From ffb7bf7672ddf531497d1a81b7e969e43484ea0f Mon Sep 17 00:00:00 2001 From: "Vittorio Gambaletta (VittGam)" Date: Wed, 4 May 2016 21:21:41 +0200 Subject: [PATCH] ramips: Fix network for routers without VLANs on eth0. Some routers only have one port, so eth0 is used without VLANs for them. Revision r47720 introduced some changes, but wrongly confused "enable" with "reset". VLANs need to be disabled for those routers, and the switch may be reset. Fix this, by explicitly disabling VLANs instead of resetting the switch for these routers. Also merge duplicate configuration for the "m2m". Signed-off-by: Vittorio Gambaletta --- target/linux/ramips/base-files/etc/board.d/02_network | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index ee690f6375..c54d46c2db 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -44,13 +44,14 @@ ramips_setup_interfaces() ht-tm02|\ linkits7688 | \ linkits7688d | \ + m2m|\ microwrt|\ ncs601w|\ w150m|\ wnce2001|\ zte-q7) ucidef_add_switch "switch0" - ucidef_add_switch_attr "switch0" "reset" "false" + ucidef_add_switch_attr "switch0" "enable" "false" ucidef_set_interface_lan "eth0" ;; 3g-6200nl|\ @@ -181,11 +182,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0" ;; - m2m) - ucidef_add_switch "switch0" - ucidef_add_switch_attr "switch0" "reset" "false" - ucidef_set_interface_lan "eth0" - ;; mlwg2|\ wizard8800|\ wl-330n|\ -- 2.30.2