From fbe17867daddf76ec26be7dbf6b9af3cfad4a54f Mon Sep 17 00:00:00 2001 From: David Bauer Date: Mon, 6 Aug 2018 16:21:03 +0200 Subject: [PATCH] kernel: allow device-tree configuration of at803x This commit adds the ability to configure specific functions of the at803x series ethernet-PHYs, which were previously configured exclusively with the help of platform-data, via device-tree. This is needed to fully support existing boards of the ar71xx platform. Signed-off-by: David Bauer --- ...phy-at803x-allow-to-configure-via-dt.patch | 49 +++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch diff --git a/target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch b/target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch new file mode 100644 index 000000000000..daff25b63381 --- /dev/null +++ b/target/linux/generic/pending-4.14/736-net-phy-at803x-allow-to-configure-via-dt.patch @@ -0,0 +1,49 @@ +Index: linux-4.14.60/drivers/net/phy/at803x.c +=================================================================== +--- linux-4.14.60.orig/drivers/net/phy/at803x.c ++++ linux-4.14.60/drivers/net/phy/at803x.c +@@ -354,6 +354,14 @@ static int at803x_config_init(struct phy + AT803X_DEBUG_TX_CLK_DLY_EN, 0); + } + ++#ifdef CONFIG_OF_MDIO ++ if (phydev->mdio.dev.of_node && ++ of_property_read_bool(phydev->mdio.dev.of_node, ++ "at803x-disable-smarteee")) { ++ at803x_disable_smarteee(phydev); ++ } ++#endif ++ + return 0; + } + +@@ -392,6 +400,7 @@ static void at803x_link_change_notify(st + { + struct at803x_priv *priv = phydev->priv; + struct at803x_platform_data *pdata; ++ u8 fixup_rgmii_tx_delay = 0; + pdata = dev_get_platdata(&phydev->mdio.dev); + + /* +@@ -421,8 +430,19 @@ static void at803x_link_change_notify(st + } else { + priv->phy_reset = false; + } +- if (pdata && pdata->fixup_rgmii_tx_delay && +- phydev->speed != priv->prev_speed) { ++ ++ if (pdata && pdata->fixup_rgmii_tx_delay) ++ fixup_rgmii_tx_delay = 1; ++ ++#ifdef CONFIG_OF_MDIO ++ if (phydev->mdio.dev.of_node && ++ of_property_read_bool(phydev->mdio.dev.of_node, ++ "at803x-fixup-rgmii-tx-delay")) { ++ fixup_rgmii_tx_delay = 1; ++ } ++#endif ++ ++ if (fixup_rgmii_tx_delay && phydev->speed != priv->prev_speed) { + switch (phydev->speed) { + case SPEED_10: + case SPEED_100: -- 2.30.2