From ff6e31d3a108ea2f9448597f29c1c3bde48a057b Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Sat, 27 Jun 2015 00:51:29 +0530 Subject: [PATCH] spi: davinci_spi: Driver cleanup Arrange driver code in more readable format[1] for easy accessing and readable. [1] http://patchwork.ozlabs.org/patch/265683/ Signed-off-by: Jagan Teki Cc: Rex Chang Cc: Murali Karicheri --- drivers/spi/davinci_spi.c | 343 +++++++++++++++++++------------------- 1 file changed, 173 insertions(+), 170 deletions(-) diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index e0ecf995ce..0a036ccb00 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -8,39 +8,13 @@ * * SPDX-License-Identifier: GPL-2.0+ */ + #include #include #include #include #include -struct davinci_spi_regs { - dv_reg gcr0; /* 0x00 */ - dv_reg gcr1; /* 0x04 */ - dv_reg int0; /* 0x08 */ - dv_reg lvl; /* 0x0c */ - dv_reg flg; /* 0x10 */ - dv_reg pc0; /* 0x14 */ - dv_reg pc1; /* 0x18 */ - dv_reg pc2; /* 0x1c */ - dv_reg pc3; /* 0x20 */ - dv_reg pc4; /* 0x24 */ - dv_reg pc5; /* 0x28 */ - dv_reg rsvd[3]; - dv_reg dat0; /* 0x38 */ - dv_reg dat1; /* 0x3c */ - dv_reg buf; /* 0x40 */ - dv_reg emu; /* 0x44 */ - dv_reg delay; /* 0x48 */ - dv_reg def; /* 0x4c */ - dv_reg fmt0; /* 0x50 */ - dv_reg fmt1; /* 0x54 */ - dv_reg fmt2; /* 0x58 */ - dv_reg fmt3; /* 0x5c */ - dv_reg intvec0; /* 0x60 */ - dv_reg intvec1; /* 0x64 */ -}; - #define BIT(x) (1 << (x)) /* SPIGCR0 */ @@ -112,6 +86,35 @@ struct davinci_spi_regs { #define SPI2_BASE CONFIG_SYS_SPI2_BASE #endif +/* davinci spi register set */ +struct davinci_spi_regs { + dv_reg gcr0; /* 0x00 */ + dv_reg gcr1; /* 0x04 */ + dv_reg int0; /* 0x08 */ + dv_reg lvl; /* 0x0c */ + dv_reg flg; /* 0x10 */ + dv_reg pc0; /* 0x14 */ + dv_reg pc1; /* 0x18 */ + dv_reg pc2; /* 0x1c */ + dv_reg pc3; /* 0x20 */ + dv_reg pc4; /* 0x24 */ + dv_reg pc5; /* 0x28 */ + dv_reg rsvd[3]; + dv_reg dat0; /* 0x38 */ + dv_reg dat1; /* 0x3c */ + dv_reg buf; /* 0x40 */ + dv_reg emu; /* 0x44 */ + dv_reg delay; /* 0x48 */ + dv_reg def; /* 0x4c */ + dv_reg fmt0; /* 0x50 */ + dv_reg fmt1; /* 0x54 */ + dv_reg fmt2; /* 0x58 */ + dv_reg fmt3; /* 0x5c */ + dv_reg intvec0; /* 0x60 */ + dv_reg intvec1; /* 0x64 */ +}; + +/* davinci spi slave */ struct davinci_spi_slave { struct spi_slave slave; struct davinci_spi_regs *regs; @@ -123,111 +126,6 @@ static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave) return container_of(slave, struct davinci_spi_slave, slave); } -void spi_init() -{ - /* do nothing */ -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct davinci_spi_slave *ds; - - if (!spi_cs_is_valid(bus, cs)) - return NULL; - - ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs); - if (!ds) - return NULL; - - switch (bus) { - case SPI0_BUS: - ds->regs = (struct davinci_spi_regs *)SPI0_BASE; - break; -#ifdef CONFIG_SYS_SPI1 - case SPI1_BUS: - ds->regs = (struct davinci_spi_regs *)SPI1_BASE; - break; -#endif -#ifdef CONFIG_SYS_SPI2 - case SPI2_BUS: - ds->regs = (struct davinci_spi_regs *)SPI2_BASE; - break; -#endif - default: /* Invalid bus number */ - return NULL; - } - - ds->freq = max_hz; - - return &ds->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - free(ds); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - unsigned int scalar; - - /* Enable the SPI hardware */ - writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); - udelay(1000); - writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0); - - /* Set master mode, powered up and not activated */ - writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1); - - /* CS, CLK, SIMO and SOMI are functional pins */ - writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK | - SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); - - /* setup format */ - scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; - - /* - * Use following format: - * character length = 8, - * clock signal delayed by half clk cycle, - * clock low in idle state - Mode 0, - * MSB shifted out first - */ - writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) | - (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0); - - /* - * Including a minor delay. No science here. Should be good even with - * no delay - */ - writel((50 << SPI_C2TDELAY_SHIFT) | - (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay); - - /* default chip select register */ - writel(SPIDEF_CSDEF0_MASK, &ds->regs->def); - - /* no interrupts */ - writel(0, &ds->regs->int0); - writel(0, &ds->regs->lvl); - - /* enable SPI */ - writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); - - return 0; -} - -void spi_release_bus(struct spi_slave *slave) -{ - struct davinci_spi_slave *ds = to_davinci_spi(slave); - - /* Disable the SPI hardware */ - writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); -} - /* * This functions needs to act like a macro to avoid pipeline reloads in the * loops below. Use always_inline. This gains us about 160KiB/s and the bloat @@ -343,6 +241,149 @@ static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len, } #endif +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + int ret = 0; + + switch (bus) { + case SPI0_BUS: + if (cs < SPI0_NUM_CS) + ret = 1; + break; +#ifdef CONFIG_SYS_SPI1 + case SPI1_BUS: + if (cs < SPI1_NUM_CS) + ret = 1; + break; +#endif +#ifdef CONFIG_SYS_SPI2 + case SPI2_BUS: + if (cs < SPI2_NUM_CS) + ret = 1; + break; +#endif + default: + /* Invalid bus number. Do nothing */ + break; + } + return ret; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + /* do nothing */ +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + /* do nothing */ +} + +void spi_init(void) +{ + /* do nothing */ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct davinci_spi_slave *ds; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + ds = spi_alloc_slave(struct davinci_spi_slave, bus, cs); + if (!ds) + return NULL; + + switch (bus) { + case SPI0_BUS: + ds->regs = (struct davinci_spi_regs *)SPI0_BASE; + break; +#ifdef CONFIG_SYS_SPI1 + case SPI1_BUS: + ds->regs = (struct davinci_spi_regs *)SPI1_BASE; + break; +#endif +#ifdef CONFIG_SYS_SPI2 + case SPI2_BUS: + ds->regs = (struct davinci_spi_regs *)SPI2_BASE; + break; +#endif + default: /* Invalid bus number */ + return NULL; + } + + ds->freq = max_hz; + + return &ds->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + + free(ds); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + unsigned int scalar; + + /* Enable the SPI hardware */ + writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); + udelay(1000); + writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0); + + /* Set master mode, powered up and not activated */ + writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1); + + /* CS, CLK, SIMO and SOMI are functional pins */ + writel(((1 << slave->cs) | SPIPC0_CLKFUN_MASK | + SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); + + /* setup format */ + scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; + + /* + * Use following format: + * character length = 8, + * clock signal delayed by half clk cycle, + * clock low in idle state - Mode 0, + * MSB shifted out first + */ + writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) | + (1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0); + + /* + * Including a minor delay. No science here. Should be good even with + * no delay + */ + writel((50 << SPI_C2TDELAY_SHIFT) | + (50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay); + + /* default chip select register */ + writel(SPIDEF_CSDEF0_MASK, &ds->regs->def); + + /* no interrupts */ + writel(0, &ds->regs->int0); + writel(0, &ds->regs->lvl); + + /* enable SPI */ + writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct davinci_spi_slave *ds = to_davinci_spi(slave); + + /* Disable the SPI hardware */ + writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0); +} + int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { @@ -386,41 +427,3 @@ out: } return 0; } - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - int ret = 0; - - switch (bus) { - case SPI0_BUS: - if (cs < SPI0_NUM_CS) - ret = 1; - break; -#ifdef CONFIG_SYS_SPI1 - case SPI1_BUS: - if (cs < SPI1_NUM_CS) - ret = 1; - break; -#endif -#ifdef CONFIG_SYS_SPI2 - case SPI2_BUS: - if (cs < SPI2_NUM_CS) - ret = 1; - break; -#endif - default: - /* Invalid bus number. Do nothing */ - break; - } - return ret; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* do nothing */ -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* do nothing */ -} -- 2.30.2