project/bcm63xx/u-boot.git
2018-10-08 Simon Glasstest: Tidy up comments and variable name
2018-10-08 Simon Glasstest: Print the name of each test before running it
2018-10-08 Simon Glasstest: Simplify the PATH setup
2018-10-08 Simon GlassMakefile: Add a 'check' target for make
2018-10-08 Simon Glassbuildman: Make the toolchain test more forgiving
2018-10-08 Simon Glasstest/py: Fix unicode handling for log filtering
2018-10-08 Simon Glasspatman: Handle unicode in _ProjectConfigParser tests
2018-10-08 Simon Glasssandbox: Unprotect DATA regions in bus tests
2018-10-07 Jens WiklanderKconfig: sandbox: enable cmd_avb and dependencies
2018-10-07 Jens Wiklanderavb_verify: support sandbox configuration
2018-10-07 Jens Wiklandertest_avb: Update pymark.buildconfigspec information...
2018-10-07 Jens Wiklanderavb_verify: support using OP-TEE TA AVB
2018-10-07 Jens Wiklandertest: tee: test TEE uclass
2018-10-07 Jens Wiklandertee: add sandbox driver
2018-10-07 Jens Wiklandersandbox: imply CONFIG_TEE (TEE uclass)
2018-10-07 Jens Wiklandersandbox: dt: add sandbox_tee node
2018-10-07 Jens Wiklandertee: optee: support AVB trusted application
2018-10-07 Jens Wiklanderoptee: support routing of rpmb data frames to mmc
2018-10-07 Jens Wiklanderarm: dt: hikey: Add optee node
2018-10-07 Jens WiklanderDocumentation: tee uclass and op-tee driver
2018-10-07 Jens Wiklandertee: add OP-TEE driver
2018-10-07 Jens Wiklanderdt/bindings: add bindings for optee
2018-10-07 Jens WiklanderAdd UCLASS_TEE for Trusted Execution Environment
2018-10-07 Jens Wiklandermmc: rpmb: add mmc_rpmb_route_frames()
2018-10-07 Jens Wiklandercmd: avb: print error message if command fails
2018-10-07 Jens Wiklandercmd: avb read_rb: print rb_idx in hexadecimal
2018-10-07 Jens Wiklanderdm: fdt: scan for devices under /firmware too
2018-10-06 Michal Simekspl: spi: Do not hardcode fixed size for header
2018-10-06 Michal Simekspl: ram: Fix u_boot_pos calculation
2018-10-06 Patrice Chotardmach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7
2018-10-06 Heinrich Schuchardtfs: fat: fix set_cluster()
2018-10-06 Heinrich Schuchardtfs: fat: memory leak in fat_unlink()
2018-10-06 Adam FordARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection
2018-10-06 Adam FordARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35...
2018-10-06 Adam FordARM: DTS: Add support for Logic PD OMAP35 Torpedo ...
2018-10-06 Adam FordARM: DTS: Remove unnecessary u-boot.dtsi options from...
2018-10-06 Adam FordARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with...
2018-10-06 Liviu Dudaumisc: Add support for the Arm Versatile Express config bus
2018-10-06 Simon Goldschmidtconfigs: drop CONFIG_SYS_EXTRA_ENV_RELOC
2018-10-06 Akashi Takahirotest/py: test_fs: add docstring comments to helper...
2018-10-06 Akashi Takahirotest/py: test_fs: remove fs_type argument from umount_fs()
2018-10-06 Stephen Warrentest/py: ignore console read exceptions after test...
2018-10-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-sh
2018-10-06 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-socfpga
2018-10-05 Tom RiniMerge tag 'rockchip-for-v2018.11-rc2' of git://git...
2018-10-05 Tom RiniMerge tag 'arc-updates-for-2018.11-rc2' of git://git...
2018-10-05 Alexey Brodkinarc: Add support for IoT development kit
2018-10-05 Alexey BrodkinARC: Enable DISPLAY_CPUINFO & DISPLAY_BOARDINFO
2018-10-05 Alexey BrodkinARC: Implement print_cpuinfo()
2018-10-05 Alexey BrodkinARC: Add model property to boards .dts
2018-10-05 Alexey BrodkinARC: Don't pre-define CROSS_COMPILE
2018-10-04 Daniel Gröberrockchip: Fix rkimage format for SPL boot over USB
2018-10-04 Andreas Färberrockchip: make_fit_atf.py depends on u-boot
2018-10-04 Janine Hagemannnet: gmac_rockchip: Add handling for RGMII_ID/RXID...
2018-10-04 Janine Hagemannnet: gmac_rockchip: Fix a register write in rk3328_gmac...
2018-10-04 Mian Yousaf... rockchip: make_fit_atf: make python3 compatible
2018-10-04 Mian Yousaf... rockchip: make_fit_atf: use elf entry point
2018-10-04 Kever Yangrockchip: add fit source file for pack itb with op-tee
2018-10-04 Kever Yangspl: add support to booting with OP-TEE
2018-10-04 Kever Yangrockchip: make_fit_atf: fix warning unit_address_vs_reg
2018-10-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2018-10-04 Stefan Roesespi: Add SPI driver for MT76xx SoCs
2018-10-04 Stefan Roesemtd: nand: spi: Add Gigadevice SPI NAND support
2018-10-04 Stefan Roesesf: Add XMC xm25qh64a and xm25qh128a entries
2018-10-03 Tom RiniMerge tag 'rockchip-for-v2018.11' of git://git.denx...
2018-10-03 Tom RiniMerge git://git.denx.de/u-boot-riscv
2018-10-03 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-i2c
2018-10-03 Ooi, Joycearm: socfpga: stratix10: add sgmii in phymode setup
2018-10-03 Ley Foon Tanarm: socfpga: Remove unused function socfpga_emac_manag...
2018-10-03 Atsushi Nemototools: socfpga: fix sfp_verify_header
2018-10-03 Ley Foon Tangpio: dwapb_gpio: Change to use devm_kcalloc()
2018-10-03 Marek VasutARM: rmobile: Enable PHY framework on Gen3
2018-10-03 Marek Vasutphy: rcar: Add R-Car Gen3 PHY driver
2018-10-03 Marek VasutARM: rmobile: Mark 4-64GiB as DRAM on Gen3
2018-10-03 Marek VasutARM: rmobile: Repair TMU clock on Gen2
2018-10-03 Marek VasutARM: dts: rmobile: Reinstate missing i2c6 on Porter
2018-10-03 Heinrich Schuchardtriscv: allow native compilation
2018-10-03 Rick Chenriscv: cosmetic: Reword do_reset() printf message.
2018-10-03 Bin Mengriscv: Move do_reset() to a common place
2018-10-03 Bin Mengriscv: Add QEMU virt board support
2018-10-03 Bin Mengriscv: kconfig: Imply DM support for some common drivers
2018-10-03 Bin Mengriscv: kconfig: Select DM and OF_CONTROL
2018-10-03 Bin Mengriscv: ae350: Clean up mixed tabs and spaces in the dts
2018-10-03 Bin Mengriscv: Make start.S available for all targets
2018-10-03 Bin Mengriscv: bootm: Pass mhartid CSR value to kernel
2018-10-03 Bin Mengriscv: Remove CSR read/write defines in encoding.h
2018-10-03 Bin Mengriscv: Add a helper routine to print CPU information
2018-10-03 Bin Mengriscv: Explicitly pass -march and -mabi to the compiler
2018-10-03 Bin Mengriscv: Fix coding style issues in the linker script
2018-10-03 Bin Mengriscv: Move the linker script to the CPU root directory
2018-10-03 Bin Mengriscv: cmd: bdinfo: Print the relocation address
2018-10-03 Bin Mengriscv: Remove mach type
2018-10-03 Bin Mengriscv: bootm: Correct the 1st kernel argument to hart id
2018-10-03 Bin Mengriscv: Remove setup.h
2018-10-03 Bin Mengriscv: kconfig: Normalize architecture name spelling
2018-10-03 Liviu Dudaui2c: Add support for the Arm's Versatile Express I2C...
2018-10-02 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2018-10-02 Marek Vasutspi: sh_qspi: Add DM support to SH QSPI driver
2018-10-02 Ashish Kumardriver/spi: fsl_qspi: Remove non-DM stuff
2018-10-02 Ley Foon Tanspi: designware_spi: Add reset ctrl to driver
next