From f80d6472b47e73e35e4eaed6fc56ce5df2c82cdb Mon Sep 17 00:00:00 2001 From: York Sun Date: Thu, 11 Sep 2014 13:32:06 -0700 Subject: [PATCH] driver/ddr/fsl: Fix DDR4 driver When accumulated ECC is enabled, the DQ_MAP for ECC[4:7] needs to be set to 0, i.e. 0->0, 1->1, etc., required by controller logic, even these pins are not actually connected. Also fix a bug when reading from DDR register to use proper accessor for correct endianess. Signed-off-by: York Sun --- drivers/ddr/fsl/ctrl_regs.c | 9 +++++++-- drivers/ddr/fsl/fsl_ddr_gen4.c | 3 +-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index a5ef40f8f3..9a156bfd5e 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -1902,9 +1902,12 @@ static void set_timing_cfg_9(fsl_ddr_cfg_regs_t *ddr) debug("FSLDDR: timing_cfg_9 = 0x%08x\n", ddr->timing_cfg_9); } +/* This function needs to be called after set_ddr_sdram_cfg() is called */ static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr, const dimm_params_t *dimm_params) { + unsigned int acc_ecc_en = (ddr->ddr_sdram_cfg >> 2) & 0x1; + ddr->dq_map_0 = ((dimm_params->dq_mapping[0] & 0x3F) << 26) | ((dimm_params->dq_mapping[1] & 0x3F) << 20) | ((dimm_params->dq_mapping[2] & 0x3F) << 14) | @@ -1923,9 +1926,11 @@ static void set_ddr_dq_mapping(fsl_ddr_cfg_regs_t *ddr, ((dimm_params->dq_mapping[15] & 0x3F) << 8) | ((dimm_params->dq_mapping[16] & 0x3F) << 2); + /* dq_map for ECC[4:7] is set to 0 if accumulated ECC is enabled */ ddr->dq_map_3 = ((dimm_params->dq_mapping[17] & 0x3F) << 26) | ((dimm_params->dq_mapping[8] & 0x3F) << 20) | - ((dimm_params->dq_mapping[9] & 0x3F) << 14) | + (acc_ecc_en ? 0 : + (dimm_params->dq_mapping[9] & 0x3F) << 14) | dimm_params->dq_mapping_ors; debug("FSLDDR: dq_map_0 = 0x%08x\n", ddr->dq_map_0); @@ -2292,7 +2297,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if (ip_rev > 0x40400) unq_mrs_en = 1; - if (ip_rev > 0x40700) + if ((ip_rev > 0x40700) && (popts->cswl_override != 0)) ddr->debug[18] = popts->cswl_override; set_ddr_sdram_cfg_2(ddr, popts, unq_mrs_en); diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index bfc76b3485..e024db9ee2 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -216,7 +216,7 @@ step2: * For example, 2GB on 666MT/s 64-bit bus takes about 402ms * Let's wait for 800ms */ - bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + bus_width = 3 - ((ddr_in32(&ddr->sdram_cfg) & SDRAM_CFG_DBW_MASK) >> SDRAM_CFG_DBW_SHIFT); timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / (get_ddr_freq(0) >> 20)) << 2; @@ -233,5 +233,4 @@ step2: if (timeout <= 0) printf("Waiting for D_INIT timeout. Memory may not work.\n"); - } -- 2.30.2