From fc9bde82f34eb81f9f639f9da8dd7369651d871b Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Tue, 16 Jan 2024 23:19:02 +0800 Subject: [PATCH] mediatek: mt7622: simplify 02_network Most mt7622 devices use the mt7531 switch, which have been switched to dsa driver for a long time. So use dsa as the default configuration and configure these rtl8367s devices separately. This reduces the amount of code. Signed-off-by: Chukun Pan --- .../mt7622/base-files/etc/board.d/02_network | 21 ++++++------------- 1 file changed, 6 insertions(+), 15 deletions(-) diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network index 6c43e46222..6bda6e11f3 100644 --- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network @@ -8,19 +8,6 @@ mediatek_setup_interfaces() local board="$1" case $board in - bananapi,bpi-r64|\ - buffalo,wsr-3200ax4s|\ - dlink,eagle-pro-ai-r32-a1|\ - elecom,wrc-x3200gst3|\ - linksys,e8450|\ - linksys,e8450-ubi|\ - mediatek,mt7622-rfb1|\ - mediatek,mt7622-rfb1-ubi|\ - netgear,wax206|\ - reyee,ax3200-e5|\ - ruijie,rg-ew3200gx-pro) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan - ;; buffalo,wsr-2533dhp2) ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" @@ -28,6 +15,11 @@ mediatek_setup_interfaces() dlink,eagle-pro-ai-m32-a1) ucidef_set_interfaces_lan_wan "lan1 lan2" wan ;; + elecom,wrc-2533gent|\ + totolink,a8000ru) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6u@eth0" "5u@eth1" + ;; ubnt,unifi-6-lr*) ucidef_set_interface_lan "eth0" ;; @@ -35,8 +27,7 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" wan ;; *) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6u@eth0" "5u@eth1" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan ;; esac } -- 2.30.2