From fc9d53af37deeb830252f03c62724078d943686c Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Thu, 5 May 2005 16:16:01 -0700 Subject: [PATCH] [PATCH] bttv: fix dst i2c read/write timeout failure. Attached is a patch to bttv which fixes the following problems. Affected cards and problems: ~~~~~~~~~~~~~~~~~~~~~~~~ o VP-1020 (200103A) Tuning problems, device detection. o VP-1020 (DST-MOT) Errors during tuning, device detection fails in a while. o VP-1030 (DST-CI) Tuning sometimes fails after CI commands. o VP-2031 (DCT-CI) Tuning problems The timeout happens before the actual timeout occured in the MCU on the board, and hence the problems. Changes: (bttv-i2c.diff) ~~~~~~~~~~~~~~~~~~~~~~~~ o Changed the custom wait queue to wait_event_interruptible_timeout() - Suggestion by Johannes Stezenbach. o Fixed the wait queue timeout problem - This fixes the timeout problem on various cards. - This problem was visible as many * Cannot tune to channels, when signal levels are very low. * app_info does not work in some conditions for CI based cards - Smaller values worked good for newer cards, but the older cards suffered, settled down to the worst case values that could happen in any eventuality. Signed-off-by: Manu Abraham Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/video/bttv-i2c.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c index e42f1ec13f3e..e3f477dff827 100644 --- a/drivers/media/video/bttv-i2c.c +++ b/drivers/media/video/bttv-i2c.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "bttvp.h" @@ -130,17 +131,14 @@ static u32 functionality(struct i2c_adapter *adap) static int bttv_i2c_wait_done(struct bttv *btv) { - DECLARE_WAITQUEUE(wait, current); int rc = 0; - add_wait_queue(&btv->i2c_queue, &wait); - if (0 == btv->i2c_done) - msleep_interruptible(20); - remove_wait_queue(&btv->i2c_queue, &wait); + /* timeout */ + if (wait_event_interruptible_timeout(btv->i2c_queue, + btv->i2c_done, msecs_to_jiffies(85)) == -ERESTARTSYS) + + rc = -EIO; - if (0 == btv->i2c_done) - /* timeout */ - rc = -EIO; if (btv->i2c_done & BT848_INT_RACK) rc = 1; btv->i2c_done = 0; -- 2.30.2