From fab8125919c0fc724e11b184b1c812dfb8990549 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 4 Jul 2010 12:23:19 -0300 Subject: [PATCH] V4L/DVB: DocBook/media: Add LIRC DocBook to media.html Add LIRC interface into the media.html DocBook, fixing several small XML errors at the original spec. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media-entities.tmpl | 1 + Documentation/DocBook/media.tmpl | 4 +- .../DocBook/v4l/lirc_device_interface.xml | 88 +++++++++---------- .../DocBook/v4l/remote_controllers.xml | 2 + 4 files changed, 49 insertions(+), 46 deletions(-) diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 5d4d40f429a5..6ae97157b1c7 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -218,6 +218,7 @@ + diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl index fe10bd7721f2..f11048d4053f 100644 --- a/Documentation/DocBook/media.tmpl +++ b/Documentation/DocBook/media.tmpl @@ -61,7 +61,7 @@ Foundation. A copy of the license is included in the chapter entitled in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated to documment support also for DVB-S2, ISDB-T and ISDB-S. - The third part covers other API's used by all media infrastructure devices + The third part covers Remote Controller API For additional information and for the latest development code, see: http://linuxtv.org. For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. @@ -101,7 +101,7 @@ Foundation. A copy of the license is included in the chapter entitled -Other API's used by media infrastructure drivers +Remote Controller API &sub-remote_controllers; diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml index d9ae6803c2fc..0413234023d4 100644 --- a/Documentation/DocBook/v4l/lirc_device_interface.xml +++ b/Documentation/DocBook/v4l/lirc_device_interface.xml @@ -1,3 +1,4 @@ +
LIRC Device Interface @@ -17,15 +18,13 @@ and ioctl. lirc_dev: IR Remote Control driver registered, major 248 rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0 - What you should see for a chardev:
$ ls -l /dev/lirc* crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0
- - +
LIRC read fop @@ -33,12 +32,12 @@ and ioctl. The lircd userspace daemon reads raw IR data from the LIRC chardev. The exact format of the data depends on what modes a driver supports, and what mode has been selected. lircd obtains supported modes and sets the active mode -via the ioctl interface, detailed at . The generally +via the ioctl interface, detailed at . The generally preferred mode is LIRC_MODE_MODE2, in which packets containing an int value describing an IR signal are read from the chardev. -See also http://www.lirc.org/html/technical.html for more info. - +See also http://www.lirc.org/html/technical.html for more info. +
LIRC write fop @@ -48,10 +47,10 @@ values. Pulses and spaces are only marked implicitly by their position. The data must start and end with a pulse, therefore, the data must always include an unevent number of samples. The write function must block until the data has been transmitted by the hardware. - +
- LIRC ioctl fop +LIRC ioctl fop The LIRC device's ioctl definition is bound by the ioctl function definition of struct file_operations, leaving us with an unsigned int @@ -69,167 +68,168 @@ on working with the default settings initially. LIRC_GET_FEATURES - Obviously, get the underlying hardware device's features. If a driver + Obviously, get the underlying hardware device's features. If a driver does not announce support of certain features, calling of the corresponding - ioctls is undefined. + ioctls is undefined. LIRC_GET_SEND_MODE - Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd. + Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd. LIRC_GET_REC_MODE - Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE - are supported by lircd. + Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE + are supported by lircd. LIRC_GET_SEND_CARRIER - Get carrier frequency (in Hz) currently used for transmit. + Get carrier frequency (in Hz) currently used for transmit. LIRC_GET_REC_CARRIER - Get carrier frequency (in Hz) currently used for IR reception. + Get carrier frequency (in Hz) currently used for IR reception. LIRC_{G,S}ET_{SEND,REC}_DUTY_CYCLE - Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently, + Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently, no special meaning is defined for 0 or 100, but this could be used to switch - off carrier generation in the future, so these values should be reserved. + off carrier generation in the future, so these values should be reserved. LIRC_GET_REC_RESOLUTION - Some receiver have maximum resolution which is defined by internal + Some receiver have maximum resolution which is defined by internal sample rate or data format limitations. E.g. it's common that signals can only be reported in 50 microsecond steps. This integer value is used by lircd to automatically adjust the aeps tolerance value in the lircd - config file. + config file. LIRC_GET_M{IN,AX}_TIMEOUT - Some devices have internal timers that can be used to detect when + Some devices have internal timers that can be used to detect when there's no IR activity for a long time. This can help lircd in detecting that a IR signal is finished and can speed up the decoding process. Returns an integer value with the minimum/maximum timeout that can be set. Some devices have a fixed timeout, in that case both ioctls will - return the same value even though the timeout cannot be changed. + return the same value even though the timeout cannot be changed. LIRC_GET_M{IN,AX}_FILTER_{PULSE,SPACE} - Some devices are able to filter out spikes in the incoming signal + Some devices are able to filter out spikes in the incoming signal using given filter rules. These ioctls return the hardware capabilities that describe the bounds of the possible filters. Filter settings depend on the IR protocols that are expected. lircd derives the settings from - all protocols definitions found in its config file. + all protocols definitions found in its config file. LIRC_GET_LENGTH - Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE). + Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE). Reads on the device must be done in blocks matching the bit count. - The bit could should be rounded up so that it matches full bytes. + The bit could should be rounded up so that it matches full bytes. LIRC_SET_{SEND,REC}_MODE - Set send/receive mode. Largely obsolete for send, as only - LIRC_MODE_PULSE is supported. + Set send/receive mode. Largely obsolete for send, as only + LIRC_MODE_PULSE is supported. LIRC_SET_{SEND,REC}_CARRIER - Set send/receive carrier (in Hz). + Set send/receive carrier (in Hz). LIRC_SET_TRANSMITTER_MASK - This enables the given set of transmitters. The first transmitter + This enables the given set of transmitters. The first transmitter is encoded by the least significant bit, etc. When an invalid bit mask is given, i.e. a bit is set, even though the device does not have so many transitters, then this ioctl returns the number of available transitters - and does nothing otherwise. + and does nothing otherwise. LIRC_SET_REC_TIMEOUT - Sets the integer value for IR inactivity timeout (cf. + Sets the integer value for IR inactivity timeout (cf. LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT). A value of 0 (if supported by the hardware) disables all hardware timeouts and data should be reported as soon as possible. If the exact value cannot be set, then - the next possible value _greater_ than the given value should be set. + the next possible value _greater_ than the given value should be set. LIRC_SET_REC_TIMEOUT_REPORTS - Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By - default, timeout reports should be turned off. + Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By + default, timeout reports should be turned off. LIRC_SET_REC_FILTER_{,PULSE,SPACE} - Pulses/spaces shorter than this are filtered out by hardware. If + Pulses/spaces shorter than this are filtered out by hardware. If filters cannot be set independently for pulse/space, the corresponding - ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead. + ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead. LIRC_SET_MEASURE_CARRIER_MODE - Enable (1)/disable (0) measure mode. If enabled, from the next key + Enable (1)/disable (0) measure mode. If enabled, from the next key press on, the driver will send LIRC_MODE2_FREQUENCY packets. By default - this should be turned off. + this should be turned off. LIRC_SET_REC_{DUTY_CYCLE,CARRIER}_RANGE - To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE + To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE with the lower bound first and later LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER - with the upper bound. + with the upper bound. LIRC_NOTIFY_DECODE - This ioctl is called by lircd whenever a successful decoding of an + This ioctl is called by lircd whenever a successful decoding of an incoming IR signal could be done. This can be used by supporting hardware - to give visual feedback to the user e.g. by flashing a LED. + to give visual feedback to the user e.g. by flashing a LED. LIRC_SETUP_{START,END} - Setting of several driver parameters can be optimized by encapsulating + Setting of several driver parameters can be optimized by encapsulating the according ioctl calls with LIRC_SETUP_START/LIRC_SETUP_END. When a driver receives a LIRC_SETUP_START ioctl it can choose to not commit further setting changes to the hardware until a LIRC_SETUP_END is received. But this is open to the driver implementation and every driver must also handle parameter changes which are not encapsulated by LIRC_SETUP_START - and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls. + and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.
+ diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml index 73f5eab091f4..3c3b667b28e7 100644 --- a/Documentation/DocBook/v4l/remote_controllers.xml +++ b/Documentation/DocBook/v4l/remote_controllers.xml @@ -173,3 +173,5 @@ keymapping. This program demonstrates how to replace the keymap tables. &sub-keytable-c; + +&sub-lirc_device_interface; -- 2.30.2