From f9481b08220d7dc1ff21e296a330ee8b721b44e4 Mon Sep 17 00:00:00 2001 From: Tudor Ambarus Date: Wed, 19 Jun 2019 14:38:28 +0000 Subject: [PATCH] spi: fix ctrl->num_chipselect constraint at91sam9g25ek showed the following error at probe: atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers atmel_spi: probe of f0000000.spi failed with error -22 Commit 0a919ae49223 ("spi: Don't call spi_get_gpio_descs() before device name is set") moved the calling of spi_get_gpio_descs() after ctrl->dev is set, but didn't move the !ctrl->num_chipselect check. When there are chip selects in the device tree, the spi-atmel driver lets the SPI core discover them when registering the SPI master. The ctrl->num_chipselect is thus expected to be set by spi_get_gpio_descs(). Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was before the aforementioned commit. While touching this block, get rid of the explicit comparison with 0 and update the commenting style. Fixes: 0a919ae49223 ("spi: Don't call spi_get_gpio_descs() before device name is set") Signed-off-by: Tudor Ambarus Signed-off-by: Mark Brown --- drivers/spi/spi.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index a31e1e291335..80d2d14f6294 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2375,11 +2375,6 @@ int spi_register_controller(struct spi_controller *ctlr) if (status) return status; - /* even if it's just one always-selected device, there must - * be at least one chipselect - */ - if (ctlr->num_chipselect == 0) - return -EINVAL; if (ctlr->bus_num >= 0) { /* devices with a fixed bus num must check-in with the num */ mutex_lock(&board_lock); @@ -2450,6 +2445,13 @@ int spi_register_controller(struct spi_controller *ctlr) } } + /* + * Even if it's just one always-selected device, there must + * be at least one chipselect. + */ + if (!ctlr->num_chipselect) + return -EINVAL; + status = device_add(&ctlr->dev); if (status < 0) { /* free bus id */ -- 2.30.2