From f8515f0639c337b6fac2f24073368ae834053a96 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 6 Sep 2012 20:27:09 +0530 Subject: [PATCH] usb: twl4030: Add device tree support for twl4030 usb Add device tree support for twl4030 usb driver. Update the Documentation with device tree binding information. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- .../devicetree/bindings/usb/twlxxxx-usb.txt | 19 ++++++++++++++ drivers/usb/otg/twl4030-usb.c | 26 ++++++++++++++----- 2 files changed, 39 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt index 930f9ff2952a..36b9aede3f40 100644 --- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt @@ -19,3 +19,22 @@ Board specific device node entry &twl6030-usb { usb-supply = <&vusb>; }; + +TWL4030 USB PHY AND COMPARATOR + - compatible : Should be "ti,twl4030-usb" + - interrupts : The interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts + and VBUS interrupts. The second interrupt number is optional. + - -supply : phandle to the regulator device tree node. + should be vusb1v5, vusb1v8 and vusb3v1 + - usb_mode : The mode used by the phy to connect to the controller. "1" + specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. + +twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = < 10 4 >; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; +}; diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 523cad5bfea9..f0d2e7530cfe 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -585,23 +585,28 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb *twl; int status, err; struct usb_otg *otg; - - if (!pdata) { - dev_dbg(&pdev->dev, "platform_data not available\n"); - return -EINVAL; - } + struct device_node *np = pdev->dev.of_node; twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); if (!twl) return -ENOMEM; + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) + twl->usb_mode = pdata->usb_mode; + else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); if (!otg) return -ENOMEM; twl->dev = &pdev->dev; twl->irq = platform_get_irq(pdev, 0); - twl->usb_mode = pdata->usb_mode; twl->vbus_supplied = false; twl->asleep = 1; twl->linkstat = OMAP_MUSB_UNKNOWN; @@ -690,12 +695,21 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + static struct platform_driver twl4030_usb_driver = { .probe = twl4030_usb_probe, .remove = __exit_p(twl4030_usb_remove), .driver = { .name = "twl4030_usb", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl4030_usb_id_table), }, }; -- 2.30.2