From ff3e077bd23c37c83d01aad105e528194e33d75e Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 5 Mar 2015 12:25:25 -0700 Subject: [PATCH] dm: pci: Add a uclass for PCI Add a uclass for PCI controllers and a generic one for PCI devices. Adjust the 'pci' command and the existing PCI support to work with this new uclass. Keep most of the compatibility code in a separate file so that it can be removed one day. TODO: Add more header file comments to the new parts of pci.h Signed-off-by: Simon Glass --- common/board_r.c | 2 + common/cmd_pci.c | 14 +- doc/driver-model/pci-info.txt | 70 ++++ drivers/pci/Kconfig | 12 + drivers/pci/Makefile | 8 +- drivers/pci/pci-uclass.c | 639 ++++++++++++++++++++++++++++++++++ drivers/pci/pci_auto.c | 16 +- drivers/pci/pci_compat.c | 43 +++ include/dm/uclass-id.h | 2 + include/pci.h | 289 ++++++++++++++- 10 files changed, 1081 insertions(+), 14 deletions(-) create mode 100644 doc/driver-model/pci-info.txt create mode 100644 drivers/pci/pci-uclass.c create mode 100644 drivers/pci/pci_compat.c diff --git a/common/board_r.c b/common/board_r.c index 0335f6bde6..af01e1cb99 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -230,7 +230,9 @@ static int initr_unlock_ram_in_cache(void) #ifdef CONFIG_PCI static int initr_pci(void) { +#ifndef CONFIG_DM_PCI pci_init(); +#endif return 0; } diff --git a/common/cmd_pci.c b/common/cmd_pci.c index e3a77e3582..dcecef8da8 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -48,6 +48,7 @@ void pciinfo(int BusNum, int ShortPCIListing) unsigned char HeaderType; unsigned short VendorID; pci_dev_t dev; + int ret; if (!hose) return; @@ -74,7 +75,10 @@ void pciinfo(int BusNum, int ShortPCIListing) if (pci_skip_dev(hose, dev)) continue; - pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID); + ret = pci_read_config_word(dev, PCI_VENDOR_ID, + &VendorID); + if (ret) + goto error; if ((VendorID == 0xFFFF) || (VendorID == 0x0000)) continue; @@ -91,8 +95,12 @@ void pciinfo(int BusNum, int ShortPCIListing) BusNum, Device, Function); pci_header_show(dev); } - } - } + } + } + + return; +error: + printf("Cannot read bus configuration: %d\n", ret); } diff --git a/doc/driver-model/pci-info.txt b/doc/driver-model/pci-info.txt new file mode 100644 index 0000000000..63efcb7b92 --- /dev/null +++ b/doc/driver-model/pci-info.txt @@ -0,0 +1,70 @@ +PCI with Driver Model +===================== + +How busses are scanned +---------------------- + +Any config read will end up at pci_read_config(). This uses +uclass_get_device_by_seq() to get the PCI bus for a particular bus number. +Bus number 0 will need to be requested first, and the alias in the device +tree file will point to the correct device: + + + aliases { + pci0 = &pci; + }; + + pci: pci-controller { + compatible = "sandbox,pci"; + ... + }; + + +If there is no alias the devices will be numbered sequentially in the device +tree. + +The call to uclass_get_device by seq() will cause the PCI bus to be probed. +This does a scan of the bus to locate available devices. These devices are +bound to their appropriate driver if available. If there is no driver, then +they are bound to a generic PCI driver which does nothing. + +After probing a bus, the available devices will appear in the device tree +under that bus. + +Note that this is all done on a lazy basis, as needed, so until something is +touched on PCI it will not be probed. + +PCI devices can appear in the device tree. If they do this serves to specify +the driver to use for the device. In this case they will be bound at +start-up. + + +Sandbox +------- + +With sandbox we need a device emulator for each device on the bus since there +is no real PCI bus. This works by looking in the device tree node for a +driver. For example: + + + pci@1f,0 { + compatible = "pci-generic"; + reg = <0xf800 0 0 0 0>; + emul@1f,0 { + compatible = "sandbox,swap-case"; + }; + }; + +This means that there is a 'sandbox,swap-case' driver at that bus position. +Note that the first cell in the 'reg' value is the bus/device/function. See +PCI_BDF() for the encoding (it is also specified in the IEEE Std 1275-1994 +PCI bus binding document, v2.1) + +When this bus is scanned we will end up with something like this: + +`- * pci-controller @ 05c660c8, 0 + `- pci@1f,0 @ 05c661c8, 63488 + `- emul@1f,0 @ 05c662c8 + +When accesses go to the pci@1f,0 device they are forwarded to its child, the +emulator. diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index e69de29bb2..8b7e2ee6b0 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -0,0 +1,12 @@ +menu "PCI" + +config DM_PCI + bool "Enable driver mode for PCI" + depends on DM + help + Use driver model for PCI. Driver model is the new method for + orgnising devices in U-Boot. For PCI, driver model keeps track of + available PCI devices, allows scanning of PCI buses and provides + device configuration support. + +endmenu diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 856a5f5b53..db82786e93 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -5,8 +5,14 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifneq ($(CONFIG_DM_PCI),) +obj-$(CONFIG_PCI) += pci-uclass.o pci_compat.o +else +obj-$(CONFIG_PCI) += pci.o +endif +obj-$(CONFIG_PCI) += pci_common.o pci_auto.o pci_rom.o + obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o -obj-$(CONFIG_PCI) += pci.o pci_common.o pci_auto.o pci_rom.o obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o obj-$(CONFIG_PCI_MSC01) += pci_msc01.o diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c new file mode 100644 index 0000000000..d48d865bac --- /dev/null +++ b/drivers/pci/pci-uclass.c @@ -0,0 +1,639 @@ +/* + * Copyright (c) 2014 Google, Inc + * Written by Simon Glass + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct pci_controller *pci_bus_to_hose(int busnum) +{ + struct udevice *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_PCI, busnum, &bus); + if (ret) { + debug("%s: Cannot get bus %d: ret=%d\n", __func__, busnum, ret); + return NULL; + } + return dev_get_uclass_priv(bus); +} + +/** + * pci_get_bus_max() - returns the bus number of the last active bus + * + * @return last bus number, or -1 if no active buses + */ +static int pci_get_bus_max(void) +{ + struct udevice *bus; + struct uclass *uc; + int ret = -1; + + ret = uclass_get(UCLASS_PCI, &uc); + uclass_foreach_dev(bus, uc) { + if (bus->seq > ret) + ret = bus->seq; + } + + debug("%s: ret=%d\n", __func__, ret); + + return ret; +} + +int pci_last_busno(void) +{ + struct pci_controller *hose; + struct udevice *bus; + struct uclass *uc; + int ret; + + debug("pci_last_busno\n"); + ret = uclass_get(UCLASS_PCI, &uc); + if (ret || list_empty(&uc->dev_head)) + return -1; + + /* Probe the last bus */ + bus = list_entry(uc->dev_head.prev, struct udevice, uclass_node); + debug("bus = %p, %s\n", bus, bus->name); + assert(bus); + ret = device_probe(bus); + if (ret) + return ret; + + /* If that bus has bridges, we may have new buses now. Get the last */ + bus = list_entry(uc->dev_head.prev, struct udevice, uclass_node); + hose = dev_get_uclass_priv(bus); + debug("bus = %s, hose = %p\n", bus->name, hose); + + return hose->last_busno; +} + +int pci_get_ff(enum pci_size_t size) +{ + switch (size) { + case PCI_SIZE_8: + return 0xff; + case PCI_SIZE_16: + return 0xffff; + default: + return 0xffffffff; + } +} + +int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn, + struct udevice **devp) +{ + struct udevice *dev; + + for (device_find_first_child(bus, &dev); + dev; + device_find_next_child(&dev)) { + struct pci_child_platdata *pplat; + + pplat = dev_get_parent_platdata(dev); + if (pplat && pplat->devfn == find_devfn) { + *devp = dev; + return 0; + } + } + + return -ENODEV; +} + +int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp) +{ + struct udevice *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_PCI, PCI_BUS(bdf), &bus); + if (ret) + return ret; + return pci_bus_find_devfn(bus, PCI_MASK_BUS(bdf), devp); +} + +static int pci_device_matches_ids(struct udevice *dev, + struct pci_device_id *ids) +{ + struct pci_child_platdata *pplat; + int i; + + pplat = dev_get_parent_platdata(dev); + if (!pplat) + return -EINVAL; + for (i = 0; ids[i].vendor != 0; i++) { + if (pplat->vendor == ids[i].vendor && + pplat->device == ids[i].device) + return i; + } + + return -EINVAL; +} + +int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids, + int *indexp, struct udevice **devp) +{ + struct udevice *dev; + + /* Scan all devices on this bus */ + for (device_find_first_child(bus, &dev); + dev; + device_find_next_child(&dev)) { + if (pci_device_matches_ids(dev, ids) >= 0) { + if ((*indexp)-- <= 0) { + *devp = dev; + return 0; + } + } + } + + return -ENODEV; +} + +int pci_find_device_id(struct pci_device_id *ids, int index, + struct udevice **devp) +{ + struct udevice *bus; + + /* Scan all known buses */ + for (uclass_first_device(UCLASS_PCI, &bus); + bus; + uclass_next_device(&bus)) { + if (!pci_bus_find_devices(bus, ids, &index, devp)) + return 0; + } + *devp = NULL; + + return -ENODEV; +} + +int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, + unsigned long value, enum pci_size_t size) +{ + struct dm_pci_ops *ops; + + ops = pci_get_ops(bus); + if (!ops->write_config) + return -ENOSYS; + return ops->write_config(bus, bdf, offset, value, size); +} + +int pci_write_config(pci_dev_t bdf, int offset, unsigned long value, + enum pci_size_t size) +{ + struct udevice *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_PCI, PCI_BUS(bdf), &bus); + if (ret) + return ret; + + return pci_bus_write_config(bus, PCI_MASK_BUS(bdf), offset, value, + size); +} + +int pci_write_config32(pci_dev_t bdf, int offset, u32 value) +{ + return pci_write_config(bdf, offset, value, PCI_SIZE_32); +} + +int pci_write_config16(pci_dev_t bdf, int offset, u16 value) +{ + return pci_write_config(bdf, offset, value, PCI_SIZE_16); +} + +int pci_write_config8(pci_dev_t bdf, int offset, u8 value) +{ + return pci_write_config(bdf, offset, value, PCI_SIZE_8); +} + +int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset, + unsigned long *valuep, enum pci_size_t size) +{ + struct dm_pci_ops *ops; + + ops = pci_get_ops(bus); + if (!ops->read_config) + return -ENOSYS; + return ops->read_config(bus, bdf, offset, valuep, size); +} + +int pci_read_config(pci_dev_t bdf, int offset, unsigned long *valuep, + enum pci_size_t size) +{ + struct udevice *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_PCI, PCI_BUS(bdf), &bus); + if (ret) + return ret; + + return pci_bus_read_config(bus, PCI_MASK_BUS(bdf), offset, valuep, + size); +} + +int pci_read_config32(pci_dev_t bdf, int offset, u32 *valuep) +{ + unsigned long value; + int ret; + + ret = pci_read_config(bdf, offset, &value, PCI_SIZE_32); + if (ret) + return ret; + *valuep = value; + + return 0; +} + +int pci_read_config16(pci_dev_t bdf, int offset, u16 *valuep) +{ + unsigned long value; + int ret; + + ret = pci_read_config(bdf, offset, &value, PCI_SIZE_16); + if (ret) + return ret; + *valuep = value; + + return 0; +} + +int pci_read_config8(pci_dev_t bdf, int offset, u8 *valuep) +{ + unsigned long value; + int ret; + + ret = pci_read_config(bdf, offset, &value, PCI_SIZE_8); + if (ret) + return ret; + *valuep = value; + + return 0; +} + +int pci_auto_config_devices(struct udevice *bus) +{ + struct pci_controller *hose = bus->uclass_priv; + unsigned int sub_bus; + struct udevice *dev; + int ret; + + sub_bus = bus->seq; + debug("%s: start\n", __func__); + pciauto_config_init(hose); + for (ret = device_find_first_child(bus, &dev); + !ret && dev; + ret = device_find_next_child(&dev)) { + struct pci_child_platdata *pplat; + + pplat = dev_get_parent_platdata(dev); + unsigned int max_bus; + pci_dev_t bdf; + + bdf = PCI_ADD_BUS(bus->seq, pplat->devfn); + debug("%s: device %s\n", __func__, dev->name); + max_bus = pciauto_config_device(hose, bdf); + sub_bus = max(sub_bus, max_bus); + } + debug("%s: done\n", __func__); + + return sub_bus; +} + +int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf) +{ + struct udevice *parent, *bus; + int sub_bus; + int ret; + + debug("%s\n", __func__); + parent = hose->bus; + + /* Find the bus within the parent */ + ret = pci_bus_find_devfn(parent, bdf, &bus); + if (ret) { + debug("%s: Cannot find device %x on bus %s: %d\n", __func__, + bdf, parent->name, ret); + return ret; + } + + sub_bus = pci_get_bus_max() + 1; + debug("%s: bus = %d/%s\n", __func__, sub_bus, bus->name); + pciauto_prescan_setup_bridge(hose, bdf, bus->seq); + + ret = device_probe(bus); + if (ret) { + debug("%s: Cannot probe bus bus %s: %d\n", __func__, bus->name, + ret); + return ret; + } + if (sub_bus != bus->seq) { + printf("%s: Internal error, bus '%s' got seq %d, expected %d\n", + __func__, bus->name, bus->seq, sub_bus); + return -EPIPE; + } + sub_bus = pci_get_bus_max(); + pciauto_postscan_setup_bridge(hose, bdf, sub_bus); + + return sub_bus; +} + +int pci_bind_bus_devices(struct udevice *bus) +{ + ulong vendor, device; + ulong header_type; + pci_dev_t devfn, end; + bool found_multi; + int ret; + + found_multi = false; + end = PCI_DEVFN(PCI_MAX_PCI_DEVICES - 1, PCI_MAX_PCI_FUNCTIONS - 1); + for (devfn = PCI_DEVFN(0, 0); devfn < end; devfn += PCI_DEVFN(0, 1)) { + struct pci_child_platdata *pplat; + struct udevice *dev; + ulong class; + + if (PCI_FUNC(devfn) && !found_multi) + continue; + /* Check only the first access, we don't expect problems */ + ret = pci_bus_read_config(bus, devfn, PCI_HEADER_TYPE, + &header_type, PCI_SIZE_8); + if (ret) + goto error; + pci_bus_read_config(bus, devfn, PCI_VENDOR_ID, &vendor, + PCI_SIZE_16); + if (vendor == 0xffff || vendor == 0x0000) + continue; + + if (!PCI_FUNC(devfn)) + found_multi = header_type & 0x80; + + debug("%s: bus %d/%s: found device %x, function %d\n", __func__, + bus->seq, bus->name, PCI_DEV(devfn), PCI_FUNC(devfn)); + pci_bus_read_config(bus, devfn, PCI_DEVICE_ID, &device, + PCI_SIZE_16); + pci_bus_read_config(bus, devfn, PCI_CLASS_DEVICE, &class, + PCI_SIZE_16); + + /* Find this device in the device tree */ + ret = pci_bus_find_devfn(bus, devfn, &dev); + + /* If nothing in the device tree, bind a generic device */ + if (ret == -ENODEV) { + char name[30], *str; + const char *drv; + + sprintf(name, "pci_%x:%x.%x", bus->seq, + PCI_DEV(devfn), PCI_FUNC(devfn)); + str = strdup(name); + if (!str) + return -ENOMEM; + drv = class == PCI_CLASS_BRIDGE_PCI ? + "pci_bridge_drv" : "pci_generic_drv"; + ret = device_bind_driver(bus, drv, str, &dev); + } + if (ret) + return ret; + + /* Update the platform data */ + pplat = dev_get_parent_platdata(dev); + pplat->devfn = devfn; + pplat->vendor = vendor; + pplat->device = device; + pplat->class = class; + } + + return 0; +error: + printf("Cannot read bus configuration: %d\n", ret); + + return ret; +} + +static int pci_uclass_post_bind(struct udevice *bus) +{ + /* + * Scan the device tree for devices. This does not probe the PCI bus, + * as this is not permitted while binding. It just finds devices + * mentioned in the device tree. + * + * Before relocation, only bind devices marked for pre-relocation + * use. + */ + return dm_scan_fdt_node(bus, gd->fdt_blob, bus->of_offset, + gd->flags & GD_FLG_RELOC ? false : true); +} + +static int decode_regions(struct pci_controller *hose, const void *blob, + int parent_node, int node) +{ + int pci_addr_cells, addr_cells, size_cells; + int cells_per_record; + const u32 *prop; + int len; + int i; + + prop = fdt_getprop(blob, node, "ranges", &len); + if (!prop) + return -EINVAL; + pci_addr_cells = fdt_address_cells(blob, node); + addr_cells = fdt_address_cells(blob, parent_node); + size_cells = fdt_size_cells(blob, node); + + /* PCI addresses are always 3-cells */ + len /= sizeof(u32); + cells_per_record = pci_addr_cells + addr_cells + size_cells; + hose->region_count = 0; + debug("%s: len=%d, cells_per_record=%d\n", __func__, len, + cells_per_record); + for (i = 0; i < MAX_PCI_REGIONS; i++, len -= cells_per_record) { + u64 pci_addr, addr, size; + int space_code; + u32 flags; + int type; + + if (len < cells_per_record) + break; + flags = fdt32_to_cpu(prop[0]); + space_code = (flags >> 24) & 3; + pci_addr = fdtdec_get_number(prop + 1, 2); + prop += pci_addr_cells; + addr = fdtdec_get_number(prop, addr_cells); + prop += addr_cells; + size = fdtdec_get_number(prop, size_cells); + prop += size_cells; + debug("%s: region %d, pci_addr=%" PRIx64 ", addr=%" PRIx64 + ", size=%" PRIx64 ", space_code=%d\n", __func__, + hose->region_count, pci_addr, addr, size, space_code); + if (space_code & 2) { + type = flags & (1U << 30) ? PCI_REGION_PREFETCH : + PCI_REGION_MEM; + } else if (space_code & 1) { + type = PCI_REGION_IO; + } else { + continue; + } + debug(" - type=%d\n", type); + pci_set_region(hose->regions + hose->region_count++, pci_addr, + addr, size, type); + } + + /* Add a region for our local memory */ + pci_set_region(hose->regions + hose->region_count++, 0, 0, + gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + return 0; +} + +static int pci_uclass_pre_probe(struct udevice *bus) +{ + struct pci_controller *hose; + int ret; + + debug("%s, bus=%d/%s, parent=%s\n", __func__, bus->seq, bus->name, + bus->parent->name); + hose = bus->uclass_priv; + + /* For bridges, use the top-level PCI controller */ + if (device_get_uclass_id(bus->parent) == UCLASS_ROOT) { + hose->ctlr = bus; + ret = decode_regions(hose, gd->fdt_blob, bus->parent->of_offset, + bus->of_offset); + if (ret) { + debug("%s: Cannot decode regions\n", __func__); + return ret; + } + } else { + struct pci_controller *parent_hose; + + parent_hose = dev_get_uclass_priv(bus->parent); + hose->ctlr = parent_hose->bus; + } + hose->bus = bus; + hose->first_busno = bus->seq; + hose->last_busno = bus->seq; + + return 0; +} + +static int pci_uclass_post_probe(struct udevice *bus) +{ + int ret; + + /* Don't scan buses before relocation */ + if (!(gd->flags & GD_FLG_RELOC)) + return 0; + + debug("%s: probing bus %d\n", __func__, bus->seq); + ret = pci_bind_bus_devices(bus); + if (ret) + return ret; + +#ifdef CONFIG_PCI_PNP + ret = pci_auto_config_devices(bus); +#endif + + return ret < 0 ? ret : 0; +} + +static int pci_uclass_child_post_bind(struct udevice *dev) +{ + struct pci_child_platdata *pplat; + struct fdt_pci_addr addr; + int ret; + + if (dev->of_offset == -1) + return 0; + + /* + * We could read vendor, device, class if available. But for now we + * just check the address. + */ + pplat = dev_get_parent_platdata(dev); + ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset, + FDT_PCI_SPACE_CONFIG, "reg", &addr); + + if (ret) { + if (ret != -ENOENT) + return -EINVAL; + } else { + /* extract the bdf from fdt_pci_addr */ + pplat->devfn = addr.phys_hi & 0xffff00; + } + + return 0; +} + +int pci_bridge_read_config(struct udevice *bus, pci_dev_t devfn, uint offset, + ulong *valuep, enum pci_size_t size) +{ + struct pci_controller *hose = bus->uclass_priv; + pci_dev_t bdf = PCI_ADD_BUS(bus->seq, devfn); + + return pci_bus_read_config(hose->ctlr, bdf, offset, valuep, size); +} + +int pci_bridge_write_config(struct udevice *bus, pci_dev_t devfn, uint offset, + ulong value, enum pci_size_t size) +{ + struct pci_controller *hose = bus->uclass_priv; + pci_dev_t bdf = PCI_ADD_BUS(bus->seq, devfn); + + return pci_bus_write_config(hose->ctlr, bdf, offset, value, size); +} + +UCLASS_DRIVER(pci) = { + .id = UCLASS_PCI, + .name = "pci", + .post_bind = pci_uclass_post_bind, + .pre_probe = pci_uclass_pre_probe, + .post_probe = pci_uclass_post_probe, + .child_post_bind = pci_uclass_child_post_bind, + .per_device_auto_alloc_size = sizeof(struct pci_controller), + .per_child_platdata_auto_alloc_size = + sizeof(struct pci_child_platdata), +}; + +static const struct dm_pci_ops pci_bridge_ops = { + .read_config = pci_bridge_read_config, + .write_config = pci_bridge_write_config, +}; + +static const struct udevice_id pci_bridge_ids[] = { + { .compatible = "pci-bridge" }, + { } +}; + +U_BOOT_DRIVER(pci_bridge_drv) = { + .name = "pci_bridge_drv", + .id = UCLASS_PCI, + .of_match = pci_bridge_ids, + .ops = &pci_bridge_ops, +}; + +UCLASS_DRIVER(pci_generic) = { + .id = UCLASS_PCI_GENERIC, + .name = "pci_generic", +}; + +static const struct udevice_id pci_generic_ids[] = { + { .compatible = "pci-generic" }, + { } +}; + +U_BOOT_DRIVER(pci_generic_drv) = { + .name = "pci_generic_drv", + .id = UCLASS_PCI_GENERIC, + .of_match = pci_generic_ids, +}; diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index 378efbfd9f..e8da977673 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -432,13 +432,20 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) switch (class) { case PCI_CLASS_BRIDGE_PCI: - hose->current_busno++; + DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", + PCI_DEV(dev)); + pciauto_setup_device(hose, dev, 2, hose->pci_mem, hose->pci_prefetch, hose->pci_io); - DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev)); - +#ifdef CONFIG_DM_PCI + n = dm_pci_hose_probe_bus(hose, dev); + if (n < 0) + return n; + sub_bus = (unsigned int)n; +#else /* Passing in current_busno allows for sibling P2P bridges */ + hose->current_busno++; pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); /* * need to figure out if this is a subordinate bridge on the bus @@ -451,6 +458,7 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) pciauto_postscan_setup_bridge(hose, dev, sub_bus); sub_bus = hose->current_busno; +#endif break; case PCI_CLASS_STORAGE_IDE: @@ -475,7 +483,9 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n", PCI_DEV(dev)); +#ifndef CONFIG_DM_PCI hose->current_busno++; +#endif break; #if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE) diff --git a/drivers/pci/pci_compat.c b/drivers/pci/pci_compat.c new file mode 100644 index 0000000000..d6938c198f --- /dev/null +++ b/drivers/pci/pci_compat.c @@ -0,0 +1,43 @@ +/* + * Compatibility functions for pre-driver-model code + * + * Copyright (C) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#define DEBUG +#include +#include +#include +#include +#include +#include +#include + +#define PCI_HOSE_OP(rw, name, size, type) \ +int pci_hose_##rw##_config_##name(struct pci_controller *hose, \ + pci_dev_t dev, \ + int offset, type value) \ +{ \ + return pci_##rw##_config##size(dev, offset, value); \ +} + +PCI_HOSE_OP(read, byte, 8, u8 *) +PCI_HOSE_OP(read, word, 16, u16 *) +PCI_HOSE_OP(read, dword, 32, u32 *) +PCI_HOSE_OP(write, byte, 8, u8) +PCI_HOSE_OP(write, word, 16, u16) +PCI_HOSE_OP(write, dword, 32, u32) + +pci_dev_t pci_find_devices(struct pci_device_id *ids, int index) +{ + struct pci_child_platdata *pplat; + struct udevice *bus, *dev; + + if (pci_find_device_id(ids, index, &dev)) + return -1; + bus = dev->parent; + pplat = dev_get_parent_platdata(dev); + + return PCI_ADD_BUS(bus->seq, pplat->devfn); +} diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 91bb90dcfb..b984407c09 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -34,6 +34,8 @@ enum uclass_id { UCLASS_I2C_GENERIC, /* Generic I2C device */ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ UCLASS_MOD_EXP, /* RSA Mod Exp device */ + UCLASS_PCI, /* PCI bus */ + UCLASS_PCI_GENERIC, /* Generic PCI bus device */ UCLASS_COUNT, UCLASS_INVALID = -1, diff --git a/include/pci.h b/include/pci.h index 4e8826a03a..07345fd485 100644 --- a/include/pci.h +++ b/include/pci.h @@ -457,12 +457,15 @@ static inline void pci_set_region(struct pci_region *reg, typedef int pci_dev_t; -#define PCI_BUS(d) (((d) >> 16) & 0xff) -#define PCI_DEV(d) (((d) >> 11) & 0x1f) -#define PCI_FUNC(d) (((d) >> 8) & 0x7) -#define PCI_BDF(b,d,f) ((b) << 16 | (d) << 11 | (f) << 8) - -#define PCI_ANY_ID (~0) +#define PCI_BUS(d) (((d) >> 16) & 0xff) +#define PCI_DEV(d) (((d) >> 11) & 0x1f) +#define PCI_FUNC(d) (((d) >> 8) & 0x7) +#define PCI_DEVFN(d, f) ((d) << 11 | (f) << 8) +#define PCI_MASK_BUS(bdf) ((bdf) & 0xffff) +#define PCI_ADD_BUS(bus, devfn) (((bus) << 16) | (devfn)) +#define PCI_BDF(b, d, f) ((b) << 16 | PCI_DEVFN(d, f)) +#define PCI_VENDEV(v, d) (((v) << 16) | (d)) +#define PCI_ANY_ID (~0) struct pci_device_id { unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ @@ -495,7 +498,12 @@ extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev * Structure of a PCI controller (host bridge) */ struct pci_controller { +#ifdef CONFIG_DM_PCI + struct udevice *bus; + struct udevice *ctlr; +#else struct pci_controller *next; +#endif int first_busno; int last_busno; @@ -511,7 +519,7 @@ struct pci_controller { struct pci_config_table *config_table; void (*fixup_irq)(struct pci_controller *, pci_dev_t); - +#ifndef CONFIG_DM_PCI /* Low-level architecture-dependent routines */ int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *); int (*read_word)(struct pci_controller*, pci_dev_t, int where, u16 *); @@ -519,17 +527,21 @@ struct pci_controller { int (*write_byte)(struct pci_controller*, pci_dev_t, int where, u8); int (*write_word)(struct pci_controller*, pci_dev_t, int where, u16); int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32); +#endif /* Used by auto config */ struct pci_region *pci_mem, *pci_io, *pci_prefetch; /* Used by ppc405 autoconfig*/ struct pci_region *pci_fb; +#ifndef CONFIG_DM_PCI int current_busno; void *priv_data; +#endif }; +#ifndef CONFIG_DM_PCI static inline void pci_set_ops(struct pci_controller *hose, int (*read_byte)(struct pci_controller*, pci_dev_t, int where, u8 *), @@ -550,6 +562,7 @@ static inline void pci_set_ops(struct pci_controller *hose, hose->write_word = write_word; hose->write_dword = write_dword; } +#endif #ifdef CONFIG_PCI_INDIRECT_BRIDGE extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data); @@ -602,12 +615,14 @@ extern int pci_hose_write_config_word(struct pci_controller *hose, extern int pci_hose_write_config_dword(struct pci_controller *hose, pci_dev_t dev, int where, u32 val); +#ifndef CONFIG_DM_PCI extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val); extern int pci_read_config_word(pci_dev_t dev, int where, u16 *val); extern int pci_read_config_dword(pci_dev_t dev, int where, u32 *val); extern int pci_write_config_byte(pci_dev_t dev, int where, u8 val); extern int pci_write_config_word(pci_dev_t dev, int where, u16 val); extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val); +#endif extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose, pci_dev_t dev, int where, u8 *val); @@ -719,5 +734,265 @@ int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev); pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum, struct pci_device_id *ids, int *indexp); +/* Access sizes for PCI reads and writes */ +enum pci_size_t { + PCI_SIZE_8, + PCI_SIZE_16, + PCI_SIZE_32, +}; + +struct udevice; + +#ifdef CONFIG_DM_PCI +/** + * struct pci_child_platdata - information stored about each PCI device + * + * Every device on a PCI bus has this per-child data. + * + * It can be accessed using dev_get_parentdata(dev) if dev->parent is a + * PCI bus (i.e. UCLASS_PCI) + * + * @devfn: Encoded device and function index - see PCI_DEVFN() + * @vendor: PCI vendor ID (see pci_ids.h) + * @device: PCI device ID (see pci_ids.h) + * @class: PCI class, 3 bytes: (base, sub, prog-if) + */ +struct pci_child_platdata { + int devfn; + unsigned short vendor; + unsigned short device; + unsigned int class; +}; + +/* PCI bus operations */ +struct dm_pci_ops { + /** + * read_config() - Read a PCI configuration value + * + * PCI buses must support reading and writing configuration values + * so that the bus can be scanned and its devices configured. + * + * Normally PCI_BUS(@bdf) is the same as @bus->seq, but not always. + * If bridges exist it is possible to use the top-level bus to + * access a sub-bus. In that case @bus will be the top-level bus + * and PCI_BUS(bdf) will be a different (higher) value + * + * @bus: Bus to read from + * @bdf: Bus, device and function to read + * @offset: Byte offset within the device's configuration space + * @valuep: Place to put the returned value + * @size: Access size + * @return 0 if OK, -ve on error + */ + int (*read_config)(struct udevice *bus, pci_dev_t bdf, uint offset, + ulong *valuep, enum pci_size_t size); + /** + * write_config() - Write a PCI configuration value + * + * @bus: Bus to write to + * @bdf: Bus, device and function to write + * @offset: Byte offset within the device's configuration space + * @value: Value to write + * @size: Access size + * @return 0 if OK, -ve on error + */ + int (*write_config)(struct udevice *bus, pci_dev_t bdf, uint offset, + ulong value, enum pci_size_t size); +}; + +/* Get access to a PCI bus' operations */ +#define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops) + +/** + * pci_bind_bus_devices() - scan a PCI bus and bind devices + * + * Scan a PCI bus looking for devices. Bind each one that is found. If + * devices are already bound that match the scanned devices, just update the + * child data so that the device can be used correctly (this happens when + * the device tree describes devices we expect to see on the bus). + * + * Devices that are bound in this way will use a generic PCI driver which + * does nothing. The device can still be accessed but will not provide any + * driver interface. + * + * @bus: Bus containing devices to bind + * @return 0 if OK, -ve on error + */ +int pci_bind_bus_devices(struct udevice *bus); + +/** + * pci_auto_config_devices() - configure bus devices ready for use + * + * This works through all devices on a bus by scanning the driver model + * data structures (normally these have been set up by pci_bind_bus_devices() + * earlier). + * + * Space is allocated for each PCI base address register (BAR) so that the + * devices are mapped into memory and I/O space ready for use. + * + * @bus: Bus containing devices to bind + * @return 0 if OK, -ve on error + */ +int pci_auto_config_devices(struct udevice *bus); + +/** + * pci_bus_find_bdf() - Find a device given its PCI bus address + * + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @devp: Returns the device for this address, if found + * @return 0 if OK, -ENODEV if not found + */ +int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp); + +/** + * pci_bus_find_devfn() - Find a device on a bus + * + * @find_devfn: PCI device address (device and function only) + * @devp: Returns the device for this address, if found + * @return 0 if OK, -ENODEV if not found + */ +int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn, + struct udevice **devp); + +/** + * pci_get_ff() - Returns a mask for the given access size + * + * @size: Access size + * @return 0xff for PCI_SIZE_8, 0xffff for PCI_SIZE_16, 0xffffffff for + * PCI_SIZE_32 + */ +int pci_get_ff(enum pci_size_t size); + +/** + * pci_bus_find_devices () - Find devices on a bus + * + * @bus: Bus to search + * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record + * @indexp: Pointer to device index to find. To find the first matching + * device, pass 0; to find the second, pass 1, etc. This + * parameter is decremented for each non-matching device so + * can be called repeatedly. + * @devp: Returns matching device if found + * @return 0 if found, -ENODEV if not + */ +int pci_bus_find_devices(struct udevice *bus, struct pci_device_id *ids, + int *indexp, struct udevice **devp); + +/** + * pci_find_device_id() - Find a device on any bus + * + * @ids: PCI vendor/device IDs to look for, terminated by 0, 0 record + * @index: Index number of device to find, 0 for the first match, 1 for + * the second, etc. + * @devp: Returns matching device if found + * @return 0 if found, -ENODEV if not + */ +int pci_find_device_id(struct pci_device_id *ids, int index, + struct udevice **devp); + +/** + * dm_pci_hose_probe_bus() - probe a subordinate bus, scanning it for devices + * + * This probes the given bus which causes it to be scanned for devices. The + * devices will be bound but not probed. + * + * @hose specifies the PCI hose that will be used for the scan. This is + * always a top-level bus with uclass UCLASS_PCI. The bus to scan is + * in @bdf, and is a subordinate bus reachable from @hose. + * + * @hose: PCI hose to scan + * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number) + * @return 0 if OK, -ve on error + */ +int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf); + +/** + * pci_bus_read_config() - Read a configuration value from a device + * + * TODO(sjg@chromium.org): We should be able to pass just a device and have + * it do the right thing. It would be good to have that function also. + * + * @bus: Bus to read from + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @valuep: Place to put the returned value + * @size: Access size + * @return 0 if OK, -ve on error + */ +int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset, + unsigned long *valuep, enum pci_size_t size); + +/** + * pci_bus_write_config() - Write a configuration value to a device + * + * @bus: Bus to write from + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @value: Value to write + * @size: Access size + * @return 0 if OK, -ve on error + */ +int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, + unsigned long value, enum pci_size_t size); + +/* + * The following functions provide access to the above without needing the + * size parameter. We are trying to encourage the use of the 8/16/32-style + * functions, rather than byte/word/dword. But both are supported. + */ +int pci_write_config32(pci_dev_t pcidev, int offset, u32 value); + +/* Compatibility with old naming */ +static inline int pci_write_config_dword(pci_dev_t pcidev, int offset, + u32 value) +{ + return pci_write_config32(pcidev, offset, value); +} + +int pci_write_config16(pci_dev_t pcidev, int offset, u16 value); + +/* Compatibility with old naming */ +static inline int pci_write_config_word(pci_dev_t pcidev, int offset, + u16 value) +{ + return pci_write_config16(pcidev, offset, value); +} + +int pci_write_config8(pci_dev_t pcidev, int offset, u8 value); + +/* Compatibility with old naming */ +static inline int pci_write_config_byte(pci_dev_t pcidev, int offset, + u8 value) +{ + return pci_write_config8(pcidev, offset, value); +} + +int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep); + +/* Compatibility with old naming */ +static inline int pci_read_config_dword(pci_dev_t pcidev, int offset, + u32 *valuep) +{ + return pci_read_config32(pcidev, offset, valuep); +} + +int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep); + +/* Compatibility with old naming */ +static inline int pci_read_config_word(pci_dev_t pcidev, int offset, + u16 *valuep) +{ + return pci_read_config16(pcidev, offset, valuep); +} + +int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep); + +/* Compatibility with old naming */ +static inline int pci_read_config_byte(pci_dev_t pcidev, int offset, + u8 *valuep) +{ + return pci_read_config8(pcidev, offset, valuep); +} + +#endif + #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */ -- 2.30.2