From f8b2bc550bd57e59e5def03e397ccfc6fcc0a81c Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 14 Nov 2021 19:45:34 +0100 Subject: [PATCH] realtek: Remove _machine_restart and _machine_halt By dropping _machine_restart, users can provide more reliable or device-specific restart modes. _machine_halt was already removed in commit f4b687d1f053 ("realtek: use kernel defined halt"), but quietly reintroduced in commit 8faffa00cb6b ("realtek: add support for the RTL9300 timer"). Let's remove it again. Signed-off-by: Sander Vanheule Tested-by: Stijn Segers Tested-by: Paul Fertser Tested-by: Stijn Tintel --- .../files-5.10/arch/mips/rtl838x/setup.c | 85 ------------------- 1 file changed, 85 deletions(-) diff --git a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c index 752a856437..55419c7b0b 100644 --- a/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c +++ b/target/linux/realtek/files-5.10/arch/mips/rtl838x/setup.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -29,100 +28,20 @@ extern struct rtl83xx_soc_info soc_info; -u32 pll_reset_value; - -static void rtl838x_restart(char *command) -{ - u32 pll = sw_r32(RTL838X_PLL_CML_CTRL); - - pr_info("System restart.\n"); - pr_info("PLL control register: %x, applying reset value %x\n", - pll, pll_reset_value); - - sw_w32(3, RTL838X_INT_RW_CTRL); - sw_w32(pll_reset_value, RTL838X_PLL_CML_CTRL); - sw_w32(0, RTL838X_INT_RW_CTRL); - - /* Reset Global Control1 Register */ - sw_w32(1, RTL838X_RST_GLB_CTRL_1); -} - -static void rtl839x_restart(char *command) -{ - /* SoC reset vector (in flash memory): on RTL839x platform preferred way to reset */ - void (*f)(void) = (void *) 0xbfc00000; - - pr_info("System restart.\n"); - /* Reset SoC */ - sw_w32(0xFFFFFFFF, RTL839X_RST_GLB_CTRL); - /* and call reset vector */ - f(); - /* If this fails, halt the CPU */ - while - (1); -} - -static void rtl930x_restart(char *command) -{ - pr_info("System restart.\n"); - sw_w32(0x1, RTL930X_RST_GLB_CTRL_0); - while - (1); -} - -static void rtl931x_restart(char *command) -{ - u32 v; - - pr_info("System restart.\n"); - sw_w32(1, RTL931X_RST_GLB_CTRL); - v = sw_r32(RTL931X_RST_GLB_CTRL); - sw_w32(0x101, RTL931X_RST_GLB_CTRL); - msleep(15); - sw_w32(v, RTL931X_RST_GLB_CTRL); - msleep(15); - sw_w32(0x101, RTL931X_RST_GLB_CTRL); -} - -static void rtl838x_halt(void) -{ - pr_info("System halted.\n"); - while - (1); -} - static void __init rtl838x_setup(void) { - pr_info("Registering _machine_restart\n"); - _machine_restart = rtl838x_restart; - _machine_halt = rtl838x_halt; - - /* This PLL value needs to be restored before a reset and will then be - * preserved over a SoC reset. A wrong value prevents the SoC from - * connecting to the SPI flash controller at boot and reading the - * reset routine */ - pll_reset_value = sw_r32(RTL838X_PLL_CML_CTRL); - /* Setup System LED. Bit 15 then allows to toggle it */ sw_w32_mask(0, 3 << 16, RTL838X_LED_GLB_CTRL); } static void __init rtl839x_setup(void) { - pr_info("Registering _machine_restart\n"); - _machine_restart = rtl839x_restart; - _machine_halt = rtl838x_halt; - /* Setup System LED. Bit 14 of RTL839X_LED_GLB_CTRL then allows to toggle it */ sw_w32_mask(0, 3 << 15, RTL839X_LED_GLB_CTRL); } static void __init rtl930x_setup(void) { - pr_info("Registering _machine_restart\n"); - _machine_restart = rtl930x_restart; - _machine_halt = rtl838x_halt; - if (soc_info.id == 0x9302) sw_w32_mask(0, 3 << 13, RTL9302_LED_GLB_CTRL); else @@ -131,9 +50,6 @@ static void __init rtl930x_setup(void) static void __init rtl931x_setup(void) { - pr_info("Registering _machine_restart\n"); - _machine_restart = rtl931x_restart; - _machine_halt = rtl838x_halt; sw_w32_mask(0, 3 << 12, RTL931X_LED_GLB_CTRL); } @@ -142,7 +58,6 @@ void __init plat_mem_setup(void) void *dtb; set_io_port_base(KSEG1); - _machine_restart = rtl838x_restart; if (fw_passed_dtb) /* UHI interface */ dtb = (void *)fw_passed_dtb; -- 2.30.2