From fbb327c5945448e98480d610815143a6d4a63638 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 18 Jan 2011 15:48:48 +0100 Subject: [PATCH] mac80211: drop non-auth 3-addr data frames when running as a 4-addr station When running as a 4-addr station against an AP that has the 4-addr VLAN interface and the main 3-addr AP interface bridged together, sometimes frames originating from the station were looping back from the 3-addr AP interface, causing the bridge code to emit warnings about receiving frames with its own source address. I'm not sure why this is happening yet, but I think it's a good idea to drop all frames (except 802.1x/EAP frames) that do not match the configured addressing mode, including 4-address frames sent to a 3-address station. User test reports indicate that the problem goes away with this patch. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/rx.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index a6701ed87f0d..1236710f70e0 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1556,17 +1556,36 @@ __ieee80211_data_to_8023(struct ieee80211_rx_data *rx) { struct ieee80211_sub_if_data *sdata = rx->sdata; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data; + bool check_port_control = false; + struct ethhdr *ehdr; + int ret; if (ieee80211_has_a4(hdr->frame_control) && sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta) return -1; + if (sdata->vif.type == NL80211_IFTYPE_STATION && + !!sdata->u.mgd.use_4addr != !!ieee80211_has_a4(hdr->frame_control)) { + + if (!sdata->u.mgd.use_4addr) + return -1; + else + check_port_control = true; + } + if (is_multicast_ether_addr(hdr->addr1) && - ((sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta) || - (sdata->vif.type == NL80211_IFTYPE_STATION && sdata->u.mgd.use_4addr))) + sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta) return -1; - return ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type); + ret = ieee80211_data_to_8023(rx->skb, sdata->vif.addr, sdata->vif.type); + if (ret < 0 || !check_port_control) + return ret; + + ehdr = (struct ethhdr *) rx->skb->data; + if (ehdr->h_proto != rx->sdata->control_port_protocol) + return -1; + + return 0; } /* -- 2.30.2