openwrt/staging/dangole.git
2015-12-04 Jo-Philipp... board.d: add support for gpio_switch sections
2015-12-04 Jo-Philipp... mcs814x: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... sunxi: fix board.d permissions
2015-12-04 Jo-Philipp... orion: convert initial network configuration to board.d
2015-12-04 Jo-Philipp... sunxi: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... ar7: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... ath25: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... lantiq: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... brcm63xx: switch from uci-defaults to board.d
2015-12-04 Jo-Philipp... all: remove redundant board.d/00_model files
2015-12-04 Jo-Philipp... base-files: board.d: auto-set model id and name if...
2015-12-04 Jonas Gorskikernel: drop bridge hack for removing ipv6 dependency
2015-12-04 Jo-Philipp... base-files: board.d: support dsl modems, atm bridges...
2015-12-04 Jonas Gorskikernel: mvswitch: merge 3.10+ compile fix into the...
2015-12-04 Rafał Miłeckikernel: drop unneeded modification of mtd_add_partition...
2015-12-04 Rafał Miłeckikernel: drop old uimage splitter from 4.4
2015-12-04 Jo-Philipp... malta: board.d: fix typo
2015-12-03 Jo-Philipp... kirkwood: add missing board_config_flush(), remove...
2015-12-03 Jo-Philipp... all: remove dummy ucidef_set_interface_loopback() from...
2015-12-03 Jo-Philipp... arc770: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... mxs: convert from uci-defaults to board.d
2015-12-03 Jo-Philipp... malta: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... at91: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... realview: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... imx6: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... netlogic: fix typo, copyright in board.d script
2015-12-03 Jo-Philipp... netlogic: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... kirkwood, ipq806x: fix board.d script permissions
2015-12-03 Jo-Philipp... octeon: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... kirkwood: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... base-files: board.d: support specifiying the protocol...
2015-12-03 Jo-Philipp... base-files: board.d: support timer leds
2015-12-03 Jo-Philipp... ipq806x: switch from uci-defaults to board.d
2015-12-03 Jo-Philipp... base-files: board.d: support ide leds
2015-12-03 Jo-Philipp... base-files: uci-defaults-new.sh: fix for handling multi...
2015-12-03 Hauke Mehrtensopenssl: update to version 1.0.2e
2015-12-03 Hauke Mehrtensmbedtls: update to version 2.1.3
2015-12-03 Hauke Mehrtenspolarssl: update to version 1.3.15
2015-12-03 Jo-Philipp... ar71xx: board.d: add missing include (#21296)
2015-12-03 Jo-Philipp... board.d: remove redundant ucidef_set_interfaces_lan_wan...
2015-12-03 Jo-Philipp... board.d: merge ucidef_add_switch() and ucidef_add_switc...
2015-12-03 Jo-Philipp... base-files: uci-defaults-new: remove reset/enable args...
2015-12-03 Jo-Philipp... base-files: uci-defaults-new, config_generate: refactor...
2015-12-03 Jo-Philipp... base-files: config_generate: add missing chunks of...
2015-12-03 Jo-Philipp... ramips: switch ucidef_add_switch_vlan() to ucidef_add_s...
2015-12-03 Felix Fietkaukernel: backport support for m25p80 compatible="jedec...
2015-12-03 Felix FietkauuClibc-ng: update to 1.0.9
2015-12-03 Felix Fietkaukernel: add overlayfs stacking fix from upstream
2015-12-03 Rafał Miłeckibcm53xx: move BCM5301X patches to use 08x prefix
2015-12-03 Jonas Gorskimac80211: put the !LINUX_4_4 dependency in the right...
2015-12-03 Rafał Miłeckibcm53xx: use backported versiions or R8000 & dt-binding...
2015-12-03 Rafał Miłeckibcm53xx: fix typo in BCM5310X (patch name and subject)
2015-12-03 Rafał Miłeckibcm53xx: move & update accepted USB patch for GPIO...
2015-12-03 Rafał Miłeckibcm53xx: use backported BCM5301X patches from stblinux...
2015-12-03 Rafał Miłeckibcm53xx: use backported BCM5301X patches from stblinux...
2015-12-03 Rafał Miłeckibcm53xx: set vcc-gpio properties in one patch
2015-12-03 Rafał Miłeckibcm53xx: drop fixed clock from DTS for Buffalo WXR...
2015-12-03 Rafał Miłeckibcm53xx: update linux 4.4 config
2015-12-03 Rafał Miłeckibcm53xx: add linux 4.4 support
2015-12-02 Jonas Gorskibrcm63xx: add linux 4.4 support
2015-12-02 Jonas Gorskikernel: add linux 4.4 support
2015-12-02 Jonas Gorskipackage: kernel: update dependencies for 4.4
2015-12-02 Jonas Gorskixtables-addons: update to 2.10
2015-12-02 Jonas Gorskikernel-version: drop 4.0 remnants
2015-12-02 Jonas Gorskibrcm63xx: Add NuCom R5010UNv2 support
2015-12-02 Jonas Gorskibrcm63xx: drop 3.18 support
2015-12-02 Jonas Gorskiipq806x: ap148/r7500: fix eth0 for non gige speeds
2015-12-02 Hauke Mehrtenskernel: update 4.1 to 4.1.13
2015-12-02 Hauke Mehrtensmac80211: install new firmware for ath9k-htc on target
2015-12-02 Jo-Philipp... bcm53xx: switch to ucidef_add_switch_ports()
2015-12-02 Felix Fietkaumpc85xx: fix up m25p80 device id (#21286)
2015-12-02 Felix Fietkaulantiq: fix up m25p80 device ids (#20975)
2015-12-02 Jo-Philipp... tools: make-ext4fs: explicitely request C collation...
2015-12-02 Hauke Mehrtensbcm53xx: update PCIe driver
2015-12-02 Hauke Mehrtensbcm53xx: update SMP patches
2015-12-02 Hauke Mehrtensbcm53xx: activate workarounds for erratas
2015-12-02 Hauke Mehrtensbcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgea...
2015-12-02 Felix Fietkaunetifd: update to the latest version, fixes an issue...
2015-12-02 Rafał Miłeckibrcm47xx: add Netgear WN2500RP support
2015-12-01 Jo-Philipp... mpc85xx: fix typo added in r47676
2015-11-30 Jo-Philipp... mpc85xx: record board id and model name in /etc/board...
2015-11-30 Jo-Philipp... base-files: uci-defaults-new, config_generate: allow...
2015-11-30 Imre Kalozmwlwifi: update to latest revision, fixes a kernel...
2015-11-30 Jo-Philipp... mpc85xx: convert to ucidef_add_switch_ports()
2015-11-30 Jo-Philipp... base-files: uci-defaults-new: only emit force_link...
2015-11-30 Jo-Philipp... mvebu: switch network and led config defaults to board...
2015-11-30 Jo-Philipp... base-files: uci-defaults-new: fix unquoted variables
2015-11-30 Jo-Philipp... ar71xx: record board id and model name in /etc/board...
2015-11-30 Jo-Philipp... base-files: uci-defaults-new: add board id and name...
2015-11-28 John Crispinramips: remove duplicate patch
2015-11-28 John Crispinprocd: update to latest git HEAD
2015-11-28 John Crispinmac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanc...
2015-11-28 John Crispinramips: adapt VoCore to new second spi device code
2015-11-28 John Crispinramips: add second SPI clocks
2015-11-26 Rafał Miłeckikernel: add fix for missing include in spi-nor.h (...
2015-11-26 Felix Fietkaukernel: revert a faulty upstream commit that was added...
2015-11-26 Jo-Philipp... ar71xx: switch network and led defaults to board detect...
2015-11-26 Imre Kalozmwlwifi: update to latest version
2015-11-26 Jo-Philipp... base-files: uci-defaults-new, config_generate: support...
2015-11-26 Jo-Philipp... base-files: config_generate: regroup led generator...
next