise AND typo
2015-11-13 Dan Carpentermvsas: don't allow negative timeouts
2015-11-13 Sreekanth Reddympt3sas: Fix use sas_is_tlr_enabled API before enabling...
2015-11-12 Gabriel Krisman... sd: Clear PS bit before Mode Select.
2015-11-12 Laurent Vivieribmvscsi: set max_lun to 32
2015-11-12 Laurent Vivieribmvscsi: display default value for max_id, max_lun...
2015-11-12 Dan Carpentermptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
2015-11-12 Alison Schofieldscsi: pmcraid: replace struct timeval with ktime_get_re...
2015-11-12 Tina Ruchandanimvumi: 64bit value for seconds_since1970
2015-11-12 Tim Gardnerbe2iscsi: Fix bogus WARN_ON length check
2015-11-12 Vitaly Kuznetsovscsi_scan: don't dump trace when scsi_prep_async_scan...
2015-11-12 Sreekanth Reddympt3sas: Bump mpt3sas driver version to 09.102.00.00
2015-11-12 Sreekanth Reddympt3sas: Single driver module which supports both SAS...
2015-11-12 Sreekanth Reddympt2sas, mpt3sas: Update the driver versions
2015-11-12 Sreekanth Reddympt3sas: setpci reset kernel oops fix
2015-11-12 Sreekanth Reddympt3sas: Added OEM Gen2 PnP ID branding names
2015-11-12 Sreekanth Reddympt3sas: Refcount fw_events and fix unsafe list usage
2015-11-11 Sreekanth Reddympt3sas: Refcount sas_device objects and fix unsafe...
2015-11-11 Sreekanth Reddympt3sas: sysfs attribute to report Backup Rail Monitor...
2015-11-11 Sreekanth Reddympt3sas: Ported WarpDrive product SSS6200 support
2015-11-11 Sreekanth Reddympt3sas: fix for driver fails EEH, recovery from inject...
2015-11-11 Sreekanth Reddympt3sas: Manage MSI-X vectors according to HBA device...
2015-11-11 Sreekanth Reddympt3sas: Don't send PHYDISK_HIDDEN RAID action request...
2015-11-11 Sreekanth Reddympt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL...
2015-11-11 Sreekanth Reddympt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry...
2015-11-11 Sreekanth Reddympt3sas: Define 'hba_mpi_version_belonged' IOC variable
2015-11-11 Sreekanth Reddympt2sas: Remove .c and .h files from mpt2sas driver
2015-11-11 Sreekanth Reddympt2sas: Move Gen2 HBA's device registration to a separ...
2015-11-11 Sreekanth Reddympt3sas: Move Gen3 HBA's device registration to a separ...
2015-11-11 Sreekanth Reddympt3sas: Added mpt2sas driver definitions
2015-11-11 Christoph Hellwigmpt2sas: Use mpi headers from mpt3sas
2015-11-10 Benjamin Roodpm80xx: remove the SCSI host before detaching from...
2015-11-10 Jack Wangmvsas: remove SCSI host before detaching from SAS transport
2015-11-10 Jack Wangaic94xx: remove SCSI host before detaching from SAS...
2015-11-10 Jack Wangisci: remove SCSI host before detaching from SAS transport
2015-11-10 Gabriel Krisman... ipr: Driver version 2.6.3.
2015-11-10 Gabriel Krisman... ipr: Issue Configure Cache Parameters command.
2015-11-10 Gabriel Krisman... ipr: Inquiry IOA page 0xC4 during initialization.
2015-11-10 Gabriel Krisman... ipr: Don't set NO_ULEN_CHK bit when resource is a vset.
2015-11-10 Gabriel Krisman... ipr: Add delay to ensure coherent dumps.
2015-11-09 Yaniv Gardiscsi: ufs-qcom: add QUniPro hardware support and power...
2015-11-09 Yaniv Gardiscsi: ufs-qcom: add debug prints for test bus
2015-11-09 Yaniv Gardiscsi: ufs: make the UFS variant a platform device
2015-11-09 Yaniv Gardiscsi: ufs: creates wrapper functions for vops
2015-11-09 Yaniv Gardiscsi: ufs: add ufshcd_get_variant ufshcd_set_variant
2015-11-09 Yaniv Gardiscsi: ufs-qcom: update configuration option of SCSI_UFS...
2015-11-09 Yaniv Gardiscsi: ufs-qcom: fix compilation warning if compiled...
2015-11-09 Yaniv Gardiphy: qcom-ufs: fix build error when the component is...
2015-11-09 Tomas Henzlhpsa: move lockup_detected attribute to host attr
2015-11-09 Don Bracehpsa: bump the driver version
2015-11-09 Kevin Barnetthpsa: add in sas transport class
2015-11-09 Rasmus Villemoeshpsa: fix multiple issues in path_info_show
2015-11-09 Don Bracehpsa: enhance device messages
2015-11-09 Scott Teelhpsa: disable report lun data caching
2015-11-09 Scott Teelhpsa: add discovery polling for PT RAID devices.
2015-11-09 Scott Teelhpsa: eliminate fake lun0 enclosures
2015-11-09 Scott Teelhpsa: generalize external arrays
2015-11-09 Kevin Barnetthpsa: move scsi_add_device and scsi_remove_device calls...
2015-11-09 Kevin Barnetthpsa: refactor hpsa_figure_bus_target_lun
2015-11-09 Don Bracehpsa: enhance hpsa_get_device_id
2015-11-09 Kevin Barnetthpsa: add function is_logical_device
2015-11-09 Kevin Barnetthpsa: simplify update scsi devices
2015-11-09 Kevin Barnetthpsa: simplify check for device exposure
2015-11-09 Don Bracehpsa: correct ioaccel2 sg chain len
2015-11-09 Don Bracehpsa: correct check for non-disk devices
2015-11-09 Scott Teelhpsa: fix physical target reset
2015-11-09 Don Bracehpsa: fix hpsa_adjust_hpsa_scsi_table
2015-11-09 Don Bracehpsa: correct transfer length for 6 byte read/write...
2015-11-09 Don Bracehpsa: abandon rescans on memory alloaction failures.
2015-11-09 Don Bracehpsa: allow driver requested rescans
2015-11-09 Don Bracehpsa: fix null device issues
2015-11-09 Don Bracehpsa: check for null arguments to dev_printk
2015-11-09 Don Bracehpsa: change devtype to unsigned
2015-11-09 Don Bracehpsa: remove unused hpsa_tag_discard_error_bits
2015-11-09 Don Bracehpsa: stop zeroing reset_cmds_out and ioaccel_cmds_out...
2015-11-09 Don Bracehpsa: remove unused parameter hostno
2015-11-09 Peter Oberparleiterscsi_sysfs: Fix queue_ramp_up_period return code
2015-11-09 Johannes Thumshirnscsi: Export SCSI Inquiry data to sysfs
2015-11-09 Sumit Saxenamegaraid_sas: Fix sparse warning
2015-11-09 Sumit Saxenamegaraid_sas: Make tape drives visible on PERC5 controllers
2015-11-03 Calvin Owenssg: Fix double-free when drives detach during SG_IO
2015-11-03 Benjamin Roodpm80xx: avoid a panic if MSI(X) interrupts are disabled
2015-11-03 Benjamin Roodpm80xx: wait a minimum of 500ms before issuing commands...
2015-11-03 Benjamin Roodpm80xx: do not examine registers for iButton feature...
2015-11-03 Benjamin Roodpm80xx: set PHY profiles for ATTO 12Gb SAS controllers
2015-11-03 Benjamin Roodpm80xx: add support for ATTO devices during SAS address...
next