From fc8895035b0d00d22d4edc6b327cb1805baa5872 Mon Sep 17 00:00:00 2001 From: Oleg Kosheliev Date: Tue, 8 Oct 2013 15:49:55 +0300 Subject: [PATCH] ARMV7: OMAP4: Add struct for twl603x data The data struct is used to support different PMIC chip types. It contains the chip type and the data (e.g. registers addresses, adc multiplier) which is different for twl6030 and twl6032. Replaced some hardcoded values with the structure vars. Based on Balaji T K patches for TI u-boot. Signed-off-by: Oleg Kosheliev --- drivers/power/twl6030.c | 25 ++++++++++++++++++++----- include/twl6030.h | 18 ++++++++++++++++++ 2 files changed, 38 insertions(+), 5 deletions(-) diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c index 0858b60e06..6bf1a33286 100644 --- a/drivers/power/twl6030.c +++ b/drivers/power/twl6030.c @@ -9,6 +9,17 @@ #include +static struct twl6030_data *twl; + +static struct twl6030_data twl6030_info = { + .chip_type = chip_TWL6030, + .adc_rbase = GPCH0_LSB, + .adc_ctrl = CTRL_P2, + .adc_enable = CTRL_P2_SP2, + .vbat_mult = TWL6030_VBAT_MULT, + .vbat_shift = TWL6030_VBAT_SHIFT, +}; + static int twl6030_gpadc_read_channel(u8 channel_no) { u8 lsb = 0; @@ -16,12 +27,12 @@ static int twl6030_gpadc_read_channel(u8 channel_no) int ret = 0; ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, - GPCH0_LSB + channel_no * 2, &lsb); + twl->adc_rbase + channel_no * 2, &lsb); if (ret) return ret; ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, - GPCH0_MSB + channel_no * 2, &msb); + twl->adc_rbase + 1 + channel_no * 2, &msb); if (ret) return ret; @@ -33,7 +44,8 @@ static int twl6030_gpadc_sw2_trigger(void) u8 val; int ret = 0; - ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2); + ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + twl->adc_ctrl, twl->adc_enable); if (ret) return ret; @@ -41,7 +53,8 @@ static int twl6030_gpadc_sw2_trigger(void) val = CTRL_P2_BUSY; while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) { - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, + twl->adc_ctrl, &val); if (ret) return ret; udelay(1000); @@ -116,7 +129,7 @@ int twl6030_get_battery_voltage(void) printf("Failed to read battery voltage\n"); return ret; } - battery_volt = (battery_volt * 25 * 1000) >> (10 + 2); + battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift; printf("Battery Voltage: %d mV\n", battery_volt); return battery_volt; @@ -128,6 +141,8 @@ void twl6030_init_battery_charging(void) int battery_volt = 0; int ret = 0; + twl = &twl6030_info; + /* Enable VBAT measurement */ twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); diff --git a/include/twl6030.h b/include/twl6030.h index b4035ba4fe..9399737ad3 100644 --- a/include/twl6030.h +++ b/include/twl6030.h @@ -113,6 +113,24 @@ #define GPCH0_LSB 0x57 #define GPCH0_MSB 0x58 +#define TWL6030_VBAT_MULT 40 * 1000 + +#define TWL6030_VBAT_SHIFT (10 + 3) + +enum twl603x_chip_type{ + chip_TWL6030, + chip_TWL603X_cnt +}; + +struct twl6030_data{ + u8 chip_type; + u8 adc_rbase; + u8 adc_ctrl; + u8 adc_enable; + int vbat_mult; + int vbat_shift; +}; + /* Functions to read and write from TWL6030 */ static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val) { -- 2.30.2