From fb29b91c5b9baff24bfa5146c2649d8dd5e01af3 Mon Sep 17 00:00:00 2001 From: Rui Salvaterra Date: Mon, 4 Apr 2022 15:49:30 +0100 Subject: [PATCH] =?utf8?q?mvebu:=20remove=20all=20=E2=89=A4=205.15-tagged?= =?utf8?q?=20patches?= MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit They're already upstream. Signed-off-by: Rui Salvaterra --- ...s-mcbin-singleshot-add-heartbeat-LED.patch | 65 ------- ...is-omnia-enable-HW-buffer-management.patch | 74 -------- ...rris-omnia-add-comphy-handle-to-eth2.patch | 37 ---- ...rris-omnia-describe-switch-interrupt.patch | 61 ------- ...11-ARM-dts-turris-omnia-add-SFP-node.patch | 90 ---------- ...turris-omnia-add-LED-controller-node.patch | 160 ------------------ ...te-ethernet-phy-node-and-handle-name.patch | 52 ------ ...omnia-fix-hardware-buffer-management.patch | 33 ---- ...14-net-ethernet-marvell-mvnetaMQPrio.patch | 109 ------------ 9 files changed, 681 deletions(-) delete mode 100644 target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch delete mode 100644 target/linux/mvebu/patches-5.15/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch delete mode 100644 target/linux/mvebu/patches-5.15/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch delete mode 100644 target/linux/mvebu/patches-5.15/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch delete mode 100644 target/linux/mvebu/patches-5.15/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch delete mode 100644 target/linux/mvebu/patches-5.15/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch delete mode 100644 target/linux/mvebu/patches-5.15/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch delete mode 100644 target/linux/mvebu/patches-5.15/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch delete mode 100644 target/linux/mvebu/patches-5.15/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch diff --git a/target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch deleted file mode 100644 index c3abae60a6..0000000000 --- a/target/linux/mvebu/patches-5.15/001-v5.11-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch +++ /dev/null @@ -1,65 +0,0 @@ -From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak -Date: Tue, 10 Nov 2020 16:38:31 +0100 -Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED - -With board revision 1.3, SolidRun moved the power LED to the middle of -the board. In old place of power LED a GPIO controllable heartbeat LED -was added. This commit only touches Single Shot variant, since only this -variant is all revision 1.3. - -Note: -This is slightly modified patch. Some boards could be placed in an -enclosure, so the LED18 is enabled by default, since that'll be the only -visible indicator that the board is operating. - -Reported-by: Alexandra Alth -Signed-off-by: Tomasz Maciej Nowak -Signed-off-by: Gregory CLEMENT ---- - .../marvell/armada-8040-mcbin-singleshot.dts | 22 +++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts -+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts -@@ -5,6 +5,8 @@ - * Device Tree file for MACCHIATOBin Armada 8040 community board platform - */ - -+#include -+ - #include "armada-8040-mcbin.dtsi" - - / { -@@ -12,6 +14,20 @@ - compatible = "marvell,armada8040-mcbin-singleshot", - "marvell,armada8040-mcbin", "marvell,armada8040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&cp0_led18_pins>; -+ pinctrl-names = "default"; -+ -+ led18 { -+ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; -+ function = LED_FUNCTION_HEARTBEAT; -+ color = ; -+ linux,default-trigger = "heartbeat"; -+ default-state = "on"; -+ }; -+ }; - }; - - &cp0_eth0 { -@@ -27,3 +43,10 @@ - managed = "in-band-status"; - sfp = <&sfp_eth1>; - }; -+ -+&cp0_pinctrl { -+ cp0_led18_pins: led18-pins { -+ marvell,pins = "mpp33"; -+ marvell,function = "gpio"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-5.15/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch b/target/linux/mvebu/patches-5.15/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch deleted file mode 100644 index 7a4b511998..0000000000 --- a/target/linux/mvebu/patches-5.15/002-v5.11-ARM-dts-turris-omnia-enable-HW-buffer-management.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 018b88eee1a2efda26ed2f09aab33ccdc40ef18f Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Sun, 15 Nov 2020 14:59:17 +0100 -Subject: ARM: dts: turris-omnia: enable HW buffer management -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The buffer manager is available on Turris Omnia but needs to be -described in device-tree to be used. - -Signed-off-by: Marek Behún -Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") -Cc: linux-arm-kernel@lists.infradead.org -Cc: Uwe Kleine-König -Cc: Jason Cooper -Cc: Gregory CLEMENT -Cc: Andreas Färber -Cc: Andrew Lunn -Cc: Rob Herring -Cc: devicetree@vger.kernel.org -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -(limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts') - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -84,12 +84,23 @@ - }; - }; - -+&bm { -+ status = "okay"; -+}; -+ -+&bm_bppi { -+ status = "okay"; -+}; -+ - /* Connected to 88E6176 switch, port 6 */ - ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - phy-mode = "rgmii"; -+ buffer-manager = <&bm>; -+ bm,pool-long = <0>; -+ bm,pool-short = <3>; - - fixed-link { - speed = <1000>; -@@ -103,6 +114,9 @@ - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - phy-mode = "rgmii"; -+ buffer-manager = <&bm>; -+ bm,pool-long = <1>; -+ bm,pool-short = <3>; - - fixed-link { - speed = <1000>; -@@ -115,6 +129,9 @@ - status = "okay"; - phy-mode = "sgmii"; - phy = <&phy1>; -+ buffer-manager = <&bm>; -+ bm,pool-long = <2>; -+ bm,pool-short = <3>; - }; - - &i2c0 { diff --git a/target/linux/mvebu/patches-5.15/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch b/target/linux/mvebu/patches-5.15/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch deleted file mode 100644 index 99ed07e13b..0000000000 --- a/target/linux/mvebu/patches-5.15/003-v5.11-ARM-dts-turris-omnia-add-comphy-handle-to-eth2.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 9ec25ef84832209a8326f9a71fe3ba14f4bcf301 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Sun, 15 Nov 2020 14:59:18 +0100 -Subject: ARM: dts: turris-omnia: add comphy handle to eth2 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The eth2 controller on Turris Omnia is connected to SerDes. For SFP to -be able to switch between 1G and 2.5G modes the comphy link has to be -defined. - -Signed-off-by: Marek Behún -Fixes: f3a6a9f3704a ("ARM: dts: add description for Armada 38x ...") -Reviewed-by: Andrew Lunn -Reviewed-by: Andreas Färber -Cc: linux-arm-kernel@lists.infradead.org -Cc: Uwe Kleine-König -Cc: Jason Cooper -Cc: Gregory CLEMENT -Cc: Rob Herring -Cc: devicetree@vger.kernel.org -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -129,6 +129,7 @@ - status = "okay"; - phy-mode = "sgmii"; - phy = <&phy1>; -+ phys = <&comphy5 2>; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; diff --git a/target/linux/mvebu/patches-5.15/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch b/target/linux/mvebu/patches-5.15/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch deleted file mode 100644 index 4bbd80aac4..0000000000 --- a/target/linux/mvebu/patches-5.15/004-v5.11-ARM-dts-turris-omnia-describe-switch-interrupt.patch +++ /dev/null @@ -1,61 +0,0 @@ -From d29b67c220caf5f4905e1f1576e71bcb6de4af9e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Sun, 15 Nov 2020 14:59:19 +0100 -Subject: ARM: dts: turris-omnia: describe switch interrupt -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Describe switch interrupt for Turris Omnia so that the CPU does not have -to poll the switch. We also need to to set mpp45 pin to gpio function -for this. - -Signed-off-by: Marek Behún -Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") -Cc: linux-arm-kernel@lists.infradead.org -Cc: Uwe Kleine-König -Cc: Jason Cooper -Cc: Gregory CLEMENT -Cc: Andreas Färber -Cc: Andrew Lunn -Cc: Rob Herring -Cc: devicetree@vger.kernel.org -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 12 +++++++++++- - 1 file changed, 11 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -261,13 +261,18 @@ - - /* Switch MV88E6176 at address 0x10 */ - switch@10 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&swint_pins>; - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; -- dsa,member = <0 0>; - -+ dsa,member = <0 0>; - reg = <0x10>; - -+ interrupt-parent = <&gpio1>; -+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>; -+ - ports { - #address-cells = <1>; - #size-cells = <0>; -@@ -320,6 +325,11 @@ - marvell,function = "gpio"; - }; - -+ swint_pins: swint-pins { -+ marvell,pins = "mpp45"; -+ marvell,function = "gpio"; -+ }; -+ - spi0cs0_pins: spi0cs0-pins { - marvell,pins = "mpp25"; - marvell,function = "spi0"; diff --git a/target/linux/mvebu/patches-5.15/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch b/target/linux/mvebu/patches-5.15/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch deleted file mode 100644 index 2447a4e240..0000000000 --- a/target/linux/mvebu/patches-5.15/005-v5.11-ARM-dts-turris-omnia-add-SFP-node.patch +++ /dev/null @@ -1,90 +0,0 @@ -From add2d65962977caf23ca2fa21a2457d31b636574 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Mon, 16 Nov 2020 13:24:22 +0100 -Subject: ARM: dts: turris-omnia: add SFP node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Turris Omnia has an SFP cage that, together with WAN PHY, is connected -to eth2 SerDes via a SerDes multiplexor. When a SFP module is present, -the multiplexor switches the SerDes signal from PHY to SFP. - -Describe the SFP cage, but leave it disabled. Until phylink has support -for such configuration, we are leaving it to U-Boot to enable SFP and -disable WAN PHY at boot time depending on whether a SFP module is -present. - -Signed-off-by: Marek Behún -Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") -Reviewed-by: Andrew Lunn -Cc: Russell King - ARM Linux admin -Cc: linux-arm-kernel@lists.infradead.org -Cc: Uwe Kleine-König -Cc: Jason Cooper -Cc: Gregory CLEMENT -Cc: Andreas Färber -Cc: Rob Herring -Cc: devicetree@vger.kernel.org -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 30 ++++++++++++++++++++++++++- - 1 file changed, 29 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -82,6 +82,24 @@ - }; - }; - }; -+ -+ sfp: sfp { -+ compatible = "sff,sfp"; -+ i2c-bus = <&sfp_i2c>; -+ tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>; -+ tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>; -+ rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>; -+ los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>; -+ mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>; -+ maximum-power-milliwatt = <3000>; -+ -+ /* -+ * For now this has to be enabled at boot time by U-Boot when -+ * a SFP module is present. Read more in the comment in the -+ * eth2 node below. -+ */ -+ status = "disabled"; -+ }; - }; - - &bm { -@@ -126,10 +144,20 @@ - - /* WAN port */ - ð2 { -+ /* -+ * eth2 is connected via a multiplexor to both the SFP cage and to -+ * ethernet-phy@1. The multiplexor switches the signal to SFP cage when -+ * a SFP module is present, as determined by the mode-def0 GPIO. -+ * -+ * Until kernel supports this configuration properly, in case SFP module -+ * is present, U-Boot has to enable the sfp node above, remove phy -+ * handle and add managed = "in-band-status" property. -+ */ - status = "okay"; - phy-mode = "sgmii"; - phy = <&phy1>; - phys = <&comphy5 2>; -+ sfp = <&sfp>; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; -@@ -195,7 +223,7 @@ - /* routed to PCIe2 connector (CN62A) */ - }; - -- i2c@4 { -+ sfp_i2c: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; diff --git a/target/linux/mvebu/patches-5.15/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch b/target/linux/mvebu/patches-5.15/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch deleted file mode 100644 index c69067dbdc..0000000000 --- a/target/linux/mvebu/patches-5.15/006-v5.11-ARM-dts-turris-omnia-add-LED-controller-node.patch +++ /dev/null @@ -1,160 +0,0 @@ -From 91dd42d0e30fdbb250c61d1192af569f07e6ada4 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Sun, 15 Nov 2020 14:59:21 +0100 -Subject: ARM: dts: turris-omnia: add LED controller node -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Linux now has incomplete support for the LED controller on Turris Omnia: -it can set brightness and colors for each LED. - -The controller can also put these LEDs into HW controlled mode, in which -the LEDs are controlled by HW: for example the WAN LED is connected via -MCU to the WAN PHY LED pin. - -The driver does not support these HW controlled modes yet, and on probe -puts the LEDs into SW controlled mode. - -Add node describing the LED controller, but disable it for now. - -Signed-off-by: Marek Behún -Cc: linux-arm-kernel@lists.infradead.org -Cc: Uwe Kleine-König -Cc: Jason Cooper -Cc: Gregory CLEMENT -Cc: Andreas Färber -Cc: Rob Herring -Cc: devicetree@vger.kernel.org -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 111 +++++++++++++++++++++++++- - 1 file changed, 110 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -12,6 +12,7 @@ - - #include - #include -+#include - #include "armada-385.dtsi" - - / { -@@ -181,7 +182,115 @@ - reg = <0>; - - /* STM32F0 command interface at address 0x2a */ -- /* leds device (in STM32F0) at address 0x2b */ -+ -+ led-controller@2b { -+ compatible = "cznic,turris-omnia-leds"; -+ reg = <0x2b>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ /* -+ * LEDs are controlled by MCU (STM32F0) at -+ * address 0x2b. -+ * -+ * The driver does not support HW control mode -+ * for the LEDs yet. Disable the LEDs for now. -+ * -+ * Also LED functions are not stable yet: -+ * - there are 3 LEDs connected via MCU to PCIe -+ * ports. One of these ports supports mSATA. -+ * There is no mSATA nor PCIe function. -+ * For now we use LED_FUNCTION_WLAN, since -+ * in most cases users have wifi cards in -+ * these slots -+ * - there are 2 LEDs dedicated for user: A and -+ * B. Again there is no such function defined. -+ * For now we use LED_FUNCTION_INDICATOR -+ */ -+ status = "disabled"; -+ -+ multi-led@0 { -+ reg = <0x0>; -+ color = ; -+ function = LED_FUNCTION_INDICATOR; -+ function-enumerator = <2>; -+ }; -+ -+ multi-led@1 { -+ reg = <0x1>; -+ color = ; -+ function = LED_FUNCTION_INDICATOR; -+ function-enumerator = <1>; -+ }; -+ -+ multi-led@2 { -+ reg = <0x2>; -+ color = ; -+ function = LED_FUNCTION_WLAN; -+ function-enumerator = <3>; -+ }; -+ -+ multi-led@3 { -+ reg = <0x3>; -+ color = ; -+ function = LED_FUNCTION_WLAN; -+ function-enumerator = <2>; -+ }; -+ -+ multi-led@4 { -+ reg = <0x4>; -+ color = ; -+ function = LED_FUNCTION_WLAN; -+ function-enumerator = <1>; -+ }; -+ -+ multi-led@5 { -+ reg = <0x5>; -+ color = ; -+ function = LED_FUNCTION_WAN; -+ }; -+ -+ multi-led@6 { -+ reg = <0x6>; -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <4>; -+ }; -+ -+ multi-led@7 { -+ reg = <0x7>; -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <3>; -+ }; -+ -+ multi-led@8 { -+ reg = <0x8>; -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <2>; -+ }; -+ -+ multi-led@9 { -+ reg = <0x9>; -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <1>; -+ }; -+ -+ multi-led@a { -+ reg = <0xa>; -+ color = ; -+ function = LED_FUNCTION_LAN; -+ function-enumerator = <0>; -+ }; -+ -+ multi-led@b { -+ reg = <0xb>; -+ color = ; -+ function = LED_FUNCTION_POWER; -+ }; -+ }; - - eeprom@54 { - compatible = "atmel,24c64"; diff --git a/target/linux/mvebu/patches-5.15/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch b/target/linux/mvebu/patches-5.15/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch deleted file mode 100644 index 603a29106b..0000000000 --- a/target/linux/mvebu/patches-5.15/007-v5.11-ARM-dts-turris-omnia-update-ethernet-phy-node-and-handle-name.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 8ee4a5f4f40da60bb85e13d9dd218a3c9197e3e3 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Marek=20Beh=C3=BAn?= -Date: Sun, 15 Nov 2020 14:59:22 +0100 -Subject: ARM: dts: turris-omnia: update ethernet-phy node and handle name -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Use property name `phy-handle` instead of the deprecated `phy` to -connect eth2 to the PHY. -Rename the node from "phy@1" to "ethernet-phy@1", since "phy@1" is -incorrect according to device-tree bindings documentation. -Also remove the "ethernet-phy-id0141.0DD1" compatible string, it is not -needed. Kernel can read the PHY identifier itself. - -Signed-off-by: Marek Behún -Reviewed-by: Andrew Lunn -Cc: linux-arm-kernel@lists.infradead.org -Cc: Uwe Kleine-König -Cc: Jason Cooper -Cc: Gregory CLEMENT -Cc: Andreas Färber -Cc: Rob Herring -Cc: devicetree@vger.kernel.org -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -156,7 +156,7 @@ - */ - status = "okay"; - phy-mode = "sgmii"; -- phy = <&phy1>; -+ phy-handle = <&phy1>; - phys = <&comphy5 2>; - sfp = <&sfp>; - buffer-manager = <&bm>; -@@ -387,9 +387,9 @@ - pinctrl-0 = <&mdio_pins>; - status = "okay"; - -- phy1: phy@1 { -+ phy1: ethernet-phy@1 { - status = "okay"; -- compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22"; -+ compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - marvell,reg-init = <3 18 0 0x4985>; - diff --git a/target/linux/mvebu/patches-5.15/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch b/target/linux/mvebu/patches-5.15/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch deleted file mode 100644 index 7f5322e7f3..0000000000 --- a/target/linux/mvebu/patches-5.15/008-v5.12-ARM-dts-turris-omnia-fix-hardware-buffer-management.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 5b2c7e0ae762fff2b172caf16b2766cc3e1ad859 Mon Sep 17 00:00:00 2001 -From: Rui Salvaterra -Date: Wed, 17 Feb 2021 15:30:38 +0000 -Subject: ARM: dts: turris-omnia: fix hardware buffer management -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Hardware buffer management has never worked on the Turris Omnia, as the -required MBus window hadn't been reserved. Fix thusly. - -Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management") - -Signed-off-by: Rui Salvaterra -Reviewed-by: Marek Behún -Tested-by: Klaus Kudielka -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/armada-385-turris-omnia.dts | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/armada-385-turris-omnia.dts -+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts -@@ -32,7 +32,8 @@ - ranges = ; -+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 -+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; - - internal-regs { - diff --git a/target/linux/mvebu/patches-5.15/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch b/target/linux/mvebu/patches-5.15/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch deleted file mode 100644 index 36d4942f8b..0000000000 --- a/target/linux/mvebu/patches-5.15/701-v5.14-net-ethernet-marvell-mvnetaMQPrio.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 4906887a8ae5f1296f8079bcf4565a6092a8e402 Mon Sep 17 00:00:00 2001 -From: Maxime Chevallier -Date: Tue, 16 Feb 2021 10:25:36 +0100 -Subject: net: mvneta: Implement mqprio support - -Implement a basic MQPrio support, inserting rules in RX that translate -the TC to prio mapping into vlan prio to queues. - -The TX logic stays the same as when we don't offload the qdisc. - -Signed-off-by: Maxime Chevallier -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/marvell/mvneta.c | 61 +++++++++++++++++++++++++++++++++++ - 1 file changed, 61 insertions(+) - -(limited to 'drivers/net/ethernet/marvell/mvneta.c') - ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -102,6 +102,8 @@ - #define MVNETA_TX_NO_DATA_SWAP BIT(5) - #define MVNETA_DESC_SWAP BIT(6) - #define MVNETA_TX_BRST_SZ_MASK(burst) ((burst) << 22) -+#define MVNETA_VLAN_PRIO_TO_RXQ 0x2440 -+#define MVNETA_VLAN_PRIO_RXQ_MAP(prio, rxq) ((rxq) << ((prio) * 3)) - #define MVNETA_PORT_STATUS 0x2444 - #define MVNETA_TX_IN_PRGRS BIT(0) - #define MVNETA_TX_FIFO_EMPTY BIT(8) -@@ -490,6 +492,7 @@ struct mvneta_port { - u8 mcast_count[256]; - u16 tx_ring_size; - u16 rx_ring_size; -+ u8 prio_tc_map[8]; - - phy_interface_t phy_interface; - struct device_node *dn; -@@ -4913,6 +4916,63 @@ static u16 mvneta_select_queue(struct ne - } - #endif - -+static void mvneta_clear_rx_prio_map(struct mvneta_port *pp) -+{ -+ mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0); -+} -+ -+static void mvneta_setup_rx_prio_map(struct mvneta_port *pp) -+{ -+ u32 val = 0; -+ int i; -+ -+ for (i = 0; i < rxq_number; i++) -+ val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]); -+ -+ mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val); -+} -+ -+static int mvneta_setup_mqprio(struct net_device *dev, -+ struct tc_mqprio_qopt *qopt) -+{ -+ struct mvneta_port *pp = netdev_priv(dev); -+ u8 num_tc; -+ int i; -+ -+ qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS; -+ num_tc = qopt->num_tc; -+ -+ if (num_tc > rxq_number) -+ return -EINVAL; -+ -+ if (!num_tc) { -+ mvneta_clear_rx_prio_map(pp); -+ netdev_reset_tc(dev); -+ return 0; -+ } -+ -+ memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map)); -+ -+ mvneta_setup_rx_prio_map(pp); -+ -+ netdev_set_num_tc(dev, qopt->num_tc); -+ for (i = 0; i < qopt->num_tc; i++) -+ netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]); -+ -+ return 0; -+} -+ -+static int mvneta_setup_tc(struct net_device *dev, enum tc_setup_type type, -+ void *type_data) -+{ -+ switch (type) { -+ case TC_SETUP_QDISC_MQPRIO: -+ return mvneta_setup_mqprio(dev, type_data); -+ default: -+ return -EOPNOTSUPP; -+ } -+} -+ - static const struct net_device_ops mvneta_netdev_ops = { - .ndo_open = mvneta_open, - .ndo_stop = mvneta_stop, -@@ -4928,6 +4988,7 @@ static const struct net_device_ops mvnet - #endif - .ndo_bpf = mvneta_xdp, - .ndo_xdp_xmit = mvneta_xdp_xmit, -+ .ndo_setup_tc = mvneta_setup_tc, - }; - - static const struct ethtool_ops mvneta_eth_tool_ops = { -- 2.30.2