From faeca86e50f8a8c6ee6fa735f538bd4b586b11c0 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 31 Jan 2012 18:37:09 +0000 Subject: [PATCH] ar71xx: support for D-LINK DIR-615 rev. E4 This patch adds support for D-LINK DIR-615 E4 board. It's mostly based on the existing support for DIR-600 A1, with some changes in the leds configuration. It's an updated version of the patch that reliably works on my hw for about a year (it was built from trunk on Jan 2011). When I decided to update the firmware and checked for the current support for that device, I also found previously posted patches by Alexey Loukianov that mentioned some stability issues. I'm not sure where could be the difference, the patches are very similar except the wmac led pin number - I was using 1, and those patches used 17. [juhosg: add 3.2 support] Signed-off-by: Vadim Girlin SVN-Revision: 29973 --- target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../ar71xx/base-files/etc/uci-defaults/leds | 8 + .../base-files/etc/uci-defaults/network | 1 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-2.6.39 | 1 + target/linux/ar71xx/config-3.2 | 1 + .../files-2.6.39/arch/mips/ar71xx/Kconfig | 9 + .../files-2.6.39/arch/mips/ar71xx/Makefile | 1 + .../arch/mips/ar71xx/mach-dir-615-e4.c | 183 ++++++++++++++++++ .../files-2.6.39/arch/mips/ar71xx/machtype.h | 1 + .../arch/mips/ath79/mach-dir-615-e4.c | 179 +++++++++++++++++ .../linux/ar71xx/generic/profiles/d-link.mk | 12 ++ target/linux/ar71xx/image/Makefile | 6 + .../610-MIPS-ath79-openwrt-machines.patch | 26 ++- 15 files changed, 428 insertions(+), 7 deletions(-) create mode 100644 target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c create mode 100644 target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index f30ad052236..a3d5075a281 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -57,6 +57,9 @@ get_status_led() { dir-615-c1) status_led="dir-615c1:green:status" ;; + dir-615-e4) + status_led="dir-615-e4:green:power" + ;; dir-825-b1) status_led="dir825b1:orange:power" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index d9613930d48..c33510af461 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -118,6 +118,14 @@ rb750) set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02" ;; +dir-615-e4) + set_led_netdev "wan" "WAN" "dir-615-e4:green:wan" "eth1" + set_led_switch "lan1" "LAN1" "dir-615-e4:green:lan1" "switch0" "0x02" + set_led_switch "lan2" "LAN2" "dir-615-e4:green:lan2" "switch0" "0x04" + set_led_switch "lan3" "LAN3" "dir-615-e4:green:lan3" "switch0" "0x08" + set_led_switch "lan4" "LAN4" "dir-615-e4:green:lan4" "switch0" "0x10" + ;; + dir-825-b1) set_led_usbdev "usb" "USB" "dir825b1:blue:usb" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network index ca998981832..613b2a0e87a 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network @@ -137,6 +137,7 @@ ap96 |\ airrouter |\ dir-600-a1 |\ dir-615-c1 |\ +dir-615-e4 |\ ja76pf |\ rb-750 |\ tew-632brp |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 9f117225f19..82b53f16179 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -166,6 +166,9 @@ ar71xx_board_detect() { *"DIR-600 rev. A1") name="dir-600-a1" ;; + *"DIR-615 rev. E4") + name="dir-615-e4" + ;; *"DIR-825 rev. B1") name="dir-825-b1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 49df3c39667..3adfcd58b34 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -97,6 +97,7 @@ platform_check_image() { ap83 | \ dir-600-a1 | \ dir-615-c1 | \ + dir-615-e4 | \ dir-825-b1 | \ mzk-w04nu | \ mzk-w300nh | \ diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39 index 4f51b1a2b97..b8a91b50f30 100644 --- a/target/linux/ar71xx/config-2.6.39 +++ b/target/linux/ar71xx/config-2.6.39 @@ -25,6 +25,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y CONFIG_AR71XX_MACH_DB120=y CONFIG_AR71XX_MACH_DIR_600_A1=y CONFIG_AR71XX_MACH_DIR_615_C1=y +CONFIG_AR71XX_MACH_DIR_615_E4=y CONFIG_AR71XX_MACH_DIR_825_B1=y CONFIG_AR71XX_MACH_EAP7660D=y CONFIG_AR71XX_MACH_HORNET_UB=y diff --git a/target/linux/ar71xx/config-3.2 b/target/linux/ar71xx/config-3.2 index 50fe18fd95a..c3bcc763ff7 100644 --- a/target/linux/ar71xx/config-3.2 +++ b/target/linux/ar71xx/config-3.2 @@ -34,6 +34,7 @@ CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_DIR_600_A1=y CONFIG_ATH79_MACH_DIR_615_C1=y +CONFIG_ATH79_MACH_DIR_615_E4=y CONFIG_ATH79_MACH_DIR_825_B1=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_HORNET_UB=y diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig index 60db3ef4152..14982b1953d 100644 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig @@ -104,6 +104,15 @@ config AR71XX_MACH_DIR_615_C1 select AR71XX_DEV_LEDS_GPIO select AR71XX_NVRAM +config AR71XX_MACH_DIR_615_E4 + bool "D-Link DIR-615 rev. E4 support" + select SOC_AR724X + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_NVRAM + config AR71XX_MACH_DIR_825_B1 bool "D-Link DIR-825 rev. B1 board support" select SOC_AR71XX diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile index 22e32e5acc6..546ff34cc33 100644 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o +obj-$(CONFIG_AR71XX_MACH_DIR_615_E4) += mach-dir-615-e4.o obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c new file mode 100644 index 00000000000..943929a59c0 --- /dev/null +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c @@ -0,0 +1,183 @@ +/* + * D-Link DIR-615 rev. E4 board support + * + * Copyright (C) 2010 Gabor Juhos + * Copyright (C) 2012 Vadim Girlin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "nvram.h" + +#define DIR_615_E4_GPIO_LED_WPS 0 +#define DIR_615_E4_GPIO_LED_POWER_AMBER 1 +#define DIR_615_E4_GPIO_LED_POWER_GREEN 6 +#define DIR_615_E4_GPIO_LED_WAN_AMBER 7 +#define DIR_615_E4_GPIO_LED_WAN_GREEN 17 +#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13 +#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14 +#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15 +#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16 + +#define DIR_615_E4_GPIO_BTN_RESET 8 +#define DIR_615_E4_GPIO_BTN_WPS 12 + +#define DIR_615_E4_KEYS_POLL_INTERVAL 20 +#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL) + +#define DIR_615_E4_NVRAM_ADDR 0x1f030000 +#define DIR_615_E4_NVRAM_SIZE 0x10000 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition dir_615_e4_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "nvram", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "mac", + .offset = 0x3e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data dir_615_e4_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .parts = dir_615_e4_partitions, + .nr_parts = ARRAY_SIZE(dir_615_e4_partitions), +#endif +}; + + +static struct gpio_led dir_615_e4_leds_gpio[] __initdata = { + { + .name = "dir-615-e4:green:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN, + }, { + .name = "dir-615-e4:amber:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER, + }, { + .name = "dir-615-e4:green:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:amber:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER, + }, { + .name = "dir-615-e4:green:lan1", + .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan2", + .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan3", + .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan4", + .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:blue:wps", + .gpio = DIR_615_E4_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_615_e4_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac_buff[6]; + u8 *mac = NULL; + + if (nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE, + "lan_mac=", mac_buff) == 0) { + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ar71xx_add_device_m25p80(&dir_615_e4_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio), + dir_615_e4_leds_gpio); + + ar71xx_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_e4_gpio_keys), + dir_615_e4_gpio_keys); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + ar71xx_add_device_mdio(0, 0x0); + + /* LAN ports */ + ar71xx_add_device_eth(1); + + /* WAN port */ + ar71xx_add_device_eth(0); + + ap91_pci_setup_wmac_led_pin(1); + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", + dir_615_e4_setup); diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h index 452055d78ff..82fc944cb36 100644 --- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h @@ -29,6 +29,7 @@ enum ar71xx_mach_type { AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ + AR71XX_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c new file mode 100644 index 00000000000..cce5dce7953 --- /dev/null +++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c @@ -0,0 +1,179 @@ +/* + * D-Link DIR-615 rev. E4 board support + * + * Copyright (C) 2010 Gabor Juhos + * Copyright (C) 2012 Vadim Girlin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include + +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "machtypes.h" +#include "nvram.h" + +#define DIR_615_E4_GPIO_LED_WPS 0 +#define DIR_615_E4_GPIO_LED_POWER_AMBER 1 +#define DIR_615_E4_GPIO_LED_POWER_GREEN 6 +#define DIR_615_E4_GPIO_LED_WAN_AMBER 7 +#define DIR_615_E4_GPIO_LED_WAN_GREEN 17 +#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13 +#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14 +#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15 +#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16 + +#define DIR_615_E4_GPIO_BTN_RESET 8 +#define DIR_615_E4_GPIO_BTN_WPS 12 + +#define DIR_615_E4_KEYS_POLL_INTERVAL 20 +#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL) + +#define DIR_615_E4_NVRAM_ADDR 0x1f030000 +#define DIR_615_E4_NVRAM_SIZE 0x10000 + +static struct mtd_partition dir_615_e4_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "nvram", + .offset = 0x030000, + .size = 0x010000, + }, { + .name = "kernel", + .offset = 0x040000, + .size = 0x0e0000, + }, { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2c0000, + }, { + .name = "mac", + .offset = 0x3e0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x040000, + .size = 0x3a0000, + } +}; + +static struct flash_platform_data dir_615_e4_flash_data = { + .parts = dir_615_e4_partitions, + .nr_parts = ARRAY_SIZE(dir_615_e4_partitions), +}; + + +static struct gpio_led dir_615_e4_leds_gpio[] __initdata = { + { + .name = "dir-615-e4:green:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN, + }, { + .name = "dir-615-e4:amber:power", + .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER, + }, { + .name = "dir-615-e4:green:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:amber:wan", + .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER, + }, { + .name = "dir-615-e4:green:lan1", + .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan2", + .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan3", + .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:green:lan4", + .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN, + .active_low = 1, + }, { + .name = "dir-615-e4:blue:wps", + .gpio = DIR_615_E4_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_E4_GPIO_BTN_WPS, + .active_low = 1, + } +}; + +static void __init dir_615_e4_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 mac_buff[6]; + u8 *mac = NULL; + + if (ath79_nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE, + "lan_mac=", mac_buff) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ath79_register_m25p80(&dir_615_e4_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio), + dir_615_e4_leds_gpio); + + ath79_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_e4_gpio_keys), + dir_615_e4_gpio_keys); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + + /* WAN port */ + ath79_register_eth(0); + + ap9x_pci_setup_wmac_led_pin(0, 1); + ap91_pci_init(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4", + dir_615_e4_setup); diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk index ec79ddecf43..3068c4f31ac 100644 --- a/target/linux/ar71xx/generic/profiles/d-link.mk +++ b/target/linux/ar71xx/generic/profiles/d-link.mk @@ -29,6 +29,18 @@ endef $(eval $(call Profile,DIR615C1)) +define Profile/DIR615E4 + NAME:=D-Link DIR-615 rev. E4 + PACKAGES:= +endef + +define Profile/DIR615E4/Description + Package set optimized for the D-Link DIR-615 rev. E4. +endef + +$(eval $(call Profile,DIR615E4)) + + define Profile/DIR825B1 NAME:=D-Link DIR-825 rev. B1 PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index bd5e945f59c..19e26ad2d64 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -698,6 +698,11 @@ define Image/Build/Profile/DIR600A1 $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,$(dir600a1_cmdline),"AP91-AR7240-RT-090223-00") endef +dir615e4_cmdline=board=DIR-615-E4 console=ttyS0,115200 +define Image/Build/Profile/DIR615E4 + $(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-615-e4,$(dir615e4_cmdline),"AP99-AR7240-RT-091105-05") +endef + eap7660d_cmdline=board=EAP7660D console=ttyS0,115200 define Image/Build/Profile/EAP7660D $(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,$(eap7660d_cmdline)) @@ -995,6 +1000,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/DB120,$(1)) $(call Image/Build/Profile/DIR600A1,$(1)) $(call Image/Build/Profile/DIR615C1,$(1)) + $(call Image/Build/Profile/DIR615E4,$(1)) $(call Image/Build/Profile/DIR825B1,$(1)) $(call Image/Build/Profile/EAP7660D,$(1)) $(call Image/Build/Profile/FR54RTR,$(1)) diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch index d5204cb0827..e6542a17417 100644 --- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,17 +16,80 @@ +@@ -16,17 +16,81 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -18,6 +18,7 @@ ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ + ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */ + ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ + ATH79_MACH_EAP7660D, /* Senao EAP7660D */ + ATH79_MACH_JA76PF, /* jjPlus JA76PF */ @@ -187,7 +188,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -54,6 +137,369 @@ config ATH79_MACH_PB44 +@@ -54,6 +137,379 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -296,6 +297,16 @@ + select ATH79_DEV_WMAC + select ATH79_NVRAM + ++config ATH79_MACH_DIR_615_E4 ++ bool "D-Link DIR-615 rev. E4 support" ++ select SOC_AR724X ++ select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_NVRAM ++ +config ATH79_MACH_DIR_825_B1 + bool "D-Link DIR-825 rev. B1 board support" + select SOC_AR71XX @@ -557,7 +568,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM (rev 1.0) board" select SOC_AR724X -@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM +@@ -67,6 +523,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -582,7 +593,7 @@ endmenu config SOC_AR71XX -@@ -96,10 +560,6 @@ config SOC_AR934X +@@ -96,10 +570,6 @@ config SOC_AR934X select PCI_AR724X if PCI def_bool n @@ -593,7 +604,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -110,7 +570,14 @@ config ATH79_DEV_DSA +@@ -110,7 +580,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -609,7 +620,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -135,4 +602,7 @@ config ATH79_NVRAM +@@ -135,4 +612,7 @@ config ATH79_NVRAM config ATH79_PCI_ATH9K_FIXUP def_bool n @@ -619,7 +630,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p +@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p # # Machines # @@ -635,6 +646,7 @@ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_ATH79_MACH_DIR_615_E4) += mach-dir-615-e4.o +obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o +obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o +obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o -- 2.30.2