From f85bc0d77d6106e1dfe96773656ff479ee0aefa1 Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Thu, 6 Aug 2020 19:13:01 +0200 Subject: [PATCH] Revert "add vfconfig" This reverts commit 34553e8cc9ad4530d3f52c3423e5c52fdacac539. This commit was not meant to go into master. Signed-off-by: Jo-Philipp Wich --- package/network/config/vfconfig/Makefile | 40 --- .../config/vfconfig/files/vfconfig.hotplug | 7 - .../config/vfconfig/files/vfconfig.include | 11 - .../network/config/vfconfig/files/vfconfig.sh | 234 ------------------ 4 files changed, 292 deletions(-) delete mode 100644 package/network/config/vfconfig/Makefile delete mode 100644 package/network/config/vfconfig/files/vfconfig.hotplug delete mode 100755 package/network/config/vfconfig/files/vfconfig.include delete mode 100755 package/network/config/vfconfig/files/vfconfig.sh diff --git a/package/network/config/vfconfig/Makefile b/package/network/config/vfconfig/Makefile deleted file mode 100644 index 1fb62d728f..0000000000 --- a/package/network/config/vfconfig/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -include $(TOPDIR)/rules.mk - -PKG_NAME:=vfconfig -PKG_RELEASE:=1 -PKG_LICENSE:=GPL-2.0 - -include $(INCLUDE_DIR)/package.mk - -define Package/vfconfig - SECTION:=net - CATEGORY:=Network - MAINTAINER:=Jo-Philipp Wich - TITLE:=UCI configuration support for VLAN filtering rules - DEPENDS:= +ip-bridge +ip-full - PKGARCH:=all -endef - -define Package/vfconfig/description - This package provides UCI configuration abstraction for VLAN filter rules - on top of Linux bridge interfaces. -endef - -define Build/Compile -endef - -define Build/Configure -endef - -define Package/vfconfig/install - $(INSTALL_DIR) $(1)/etc/hotplug.d/iface - $(INSTALL_DATA) ./files/vfconfig.hotplug $(1)/etc/hotplug.d/iface/01-vfconfig - - $(INSTALL_DIR) $(1)/lib/network - $(INSTALL_DATA) ./files/vfconfig.include $(1)/lib/network/vfconfig.sh - - $(INSTALL_DIR) $(1)/sbin - $(INSTALL_BIN) ./files/vfconfig.sh $(1)/sbin/vfconfig -endef - -$(eval $(call BuildPackage,vfconfig)) diff --git a/package/network/config/vfconfig/files/vfconfig.hotplug b/package/network/config/vfconfig/files/vfconfig.hotplug deleted file mode 100644 index fc2a489dea..0000000000 --- a/package/network/config/vfconfig/files/vfconfig.hotplug +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -if [ "$ACTION" = ifup ] && [ "$INTERFACE" = loopback ]; then - . /lib/network/dsaconfig.sh - setup_switch -fi - diff --git a/package/network/config/vfconfig/files/vfconfig.include b/package/network/config/vfconfig/files/vfconfig.include deleted file mode 100755 index 4ac11d8061..0000000000 --- a/package/network/config/vfconfig/files/vfconfig.include +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -setup_switch() { - # Skip switch setup on network restart. The netifd process - # will be started afterwards and remove all interfaces again... - if [ "$initscript" = /etc/init.d/network ] && [ "$action" = restart ]; then - return 0 - fi - - /sbin/dsaconfig apply 2>&1 | logger -t dsaconfig -} diff --git a/package/network/config/vfconfig/files/vfconfig.sh b/package/network/config/vfconfig/files/vfconfig.sh deleted file mode 100755 index 5a73c62b27..0000000000 --- a/package/network/config/vfconfig/files/vfconfig.sh +++ /dev/null @@ -1,234 +0,0 @@ -#!/bin/sh - -. /lib/functions.sh -. /lib/functions/network.sh - -bridge_names="" - -warn() { - echo "$@" >&2 -} - -clear_port_vlans() { - local port=$1 - local self=$2 - local vlans=$(bridge vlan show dev "$port" | sed -ne 's#^[^ ]* \+\([0-9]\+\).*$#\1#p') - - local vlan - for vlan in $vlans; do - bridge vlan del vid "$vlan" dev "$port" $self - done -} - -add_bridge() { - local cfg=$1 - local brname - - config_get brname "$cfg" bridge "switch0" - - case " $bridge_names " in - *" $brname "*) return 1 ;; - esac - - append bridge_names "$brname" - - export -n "bridge=$brname" -} - -validate_vid() { - local vid=$1 - - case "$vid" in - [1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-4][0-9][0-9][0-9]) - if [ $vid -gt 4096 ]; then - return 1 - fi - ;; - *) - return 1 - ;; - esac - - return 0 -} - -setup_bridge() { - local cfg=$1 - local bridge - - add_bridge "$cfg" || return 0 - - # Prevent netifd from picking up our switch bridge just yet - network_defer_device "$bridge" - - # (Re)create switch bridge device in case it is not yet set up - local filtering=$(cat "/sys/class/net/$bridge/bridge/vlan_filtering" 2>/dev/null) - if [ ${filtering:-0} != 1 ]; then - ip link set "$bridge" down 2>/dev/null - ip link delete dev "$bridge" 2>/dev/null - ip link add name "$bridge" type bridge - echo 1 > "/sys/class/net/$bridge/bridge/vlan_filtering" - fi - - ip link set "$bridge" up - - # Unbridge DSA ports and flush any VLAN filters on them, they're added back later - local port - for port in /sys/class/net/*"/upper_${cfg}"; do - if [ -e "$port" ]; then - port=${port%/upper_*} - port=${port##*/} - - ip link set "$port" nomaster - - # Unbridging the port should already clear VLANs, but be safe - clear_port_vlans "$port" - fi - done - - # Clear any VLANs on the switch bridge, they're added back later - clear_port_vlans "$bridge" self -} - -setup_bridge_vlan() { - local cfg=$1 - local bridge vlan ports - - config_get bridge "$cfg" bridge "switch0" - config_get vlan "$cfg" vlan - config_get ports "$cfg" ports - - validate_vid "$vlan" || { - warn "VLAN section '$cfg' specifies an invalid VLAN ID '$vlan'" - return 1 - } - - # Setup ports - local port tag pvid - for port in $ports; do - tag=untagged - pvid= - - case "$port" in - *"*") - pvid=pvid - port=${port%\*} - ;; - esac - - case "$port" in - *:u) - port=${port%:u} - ;; - *:t) - tag=tagged - port=${port%:t} - ;; - esac - - # Add the port to the switch bridge and delete the default - # VLAN 1 if it is not yet joined to the bridge. - if [ ! -e "/sys/class/net/$port/upper_$bridge" ]; then - ip link set dev "$port" up - ip link set dev "$port" master "$bridge" - - # Get rid of default VLAN 1 - bridge vlan del vid 1 dev "$port" - fi - - # Promote the first untagged VLAN of this port to the PVID - if [ "$tag" = untagged ] && ! bridge vlan show dev "$port" | grep -qi pvid; then - pvid=pvid - fi - - # Add VLAN filter entry for port - bridge vlan add dev "$port" vid $vlan $pvid $tag - done - - # Make the switch bridge itself handle the VLAN as well - bridge vlan add dev "$bridge" self vid $vlan tagged -} - -apply_config() { - config_load network - config_foreach setup_bridge vlan_filter - config_foreach setup_bridge_vlan vlan_filter - - # Ready switch bridge devices - local bridge - for bridge in $bridge_names; do - network_ready_device "$bridge" - done -} - -show_bridge() { - local cfg=$1 - local bridge - - add_bridge "$cfg" || return 0 - - printf "Bridge: %s\n" "$bridge" - printf "VLAN/" - - local port ports - for port in "/sys/class/net/$bridge/lower_"*; do - [ -e "$port" ] || continue - - port=${port##*/lower_} - - printf " | %-5s" "$port" - append ports "$port" - done - - printf " |\nLink:" - - for port in $ports; do - local carrier=$(cat "/sys/class/net/$port/carrier") - local duplex=$(cat "/sys/class/net/$port/duplex") - local speed=$(cat "/sys/class/net/$port/speed") - - if [ ${carrier:-0} -eq 0 ]; then - printf " | %-5s" "down" - else - [ "$duplex" = "full" ] && duplex=F || duplex=H - printf " | %4d%s" "$speed" "$duplex" - fi - done - - local vlans=$(bridge vlan show dev "$bridge" | sed -ne 's#^[^ ]* \+\([0-9]\+\).*$#\1#p') - local vlan - for vlan in $vlans; do - printf " |\n%4d " "$vlan" - - for port in $ports; do - local pvid="" utag="" word - for word in $(bridge vlan show dev "$port" vid "$vlan"); do - case "$word" in - PVID) pvid="*" ;; - "$vlan") utag="t" ;; - Untagged) utag="u" ;; - esac - done - - printf " | %-2s " "$utag$pvid" - done - done - - printf " |\n\n" -} - -show_config() { - config_load network - config_foreach show_bridge vlan_filter -} - - -case "$1" in - show) show_config ;; - apply) apply_config ;; - *) - echo "Usage: ${0##*/} show" - echo " ${0##*/} apply" - exit 1 - ;; -esac -- 2.30.2