From fe3b62bbdc66a50c985ba3b0c9e873e5c0862ee2 Mon Sep 17 00:00:00 2001 From: "Marty E. Plummer" Date: Sun, 27 May 2018 00:37:22 -0500 Subject: [PATCH] ath79: initial gl-ar300m support Signed-off-by: Marty E. Plummer --- .../ath79/base-files/etc/board.d/02_network | 5 + target/linux/ath79/dts/qca9533.dtsi | 235 ++++++++++++++++++ .../ath79/dts/qca9533_glinet_ar300m.dtsi | 141 +++++++++++ .../ath79/dts/qca9533_glinet_ar300m_nor.dts | 46 ++++ target/linux/ath79/image/generic.mk | 9 + 5 files changed, 436 insertions(+) create mode 100644 target/linux/ath79/dts/qca9533.dtsi create mode 100644 target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi create mode 100644 target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 88cdd4f1f23..bfea621c125 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -28,6 +28,11 @@ ath79_setup_interfaces() "glinet,ar150") ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + + "glinet,ar300m") + ucidef_set_interfaces_lan_wan "eth1" "eth0" + ;; + "tplink,tl-mr3020-v1") ucidef_set_interface_lan "eth0.1" ucidef_add_switch "switch0" "0@eth0" "1:lan" diff --git a/target/linux/ath79/dts/qca9533.dtsi b/target/linux/ath79/dts/qca9533.dtsi new file mode 100644 index 00000000000..ff1e77e0702 --- /dev/null +++ b/target/linux/ath79/dts/qca9533.dtsi @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +#include +#include "ath79.dtsi" + +/ { + compatible = "qca,qca9533"; + + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips24Kc"; + clocks = <&pll ATH79_CLK_CPU>; + reg = <0>; + }; + }; + + ref: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + ahb { + apb { + ddr_ctrl: memory-controller@18000000 { + compatible = "qca,ar9530-ddr-controller", + "qca,ar7240-ddr-controller"; + reg = <0x18000000 0x128>; + + #qca,ddr-wb-channel-cells = <1>; + }; + + uart: uart@18020000 { + compatible = "ns16550a"; + reg = <0x18020000 0x20>; + + interrupts = <3>; + + clocks = <&pll ATH79_CLK_REF>; + clock-names = "uart"; + + reg-io-width = <4>; + reg-shift = <2>; + no-loopback-test; + + status = "disabled"; + }; + + usb_phy: usb-phy@18030000 { + compatible = "qca,ar7200-usb-phy"; + reg = <0x18030000 0x100>; + #phy-cells = <0>; + + reset-names = "usb-phy", "usb-suspend-override"; + resets = <&rst 4>, <&rst 3>; + + status = "disabled"; + }; + + gpio: gpio@18040000 { + compatible = "qca,ar9530-gpio", + "qca,ar9340-gpio"; + reg = <0x18040000 0x28>; + + interrupts = <2>; + ngpios = <20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pinmux: pinmux@1804002c { + compatible = "pinctrl-single"; + + reg = <0x1804002c 0x48>; + + #size-cells = <0>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + jtag_disable_pins: pinmux_jtag_disable_pins { + pinctrl-single,bits = < + 0x40 0x2 0x2 + >; + }; + }; + + pll: pll-controller@18050000 { + compatible = "qca,qca9530-pll", "syscon"; + reg = <0x18050000 0x48>; + + #clock-cells = <1>; + clocks = <&ref>; + clock-names = "ref"; + clock-output-names = "cpu", "ddr", "ahb"; + }; + + wdt: wdt@18060008 { + compatible = "qca,qca9530-wdt", "qca,ar7130-wdt"; + reg = <0x18060008 0x8>; + + interrupts = <4>; + + clocks = <&pll ATH79_CLK_AHB>; + clock-names = "wdt"; + }; + + rst: reset-controller@1806001c { + compatible = "qca,qca9530-reset", + "qca,ar7100-reset"; + reg = <0x1806001c 0xac>; + + #reset-cells = <1>; + + intc2: interrupt-controller@2 { + compatible = "qcom,qca9556-intc"; + + interrupts = <2>; + + interrupt-controller; + #interrupt-cells = <1>; + + qcom,pending-bits = <0x1f0>, /* pcie rc1 */ + <0xf>; /* wmac */ + }; + }; + + pcie0: pcie-controller@180c0000 { + compatible = "qcom,ar7240-pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0x0>; + reg = <0x180c0000 0x1000>, /* CRP */ + <0x180f0000 0x100>, /* CTRL */ + <0x14000000 0x1000>; /* CFG */ + reg-names = "crp_base", "ctrl_base", "cfg_base"; + ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ + 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ + interrupt-parent = <&intc2>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 1>; + interrupt-map = <0 0 0 0 &pcie0 0>; + status = "disabled"; + }; + + wmac: gmac@18100000 { + compatible = "qca,qca9530-wmac"; + reg = <0x18100000 0x230000>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + + status = "disabled"; + }; + }; + + usb0: usb@1b000000 { + compatible = "generic-ehci"; + reg = <0x1b000000 0x1000>; + + interrupts = <3>; + resets = <&rst 5>; + reset-names = "usb-host"; + dr_mode = "host"; + + has-transaction-translator; + caps-offset = <0x100>; + + phy-names = "usb-phy"; + phys = <&usb_phy>; + + status = "disabled"; + }; + + spi: spi@1f000000 { + compatible = "qca,ar9530-spi", "qca,ar7100-spi"; + reg = <0x1f000000 0x10>; + + clocks = <&pll ATH79_CLK_AHB>; + clock-names = "ahb"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + +}; + +&mdio0 { + resets = <&rst 22>; + reset-names = "mdio"; +}; + +ð0 { + compatible = "qca,qca9530-eth", "syscon"; + pll-data = <0x82000101 0x80000101 0x80001313>; + reg = <0x19000000 0x200 + 0x18070000 0x4>; + pll-reg = <0x4 0x2c 17>; + pll-handle = <&pll>; + + reset-names = "mac"; + resets = <&rst 9>; +}; + + +&mdio1 { + resets = <&rst 23>; + reset-names = "mdio"; + builtin-switch; +}; + +ð1 { + compatible = "qca,qca9530-eth", "syscon"; + resets = <&rst 13>; + reset-names = "mac"; +}; diff --git a/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi b/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi new file mode 100644 index 00000000000..351d3134970 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi @@ -0,0 +1,141 @@ +/dts-v1/; + +#include +#include + +#include "qca9533.dtsi" + +/ { + compatible = "glinet,ar300m", "qca,qca9533"; + model = "GL.iNet GL-AR300M"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + extosc: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ref"; + clock-frequency = <25000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + button@0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "button right"; + linux,code = ; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + + button@3 { + label = "button left"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "gl-ar300m:green:usb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port>; + linux,default-trigger = "usbport"; + }; + + wlan { + label = "gl-ar300m:green:wlan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "gl-ar300m:green:lan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + status { + label = "gl-ar300m:green:status"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&uart { + status = "okay"; +}; + +&usb0 { + status = "okay"; + + hub_port: port@1 { + reg = <1>; + #trigger-soruce-cells = <0>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&pll { + clocks = <&extosc>; +}; + +&mdio0 { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "mii"; + }; +}; + +&mdio1 { + status = "okay"; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + phy-handle = <&phy4>; + phy-mode = "mii"; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x6>; + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x1002>; +}; diff --git a/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts b/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts new file mode 100644 index 00000000000..59793dc90bc --- /dev/null +++ b/target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts @@ -0,0 +1,46 @@ +/dts-v1/; + +#include +#include + +#include "qca9533_glinet_ar300m.dtsi" + +&spi { + status = "okay"; + num-cs = <0>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@1 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@2 { + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@3 { + label = "art"; + reg = <0xff0000 0x010000>; + }; + }; + }; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 16a3c8ed530..f4ed7b34129 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -40,6 +40,15 @@ define Device/glinet_ar150 endef TARGET_DEVICES += glinet_ar150 +define Device/glinet_ar300m_nor + ATH_SOC := qca9533 + DEVICE_TITLE := GL.iNet GL-AR300M + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 + IMAGE_SIZE := 16000k + SUPPORTED_DEVICES += gl-ar300m +endef +TARGET_DEVICES += glinet_ar300m_nor + define Device/openmesh_om5p-ac-v2 ATH_SOC := qca9558 DEVICE_TITLE := OpenMesh OM5P-AC v2 -- 2.30.2