From f7daed8b9a13578c5e8e5b15bfbd062139c851e3 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 10 Jun 2013 08:25:02 +0000 Subject: [PATCH] lantiq: diag.sh with both red and green power LEDs This provides a boot LED sequence suitable for devices with both red and green LEDs for power. This assumes no "default-on" settings in the device tree. Signed-off-by: Daniel Gimpelevich SVN-Revision: 36899 --- target/linux/lantiq/base-files/etc/diag.sh | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/target/linux/lantiq/base-files/etc/diag.sh b/target/linux/lantiq/base-files/etc/diag.sh index 9e0e1701cb..a6cb823581 100644 --- a/target/linux/lantiq/base-files/etc/diag.sh +++ b/target/linux/lantiq/base-files/etc/diag.sh @@ -6,6 +6,26 @@ status_led="power" set_state() { + [ -d /sys/class/leds/power2/ ] && { + + case "$1" in + preinit) + led_set_attr "power2" "trigger" "heartbeat" + ;; + init) + status_led_on + ;; + failsafe) + led_off "power2" + status_led_set_timer 100 100 + ;; + done) + led_off "power2" + ;; + esac + return + } + case "$1" in preinit) status_led_set_heartbeat -- 2.30.2