openwrt/staging/blogic.git
2009-12-28 Juuso Oikarinenwl1271: Add support for acx_pm_config
2009-12-28 Juuso Oikarinenwl1271: Change booleans in struct wl1271 into a flags...
2009-12-28 Juuso Oikarinenwl1271: Fix supported rate management
2009-12-28 Juuso Oikarinenwl1271: Change rates configured for templates
2009-12-28 Juuso Oikarinenwl1271: Add rudimentary ad-hoc support
2009-12-28 Juuso Oikarinenwl1271: Remove beacon-loss-ind from PSM entry failure...
2009-12-28 Juuso Oikarinenwl1271: Add pre-power-on sleep
2009-12-28 Juuso Oikarinenwl1271: Implement chipset boot retry
2009-12-28 Juuso Oikarinenwl1271: prevent power save entry while not associated
2009-12-28 Juuso Oikarinenwl1271: Fix event acknowledging functionality
2009-12-28 Juuso Oikarinenwl1271: Use slow rates for association messages
2009-12-28 Juuso Oikarinenwl1271: Remove smart reflex ACX
2009-12-28 Juuso Oikarinenwl1271: Configure smart-reflex paramter values.
2009-12-28 Luciano Coelhowl1271: use channel 1 when configuring the data path
2009-12-28 Luciano Coelhowl1271: some new configuration values according to...
2009-12-28 Luciano Coelhowl1271: upload only the first 468 bytes from the NVS...
2009-12-28 Luciano Coelhowl1271: add gpio_power file in debugfs to power the...
2009-12-28 Luciano Coelhowl1271: fix one typo in the rx_rssi_and_proc_compens...
2009-12-28 Luciano Coelhowl1271: implement dco itrim parameters setting
2009-12-28 Luciano Coelhowl1271: use the correct macro when setting the basic...
2009-12-28 Luciano Coelhowl1271: set null data template when BSSID is known
2009-12-28 Luciano Coelhowl1271: check result code from the join command
2009-12-28 Luciano Coelhowl1271: limit TX power to 25dBm for every channel
2009-12-28 Luciano Coelhowl1271: remove workaround for disconnection
2009-12-28 Luciano Coelhowl1271: use join command with dummy BSSID
2009-12-28 Luciano Coelhowl1271: added radio parameters configuration values...
2009-12-28 Luciano Coelhowl1271: update radio and general parameters values
2009-12-28 Luciano Coelhowl1271: updated general parameters structure for newer...
2009-12-28 Luciano Coelhowl1271: updated radio parameters structure for newer...
2009-12-28 Larry Fingerb43: Allow PIO mode to be selected at module load
2009-12-28 Lennert Buytenhekmwl8k: remove duplicate local per-vif copy of ieee80211...
2009-12-28 Lennert Buytenhekmwl8k: remove unused mwl8k_vif::priv
2009-12-28 Lennert Buytenhekmwl8k: fix up AP vs. STA firmware image receive descrip...
2009-12-28 Lennert Buytenhekmwl8k: do rx/tx ring initialisation after loading firmware
2009-12-28 Lennert Buytenhekmwl8k: get rid of the struct mwl8k_firmware abstraction
2009-12-28 Lennert Buytenhekmwl8k: add 2.4GHz channels 12, 13 and 14
2009-12-28 Lennert Buytenhekmwl8k: initialize the mwl8k_info_tbl table using the...
2009-12-28 Lennert Buytenhekmwl8k: inline qos field manipulation functions
2009-12-28 Lennert Buytenhekmwl8k: get rid of the AMSDU check in the transmit path
2009-12-28 Lennert Buytenhekmwl8k: hw is never NULL in mwl8k_set_radio_preamble()
2009-12-28 Lennert Buytenhekmwl8k: firmware command code cleanup
2009-12-28 John W. LinvilleMerge git://git./linux/kernel/git/linville/wireless-2.6
2009-12-22 Sujithath9k: Fix TX poll routine
2009-12-22 Sujithath9k: Remove ANI lock
2009-12-22 Sujithath9k: Clarify Interrupt mitigation
2009-12-22 Emese Revfyiwlwifi: Constify struct iwl_ops
2009-12-22 Johannes Bergiwlwifi: use new mac80211 SMPS
2009-12-22 Stefan Seyfriedzd1211rw: improve ejecting of fake CDROM
2009-12-22 Stefan Seyfriedar9170usb: add Sphairon Homelink 1202 USB ID
2009-12-22 Luis R. Rodriguezmac80211: only bother printing highest data rate on...
2009-12-22 Luis R. Rodriguezmac80211: parse the HT capabilities info through debugfs
2009-12-22 Luis R. Rodriguezmac80211: make debugfs mcs set entry reflect 16 bits
2009-12-22 Luis R. Rodriguezath9k: add MCS rate index back to debufs rcstat
2009-12-22 Jouni Malinenmac80211_hwsim: Check all local addresses for TX Ack...
2009-12-22 Johannes Bergmac80211: disallow fixing bitrates with hw rate control
2009-12-22 Joe Perchesiwmc3200wifi: Avoid an offset calculation for each...
2009-12-22 Holger Schuriglibertas: remove priv->ratebitmap
2009-12-22 Holger Schuriglibertas: remove priv->capability
2009-12-22 Holger Schuriglibertas: make mesh configurable
2009-12-22 Holger Schuriglibertas: add access functions for mesh open/connect...
2009-12-22 Holger Schuriglibertas: move mesh SSID initialization into mesh.c
2009-12-22 Holger Schuriglibertas: decouple mesh and rtap
2009-12-22 Holger Schuriglibertas: move mesh-related definitions into mesh.h
2009-12-22 Holger Schuriglibertas: remove mesh_autostart_enabled and sync_channel
2009-12-22 Holger Schuriglibertas: use priv->mesh_tlv instead of priv->mesh_fw_ver
2009-12-22 Johannes Bergmac80211: dont try to use existing sta for AP
2009-12-22 Johannes Bergcfg80211: avoid sending spurious deauth to userspace
2009-12-22 Johannes Bergmac80211: allow disabling 40MHz on 2.4GHz
2009-12-22 Johannes Bergmac80211_hwsim: implement ampdu action
2009-12-22 Johannes Bergmac80211: enable spatial multiplexing powersave
2009-12-22 Zhu Yiiwmc3200wifi: rx aggregation support
2009-12-22 Zhu Yiwireless: add ieee80211_amsdu_to_8023s
2009-12-22 gregor kowskimac80211 : fix a race with update_tkip_key
2009-12-21 Gertjan van... rt2x00: Fix trimming of L2 padded frames.
2009-12-21 Benoit Papillaultrt2x00: Fix rt2800usb RX frame format and as such L2PAD
2009-12-21 Benoit PAPILLAULTrt2x00: Disable RX aggregation for rt2800usb
2009-12-21 Gertjan van... rt2x00: Only remove L2 padding in received frames if...
2009-12-21 Gertjan van... rt2x00: Reorganize L2 padding inserting function.
2009-12-21 Gertjan van... rt2x00: Remove SKBDESC_L2_PADDED flag.
2009-12-21 Gertjan van... rt2x00: Further L2 padding fixes.
2009-12-21 Alban Browaeysrt2x00 : trim the skb after having the l2pad removed.
2009-12-21 Alban Browaeysrt2x00 : avoid timestamp for monitor injected frame.
2009-12-21 Alban Browaeysrt2x00 : modify padding location.
2009-12-21 Alban Browaeysrt2x00 : bail out of regbusy_read if device is removed.
2009-12-21 Kenichi HORIOrt73usb: add WLI-U2-H54HP
2009-12-21 Wey-Yi Guyiwlwifi: remove extra error msg on sensitivity calibration
2009-12-21 Wey-Yi Guyiwlwifi: on-screen event log dump
2009-12-21 Wey-Yi Guyiwlwifi: add continuous uCode event log capability
2009-12-21 Wey-Yi Guyiwlwifi: dump "Control and Status Register" when detect...
2009-12-21 Wey-Yi Guyiwlwifi: log CT_CARD_DISABLED flag
2009-12-21 John W. Linvillewireless: support internal statically compiled regulato...
2009-12-21 Kalle Valomac80211: remove payload alignment warning
2009-12-21 Larry Fingerrtl8180: Remove usage of deprecated 'qual'
2009-12-21 Jussi Kivilinnarndis_wlan: copy module parameters for bcm4320a devices too
2009-12-21 Jussi Kivilinnarndis_wlan: move copy of module parameters to separate...
2009-12-21 Kalle Valowl1251: enable WMM
2009-12-21 Kalle Valowl1251: update tx_hdr when aliging skb in tx
2009-12-21 Kalle Valowl1251: implement WMM
2009-12-21 Kalle Valowl1251: implement wl1251_acx_tid_cfg()
2009-12-21 Kalle Valowl1251: implement acx_ac_cfg to configure hardware...
next