project/bcm63xx/u-boot.git
2014-01-17 Masahiro Yamadacosmetic: uImage.FIT: fix documents
2014-01-17 Bhupesh Sharmavexpress/armv8: Fix incorrect ethernet controller
2014-01-17 Łukasz MajewskiARM: trats2: dfu: Enable default Poll Timeout for Trats...
2014-01-17 Łukasz Majewskiconfig: Update envs for trats and trats2 - Disable...
2014-01-17 Łukasz Majewskiconfig: Update envs for trats and trats2 - new entries...
2014-01-16 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-15 Nobuhiro Iwamatsuarm: koelsch: Add support QSPI device and enable boot...
2014-01-15 Nobuhiro Iwamatsuarm: lager: Add support QSPI device and enable boot...
2014-01-15 Nobuhiro Iwamatsuspi: sh_qspi: Add header file that defines the address...
2014-01-15 Nobuhiro Iwamatsuarm: rmobile: Add SH QSPI base register address
2014-01-15 Nobuhiro Iwamatsuarm: lager: Disable TMU0 before OS boot
2014-01-15 Nobuhiro Iwamatsuarm: koelsch: Disable TMU0 before OS boot
2014-01-15 Albert ARIBAUDMerge branch 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-15 Fabio Estevammx6: Add initial support for the Hummingboard solo
2014-01-15 Fabio Estevammx6: clock: Pass the frequency as argument of enable_fe...
2014-01-14 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-14 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-net
2014-01-14 Fabio Estevamnet: phy: atheros: Fix the masks for AR8031/8035
2014-01-14 Minkyu Kangmmc: dwmmc: mode change to 0644
2014-01-14 Heiko Schochercommon, env: optimize boottime
2014-01-14 Ezequiel Garciaboard: nios2: Add CONFIG_CFI_FLASH_MTD guard to flash...
2014-01-14 Simon Glassbootm: Reinstate special case for standalone images
2014-01-14 Przemyslaw... fuelgauge: max17042: fix i2c read issue which causes...
2014-01-14 miao.yan@windriver.comcommon/image.c: move VxWorks header string out of CONFI...
2014-01-14 Andrew Gabbasovcommand.c: Fix auto-completion for the full commands...
2014-01-14 Antonios Vamporakislzma: fix buffer bound check error
2014-01-14 Andreas Bießmannarm: use canonical sub mnemonic
2014-01-14 Albert ARIBAUDMerge 'u-boot-imx/master' into 'u-boot-arm/master'
2014-01-14 Albert ARIBAUDarm: put .hash, .got.plt and .machine_param back in...
2014-01-14 Albert ARIBAUDmx1ads: remove board support
2014-01-14 Albert ARIBAUDmini2440: remove board support
2014-01-13 Tom RiniPrepare v2014.01-rc3
2014-01-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-spi
2014-01-13 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-video
2014-01-13 Marek VasutARM: pxa: Fix OneNAND window access on VPAC270
2014-01-13 Marek VasutARM: pxa: Fix OneNAND SPL builds
2014-01-13 Przemyslaw... usb: ums: wait for usb cable connection before enter...
2014-01-13 Inderpal Singhusb: exynos5: arndale: Add network support
2014-01-13 Inderpal Singhusb: ehci: exynos: set/reset hsic phys
2014-01-13 Kuo-Jung Suusb: gadget: fotg210: EP0 fifo empty indication is...
2014-01-13 Kuo-Jung Suusb: gadget: fotg210: add w1c interrupt status support
2014-01-13 Fabio Estevammx6slevk: Include "mx6_common.h"
2014-01-13 Christian Gmeinerimx6: make use of lldiv(..)
2014-01-13 John Weberwandboard: Set default environment to use zImage
2014-01-13 Otavio Salvadormx6sabresd: Add eMMC specific environment to allow...
2014-01-13 Fabio Estevammx6slevk: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevammx6sabresd: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevammx6qsabreauto: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevammx6qarm2: Remove unneeded error message when cpu_eth_in...
2014-01-13 Fabio Estevamtitanium: Return from cpu_eth_init() directly
2014-01-13 Fabio Estevamwandboard: Return from cpu_eth_init() directly
2014-01-12 Liu Yingvideo: ipu reg: Correct reserved array size in struct...
2014-01-12 Liu Yingvideo: ipu reg: Correct reserved1 array size in struct...
2014-01-12 Siva Durga... sf: params: Removed flag SECT_4K for Micron N25Q128
2014-01-12 Jagannadha... doc: SPI: Update status.txt
2014-01-12 Jagannadha... sf: Add CONFIG_SF_DUAL_FLASH
2014-01-12 Jagannadha... sf: Add dual memories support - DUAL_PARALLEL
2014-01-12 Jagannadha... sf: Add dual memories support - DUAL_STACKED
2014-01-12 Jagannadha... sf: ops: Unify read_ops bank configuration
2014-01-12 Jagannadha... sf: Code cleanups
2014-01-11 Jagannadha... sf: Divide flash register ops from QEB code
2014-01-11 Jagannadha... sf: probe: Enable macronix quad read/write cmds support
2014-01-11 Jagannadha... sf: Add macronix set QEB support
2014-01-11 Jagannadha... sf: Discover read dummy_byte
2014-01-11 Jagannadha... sf: Add QUAD_IO_FAST read support
2014-01-11 Jagannadha... sf: Separate the flash params table
2014-01-11 Jagannadha... sf: probe: Enable RD_FULL and WR_QPP
2014-01-11 Jagannadha... sf: Set quad enable bit support
2014-01-11 Jagannadha... sf: ops: Add configuration register writing support
2014-01-11 Jagannadha... sf: Add quad read/write commands support
2014-01-11 Jagannadha... sf: Add extended read commands support
2014-01-11 Axel Linspi: sh_spi: Use sh_spi_clear_bit() instead of open...
2014-01-11 Simon Glasssandbox: spi: Adjust 'sf test' to work on sandbox
2014-01-11 Kuo-Jung Suspi: Add Faraday SPI controller support
2014-01-10 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-10 Jagannadha... doc: Update the zynq u-boot status
2014-01-10 Jagannadha... zynq: Enable CONFIG_DEFAULT_DEVICE_TREE
2014-01-10 Jagannadha... dts: zynq: Add more zynq dts files
2014-01-10 Jagannadha... zynq-common: Enable verified boot(RSA)
2014-01-10 Jagannadha... gpio: zynq: Add dummy gpio routines
2014-01-10 Jagannadha... dts: zynq: Add basic fdt support
2014-01-10 Jagannadha... zynq-common: Define CONFIG_ENV_OVERWRITE
2014-01-10 Jagannadha... zynq-common: Define flash env. partition
2014-01-10 Jagannadha... zynq-common: Change Env. Sector size to 128Kb
2014-01-10 Jagannadha... zynq-common: Define default environment
2014-01-10 Jagannadha... zynq: Add support to find bootmode
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm012 board support
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm013 board support
2014-01-10 Jagannadha... zynq: Add zynq_zc770 xm010 board support
2014-01-10 Jagannadha... zynq: Add zynq microzed board support
2014-01-10 Jagannadha... zynq: zc70x: Add Catalyst 24WC08 EEPROM config support
2014-01-10 Jagannadha... zynq-common: Define exact TEXT_BASE
2014-01-10 Jagannadha... zynq: Move CONFIG_SYS_SDRAM_SIZE to pre-board configs
2014-01-10 Jagannadha... zynq: Add zynq zed board support
2014-01-10 Jagannadha... zynq: Add zynq zc70x board support
2014-01-10 Jagannadha... doc: zynq: Add information on zynq u-boot
2014-01-10 Jagannadha... zynq-common: Rename zynq with zynq-common
2014-01-10 Jagannadha... zynq: Add GEM0, GEM1 configs support
2014-01-10 Jagannadha... zynq: Add UART0, UART1 configs support
next