From ffdd073681589d76055a4c8cc8adb187b1f599bf Mon Sep 17 00:00:00 2001 From: Kieran Bingham Date: Tue, 13 Feb 2018 17:48:54 +0000 Subject: [PATCH] dt-bindings: adv7511: Extend bindings to allow specifying slave map addresses The ADV7511 has four 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. Extend the device tree node bindings to be able to override the default addresses so that address conflicts with other devices on the same bus may be resolved at the board description level. Signed-off-by: Kieran Bingham Reviewed-by: Rob Herring Reviewed-by: Laurent Pinchart Signed-off-by: Archit Taneja Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-3-git-send-email-kbingham@kernel.org --- .../bindings/display/bridge/adi,adv7511.txt | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 0047b1394c70..2c887536258c 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -14,7 +14,13 @@ Required properties: "adi,adv7513" "adi,adv7533" -- reg: I2C slave address +- reg: I2C slave addresses + The ADV7511 internal registers are split into four pages exposed through + different I2C addresses, creating four register maps. Each map has it own + I2C address and acts as a standard slave device on the I2C bus. The main + address is mandatory, others are optional and revert to defaults if not + specified. + The ADV7511 supports a large number of input data formats that differ by their color depth, color format, clock mode, bit justification and random @@ -70,6 +76,9 @@ Optional properties: rather than generate its own timings for HDMI output. - clocks: from common clock binding: reference to the CEC clock. - clock-names: from common clock binding: must be "cec". +- reg-names : Names of maps with programmable addresses. + It can contain any map needing a non-default address. + Possible maps names are : "main", "edid", "cec", "packet" Required nodes: @@ -88,7 +97,12 @@ Example adv7511w: hdmi@39 { compatible = "adi,adv7511w"; - reg = <39>; + /* + * The EDID page will be accessible on address 0x66 on the I2C + * bus. All other maps continue to use their default addresses. + */ + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; clocks = <&cec_clock>; -- 2.30.2