From a460965a670d06566e653ef7df3ed25c554a34a0 Mon Sep 17 00:00:00 2001 From: Othmar Truniger Date: Tue, 17 Feb 2015 23:14:27 +0100 Subject: [PATCH] apcupsd: move from old packages and Makefile updated Signed-off-by: Othmar Truniger --- net/apcupsd/Makefile | 78 +++++ net/apcupsd/files/apccontrol | 146 ++++++++ net/apcupsd/files/apcupsd.conf | 322 ++++++++++++++++++ net/apcupsd/files/apcupsd.init | 12 + net/apcupsd/files/apcupsd_mail.conf | 7 + net/apcupsd/files/changeme | 17 + net/apcupsd/files/commfailure | 17 + net/apcupsd/files/commok | 17 + net/apcupsd/files/offbattery | 17 + net/apcupsd/files/onbattery | 17 + .../patches/010-fix-include-paths.patch | 13 + 11 files changed, 663 insertions(+) create mode 100644 net/apcupsd/Makefile create mode 100644 net/apcupsd/files/apccontrol create mode 100644 net/apcupsd/files/apcupsd.conf create mode 100644 net/apcupsd/files/apcupsd.init create mode 100644 net/apcupsd/files/apcupsd_mail.conf create mode 100644 net/apcupsd/files/changeme create mode 100644 net/apcupsd/files/commfailure create mode 100644 net/apcupsd/files/commok create mode 100644 net/apcupsd/files/offbattery create mode 100644 net/apcupsd/files/onbattery create mode 100644 net/apcupsd/patches/010-fix-include-paths.patch diff --git a/net/apcupsd/Makefile b/net/apcupsd/Makefile new file mode 100644 index 0000000000..0d6e8c05fb --- /dev/null +++ b/net/apcupsd/Makefile @@ -0,0 +1,78 @@ +# +# Copyright (C) 2006-2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=apcupsd +PKG_VERSION:=3.14.13 +PKG_RELEASE:=2 + +PKG_MAINTAINER:=Othmar Truniger +PKG_LICENSE:=GPL-2.0 +PKG_LICENSE_FILES:=COPYING + +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz +PKG_SOURCE_URL:=@SF/apcupsd +PKG_MD5SUM:=c291d9d3923b4d9c0e600b755ad4f489 + +include $(INCLUDE_DIR)/package.mk + +define Package/apcupsd + SECTION:=utils + CATEGORY:=Utilities + DEPENDS:=+libpthread +libusb-compat + TITLE:=UPS control software + URL:=http://www.apcupsd.org/ +endef + +define Build/Configure + $(CP) $(SCRIPT_DIR)/config.* $(PKG_BUILD_DIR)/autoconf/ + $(call Build/Configure/Default, \ + --with-distname=unknown \ + --sysconfdir=/etc/apcupsd \ + --enable-usb \ + --without-x \ + ) +endef + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) \ + DESTDIR="$(PKG_INSTALL_DIR)" \ + LD="$(TARGET_CC)" \ + all install +endef + +define Package/apcupsd/install + $(INSTALL_DIR) $(1)/usr/sbin + $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/apcupsd $(1)/usr/sbin/ + $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/smtp $(1)/usr/sbin/ + $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/apctest $(1)/usr/sbin/ + $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/apcaccess $(1)/usr/sbin/ + $(INSTALL_DIR) $(1)/etc/apcupsd + $(INSTALL_CONF) ./files/apcupsd.conf $(1)/etc/apcupsd/ + $(INSTALL_CONF) ./files/apcupsd_mail.conf $(1)/etc/apcupsd/ + $(INSTALL_BIN) ./files/changeme $(1)/etc/apcupsd/ + $(INSTALL_BIN) ./files/commfailure $(1)/etc/apcupsd/ + $(INSTALL_BIN) ./files/commok $(1)/etc/apcupsd/ + $(INSTALL_BIN) ./files/offbattery $(1)/etc/apcupsd/ + $(INSTALL_BIN) ./files/onbattery $(1)/etc/apcupsd/ + $(INSTALL_BIN) ./files/apccontrol $(1)/etc/apcupsd/ + $(INSTALL_DIR) $(1)/etc/init.d + $(INSTALL_BIN) ./files/apcupsd.init $(1)/etc/init.d/apcupsd +endef + +define Package/apcupsd/conffiles +/etc/apcupsd/apcupsd.conf +/etc/apcupsd/apcupsd_mail.conf +/etc/apcupsd/changeme +/etc/apcupsd/commfailure +/etc/apcupsd/commok +/etc/apcupsd/offbattery +/etc/apcupsd/onbattery +endef + +$(eval $(call BuildPackage,apcupsd)) diff --git a/net/apcupsd/files/apccontrol b/net/apcupsd/files/apccontrol new file mode 100644 index 0000000000..254935418b --- /dev/null +++ b/net/apcupsd/files/apccontrol @@ -0,0 +1,146 @@ +#!/bin/sh +# +# Copyright (C) 1999-2002 Riccardo Facchetti +# +# for apcupsd release 3.14.1 (04 May 2007) - unknown +# +# platforms/apccontrol. Generated from apccontrol.in by configure. +# +# Note, this is a generic file that can be used by most +# systems. If a particular system needs to have something +# special, start with this file, and put a copy in the +# platform subdirectory. +# + +# +# These variables are needed for set up the autoconf other variables. +# +prefix=/usr +exec_prefix=/usr + +APCPID=/var/run/apcupsd.pid +APCUPSD=/usr/sbin/apcupsd +SHUTDOWN=/sbin/shutdown +SCRIPTSHELL=/bin/sh +SCRIPTDIR=/etc/apcupsd +WALL=true + +# +# Concatenate all output from this script to the events file +# Note, the following kills the script in a power fail situation +# where the disks are mounted read-only. +# exec >>/var/log/apcupsd.events 2>&1 + +# +# This piece is to substitute the default behaviour with your own script, +# perl, or C program. +# You can customize every single command creating an executable file (may be a +# script or a compiled program) and calling it the same as the $1 parameter +# passed by apcupsd to this script. +# +# After executing your script, apccontrol continues with the default action. +# If you do not want apccontrol to continue, exit your script with exit +# code 99. E.g. "exit 99". +# +# WARNING: the apccontrol file will be overwritten every time you update your +# apcupsd, doing `make install'. Your own customized scripts will _not_ be +# overwritten. If you wish to make changes to this file (discouraged), you +# should change apccontrol.sh.in and then rerun the configure process. +# +if [ -f ${SCRIPTDIR}/${1} -a -x ${SCRIPTDIR}/${1} ] +then + ${SCRIPTDIR}/${1} ${2} ${3} ${4} + # exit code 99 means he does not want us to do default action + if [ $? = 99 ] ; then + exit 0 + fi +fi + +case "$1" in + killpower) + echo "Apccontrol doing: ${APCUPSD} --killpower on UPS ${2}" + sleep 10 + ${APCUPSD} --killpower + echo "Apccontrol has done: ${APCUPSD} --killpower on UPS ${2}" | ${WALL} + ;; + commfailure) + echo "Warning communications lost with UPS ${2}" | ${WALL} + ;; + commok) + echo "Communications restored with UPS ${2}" | ${WALL} + ;; +# +# powerout, onbattery, offbattery, mainsback events occur +# in that order. +# + powerout) + echo "Warning power loss detected on UPS ${2}" | ${WALL} + ;; + onbattery) + echo "Power failure on UPS ${2}. Running on batteries." | ${WALL} + ;; + offbattery) + ;; + mainsback) + echo "Power has returned on UPS ${2}..." | ${WALL} + if [ -f /etc/powerfail ] ; then + printf "Continuing with shutdown." | ${WALL} + fi + ;; + failing) + echo "Battery power exhaused on UPS ${2}. Doing shutdown." | ${WALL} + ;; + timeout) + echo "Battery time limit exceeded on UPS ${2}. Doing shutdown." | ${WALL} + ;; + loadlimit) + echo "Remaining battery charge below limit on UPS ${2}. Doing shutdown." | ${WALL} + ;; + runlimit) + echo "Remaining battery runtime below limit on UPS ${2}. Doing shutdown." | ${WALL} + ;; + doreboot) + echo "UPS ${2} initiating Reboot Sequence" | ${WALL} + ${SHUTDOWN} -r now "apcupsd UPS ${2} initiated reboot" + ;; + doshutdown) + echo "UPS ${2} initiated Shutdown Sequence" | ${WALL} + ${SHUTDOWN} -h now "apcupsd UPS ${2} initiated shutdown" + ;; + annoyme) + echo "Power problems with UPS ${2}. Please logoff." | ${WALL} + ;; + emergency) + echo "Emergency Shutdown. Possible battery failure on UPS ${2}." | ${WALL} + ;; + changeme) + echo "Emergency! Batteries have failed on UPS ${2}. Change them NOW" | ${WALL} + ;; + remotedown) + echo "Remote Shutdown. Beginning Shutdown Sequence." | ${WALL} + ;; + restartme) + echo -n "Restarting APCUPSD Power Management: " + THEPID=`cat ${APCPID}` + kill ${THEPID} + rm -f ${APCPID} + rm -f /etc/powerfail + rm -f /etc/nologin + sleep 5 + `${APCUPSD}` + echo "apcupsd" + ;; + startselftest) + ;; + endselftest) + ;; + battdetach) + ;; + battattach) + ;; + *) echo "Usage: ${0##*/} command" + echo " warning: this script is intended to be launched by" + echo " apcupsd and should never be launched by users." + exit 1 + ;; +esac diff --git a/net/apcupsd/files/apcupsd.conf b/net/apcupsd/files/apcupsd.conf new file mode 100644 index 0000000000..b9acd61d6b --- /dev/null +++ b/net/apcupsd/files/apcupsd.conf @@ -0,0 +1,322 @@ +## apcupsd.conf v1.1 ## +# +# for apcupsd release 3.14.1 (04 May 2007) - unknown +# +# "apcupsd" POSIX config file + +# +# ========= General configuration parameters ============ +# + +# UPSNAME xxx +# Use this to give your UPS a name in log files and such. This +# is particulary useful if you have multiple UPSes. This does not +# set the EEPROM. It should be 8 characters or less. +UPSNAME ups1 + +# UPSCABLE +# Defines the type of cable connecting the UPS to your computer. +# +# Possible generic choices for are: +# simple, smart, ether, usb +# +# Or a specific cable model number may be used: +# 940-0119A, 940-0127A, 940-0128A, 940-0020B, +# 940-0020C, 940-0023A, 940-0024B, 940-0024C, +# 940-1524C, 940-0024G, 940-0095A, 940-0095B, +# 940-0095C, M-04-02-2000 +# +UPSCABLE smart + +# To get apcupsd to work, in addition to defining the cable +# above, you must also define a UPSTYPE, which corresponds to +# the type of UPS you have (see the Description for more details). +# You must also specify a DEVICE, sometimes referred to as a port. +# For USB UPSes, please leave the DEVICE directive blank. For +# other UPS types, you must specify an appropriate port or address. +# +# UPSTYPE DEVICE Description +# apcsmart /dev/tty** Newer serial character device, +# appropriate for SmartUPS models using +# a serial cable (not USB). +# +# usb Most new UPSes are USB. A blank DEVICE +# setting enables autodetection, which is +# the best choice for most installations. +# +# net hostname:port Network link to a master apcupsd +# through apcupsd's Network Information +# Server. This is used if you don't have +# a UPS directly connected to your computer. +# +# snmp hostname:port:vendor:community +# SNMP Network link to an SNMP-enabled +# UPS device. Vendor is the MIB used by +# the UPS device: can be "APC", "APC_NOTRAP" +# or "RFC" where APC is the powernet MIB, +# "APC_NOTRAP" is powernet with SNMP trap +# catching disabled, and RFC is the IETF's +# rfc1628 UPS-MIB. You usually want "APC". +# Port is usually 161. Community is usually +# "private". +# +# dumb /dev/tty** Old serial character device for use +# with simple-signaling UPSes. +# +# pcnet ipaddr:username:passphrase +# PowerChute Network Shutdown protocol +# which can be used as an alternative to SNMP +# with AP9617 family of smart slot cards. +# ipaddr is the IP address of the UPS mgmt +# card. username and passphrase are the +# credentials for which the card has been +# configured. +# +UPSTYPE apcsmart +DEVICE /dev/ttyS0 + + +# LOCKFILE +# Path for device lock file. Not used on Win32. +LOCKFILE /var/lock + +# SCRIPTDIR +# Directory in which apccontrol and event scripts are located. +SCRIPTDIR /etc/apcupsd + +# PWRFAILDIR +# Directory in which to write the powerfail flag file. This file +# is created when apcupsd initiates a system shutdown and is +# checked in the OS halt scripts to determine if a killpower +# (turning off UPS output power) is required. +PWRFAILDIR /etc + +# NOLOGINDIR +# Directory in which to write the nologin file. The existence +# of this flag file tells the OS to disallow new logins. +NOLOGINDIR /etc + + +# +# ======== Configuration parameters used during power failures ========== +# + +# The ONBATTERYDELAY is the time in seconds from when a power failure +# is detected until we react to it with an onbattery event. +# +# This means that, apccontrol will be called with the powerout argument +# immediately when a power failure is detected. However, the +# onbattery argument is passed to apccontrol only after the +# ONBATTERYDELAY time. If you don't want to be annoyed by short +# powerfailures, make sure that apccontrol powerout does nothing +# i.e. comment out the wall. +#ONBATTERYDELAY 6 + +# +# Note: BATTERYLEVEL, MINUTES, and TIMEOUT work in conjunction, so +# the first that occurs will cause the initation of a shutdown. +# + +# If during a power failure, the remaining battery percentage +# (as reported by the UPS) is below or equal to BATTERYLEVEL, +# apcupsd will initiate a system shutdown. +BATTERYLEVEL 5 + +# If during a power failure, the remaining runtime in minutes +# (as calculated internally by the UPS) is below or equal to MINUTES, +# apcupsd, will initiate a system shutdown. +MINUTES 3 + +# If during a power failure, the UPS has run on batteries for TIMEOUT +# many seconds or longer, apcupsd will initiate a system shutdown. +# A value of 0 disables this timer. +# +# Note, if you have a Smart UPS, you will most likely want to disable +# this timer by setting it to zero. That way, you UPS will continue +# on batteries until either the % charge remaing drops to or below BATTERYLEVEL, +# or the remaining battery runtime drops to or below MINUTES. Of course, +# if you are testing, setting this to 60 causes a quick system shutdown +# if you pull the power plug. +# If you have an older dumb UPS, you will want to set this to less than +# the time you know you can run on batteries. +TIMEOUT 0 + +# Time in seconds between annoying users to signoff prior to +# system shutdown. 0 disables. +ANNOY 300 + +# Initial delay after power failure before warning users to get +# off the system. +ANNOYDELAY 60 + +# The condition which determines when users are prevented from +# logging in during a power failure. +# NOLOGON [ disable | timeout | percent | minutes | always ] +NOLOGON disable + +# If KILLDELAY is non-zero, apcupsd will continue running after a +# shutdown has been requested, and after the specified time in +# seconds attempt to kill the power. This is for use on systems +# where apcupsd cannot regain control after a shutdown. +# KILLDELAY 0 disables +KILLDELAY 0 + +# +# ==== Configuration statements for Network Information Server ==== +# + +# NETSERVER [ on | off ] on enables, off disables the network +# information server. If netstatus is on, a network information +# server process will be started for serving the STATUS and +# EVENT data over the network (used by CGI programs). +NETSERVER on + +# NISIP +# IP address on which NIS server will listen for incoming connections. +# This is useful if your server is multi-homed (has more than one +# network interface and IP address). Default value is 0.0.0.0 which +# means any incoming request will be serviced. Alternatively, you can +# configure this setting to any specific IP address of your server and +# NIS will listen for connections only on that interface. Use the +# loopback address (127.0.0.1) to accept connections only from the +# local machine. +NISIP 0.0.0.0 + +# NISPORT default is 3551 as registered with the IANA +# port to use for sending STATUS and EVENTS data over the network. +# It is not used unless NETSERVER is on. If you change this port, +# you will need to change the corresponding value in the cgi directory +# and rebuild the cgi programs. +NISPORT 3551 + +# If you want the last few EVENTS to be available over the network +# by the network information server, you must define an EVENTSFILE. +EVENTSFILE /var/log/apcupsd.events + +# EVENTSFILEMAX +# By default, the size of the EVENTSFILE will be not be allowed to exceed +# 10 kilobytes. When the file grows beyond this limit, older EVENTS will +# be removed from the beginning of the file (first in first out). The +# parameter EVENTSFILEMAX can be set to a different kilobyte value, or set +# to zero to allow the EVENTSFILE to grow without limit. +EVENTSFILEMAX 10 + +# +# ========== Configuration statements used if sharing ============= +# a UPS with more than one machine + +# NETTIME +# Interval (in seconds) at which the NIS client polls the server. +# Used only when this apcupsd is a network client (UPSTYPE net). +#NETTIME 60 + +# +# Remaining items are for ShareUPS (APC expansion card) ONLY +# + +# UPSCLASS [ standalone | shareslave | sharemaster ] +# Normally standalone unless you share an UPS using an APC ShareUPS +# card. +UPSCLASS standalone + +# UPSMODE [ disable | share ] +# Normally disable unless you share an UPS using an APC ShareUPS card. +UPSMODE disable + +# +# ===== Configuration statements to control apcupsd system logging ======== +# + +# Time interval in seconds between writing the STATUS file; 0 disables +STATTIME 0 + +# Location of STATUS file (written to only if STATTIME is non-zero) +STATFILE /var/log/apcupsd.status + +# LOGSTATS [ on | off ] on enables, off disables +# Note! This generates a lot of output, so if +# you turn this on, be sure that the +# file defined in syslog.conf for LOG_NOTICE is a named pipe. +# You probably do not want this on. +LOGSTATS off + +# Time interval in seconds between writing the DATA records to +# the log file. 0 disables. +DATATIME 0 + +# FACILITY defines the logging facility (class) for logging to syslog. +# If not specified, it defaults to "daemon". This is useful +# if you want to separate the data logged by apcupsd from other +# programs. +#FACILITY DAEMON + +# +# ========== Configuration statements used in updating the UPS EPROM ========= +# + +# +# These statements are used only by apctest when choosing "Set EEPROM with conf +# file values" from the EEPROM menu. THESE STATEMENTS HAVE NO EFFECT ON APCUPSD. +# + +# UPS name, max 8 characters +#UPSNAME UPS_IDEN + +# Battery date - 8 characters +#BATTDATE mm/dd/yy + +# Sensitivity to line voltage quality (H cause faster transfer to batteries) +# SENSITIVITY H M L (default = H) +#SENSITIVITY H + +# UPS delay after power return (seconds) +# WAKEUP 000 060 180 300 (default = 0) +#WAKEUP 60 + +# UPS Grace period after request to power off (seconds) +# SLEEP 020 180 300 600 (default = 20) +#SLEEP 180 + +# Low line voltage causing transfer to batteries +# The permitted values depend on your model as defined by last letter +# of FIRMWARE or APCMODEL. Some representative values are: +# D 106 103 100 097 +# M 177 172 168 182 +# A 092 090 088 086 +# I 208 204 200 196 (default = 0 => not valid) +#LOTRANSFER 208 + +# High line voltage causing transfer to batteries +# The permitted values depend on your model as defined by last letter +# of FIRMWARE or APCMODEL. Some representative values are: +# D 127 130 133 136 +# M 229 234 239 224 +# A 108 110 112 114 +# I 253 257 261 265 (default = 0 => not valid) +#HITRANSFER 253 + +# Battery charge needed to restore power +# RETURNCHARGE 00 15 50 90 (default = 15) +#RETURNCHARGE 15 + +# Alarm delay +# 0 = zero delay after pwr fail, T = power fail + 30 sec, L = low battery, N = never +# BEEPSTATE 0 T L N (default = 0) +#BEEPSTATE T + +# Low battery warning delay in minutes +# LOWBATT 02 05 07 10 (default = 02) +#LOWBATT 2 + +# UPS Output voltage when running on batteries +# The permitted values depend on your model as defined by last letter +# of FIRMWARE or APCMODEL. Some representative values are: +# D 115 +# M 208 +# A 100 +# I 230 240 220 225 (default = 0 => not valid) +#OUTPUTVOLTS 230 + +# Self test interval in hours 336=2 weeks, 168=1 week, ON=at power on +# SELFTEST 336 168 ON OFF (default = 336) +#SELFTEST 336 diff --git a/net/apcupsd/files/apcupsd.init b/net/apcupsd/files/apcupsd.init new file mode 100644 index 0000000000..5454377961 --- /dev/null +++ b/net/apcupsd/files/apcupsd.init @@ -0,0 +1,12 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2006 OpenWrt.org +START=50 +STOP=50 + +start() { + /usr/sbin/apcupsd -f /etc/apcupsd/apcupsd.conf +} + +stop() { + kill $(cat /var/run/apcupsd.pid) +} diff --git a/net/apcupsd/files/apcupsd_mail.conf b/net/apcupsd/files/apcupsd_mail.conf new file mode 100644 index 0000000000..3ada8e52d5 --- /dev/null +++ b/net/apcupsd/files/apcupsd_mail.conf @@ -0,0 +1,7 @@ +#!/bin/sh + +MAILPROG="/usr/sbin/smtp" +MAILHOST="mail:25" +FROM="OpenWrt" +TO="apcups@example.com" +HOSTNAME="OpenWrt" diff --git a/net/apcupsd/files/changeme b/net/apcupsd/files/changeme new file mode 100644 index 0000000000..bcf448aba3 --- /dev/null +++ b/net/apcupsd/files/changeme @@ -0,0 +1,17 @@ +#!/bin/sh +# +# This shell script if placed in /etc/apcupsd +# will be called by /etc/apcupsd/apccontrol when apcupsd +# detects that the battery should be replaced. +# We send an email message to root to notify him. +# +. /etc/apcupsd/apcupsd_mail.conf + +MSG="$HOSTNAME UPS battery needs changing NOW." +# +( + echo "$MSG" + echo " " + /usr/sbin/apcaccess status +) | $MAILPROG -h $MAILHOST -f $FROM -s "$MSG" $TO +exit 0 diff --git a/net/apcupsd/files/commfailure b/net/apcupsd/files/commfailure new file mode 100644 index 0000000000..b899195f67 --- /dev/null +++ b/net/apcupsd/files/commfailure @@ -0,0 +1,17 @@ +#!/bin/sh +# +# This shell script if placed in /etc/apcupsd +# will be called by /etc/apcupsd/apccontrol when apcupsd +# loses contact with the UPS (i.e. the serial connection is not responding). +# We send an email message to root to notify him. +# +. /etc/apcupsd/apcupsd_mail.conf + +MSG="$HOSTNAME Communications with UPS lost" +# +( + echo "$MSG" + echo " " + /usr/sbin/apcaccess status +) | $MAILPROG -h $MAILHOST -f $FROM -s "$MSG" $TO +exit 0 diff --git a/net/apcupsd/files/commok b/net/apcupsd/files/commok new file mode 100644 index 0000000000..cd5d1c62c3 --- /dev/null +++ b/net/apcupsd/files/commok @@ -0,0 +1,17 @@ +#!/bin/sh +# +# This shell script if placed in /etc/apcupsd +# will be called by /etc/apcupsd/apccontrol when apcupsd +# restores contact with the UPS (i.e. the serial connection is restored). +# We send an email message to root to notify him. +# +. /etc/apcupsd/apcupsd_mail.conf + +MSG="$HOSTNAME Communications with UPS restored" +# +( + echo "$MSG" + echo " " + /usr/sbin/apcaccess status +) | $MAILPROG -h $MAILHOST -f $FROM -s "$MSG" $TO +exit 0 diff --git a/net/apcupsd/files/offbattery b/net/apcupsd/files/offbattery new file mode 100644 index 0000000000..cd5d1c62c3 --- /dev/null +++ b/net/apcupsd/files/offbattery @@ -0,0 +1,17 @@ +#!/bin/sh +# +# This shell script if placed in /etc/apcupsd +# will be called by /etc/apcupsd/apccontrol when apcupsd +# restores contact with the UPS (i.e. the serial connection is restored). +# We send an email message to root to notify him. +# +. /etc/apcupsd/apcupsd_mail.conf + +MSG="$HOSTNAME Communications with UPS restored" +# +( + echo "$MSG" + echo " " + /usr/sbin/apcaccess status +) | $MAILPROG -h $MAILHOST -f $FROM -s "$MSG" $TO +exit 0 diff --git a/net/apcupsd/files/onbattery b/net/apcupsd/files/onbattery new file mode 100644 index 0000000000..ee5f65302a --- /dev/null +++ b/net/apcupsd/files/onbattery @@ -0,0 +1,17 @@ +#!/bin/sh +# +# This shell script if placed in /etc/apcupsd +# will be called by /etc/apcupsd/apccontrol when the UPS +# goes on batteries. +# We send an email message to root to notify him. +# +. /etc/apcupsd/apcupsd_mail.conf + +MSG="$HOSTNAME Power Failure !!!" +# +( + echo "$MSG" + echo " " + /usr/sbin/apcaccess status +) | $MAILPROG -h $MAILHOST -f $FROM -s "$MSG" $TO +exit 0 diff --git a/net/apcupsd/patches/010-fix-include-paths.patch b/net/apcupsd/patches/010-fix-include-paths.patch new file mode 100644 index 0000000000..21515441fb --- /dev/null +++ b/net/apcupsd/patches/010-fix-include-paths.patch @@ -0,0 +1,13 @@ +diff --git a/autoconf/variables.mak.in b/autoconf/variables.mak.in +index b67e467..6022434 100644 +--- a/autoconf/variables.mak.in ++++ b/autoconf/variables.mak.in +@@ -65,7 +65,7 @@ DRVLIBS = @PTHREAD_LFLAGS@ @DRVLIBS@ + X_LIBS = @X_LIBS@ + X_EXTRA_LIBS = @X_EXTRA_LIBS@ + +-CPPFLAGS = @CPPFLAGS@ -I$(topdir)/include $(EXTRAINCS) ++CPPFLAGS = -I$(topdir)/include @CPPFLAGS@ $(EXTRAINCS) + CFLAGS = $(CPPFLAGS) @CFLAGS@ @PTHREAD_CFLAGS@ + CXXFLAGS = $(CPPFLAGS) @CXXFLAGS@ @PTHREAD_CFLAGS@ + LDFLAGS = @LDFLAGS@ -- 2.30.2