From f7c732bf9ed9bd09646a528681256fb7b0d80bfc Mon Sep 17 00:00:00 2001 From: Marius Durbaca Date: Wed, 28 Feb 2024 09:39:44 +0000 Subject: [PATCH] rockchip: add Radxa E25 board support Radxa E25 is a network application carrier board for the Radxa CM3 Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. It has the following features: - MicroSD card socket, on board eMMC flash - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver - 1x USB Type-C port (Power and Serial console) - 1x USB 3.0 OTG port - mini PCIe socket (USB or PCIe) - ngff PCIe socket (USB or SATA) - 1x User LED and 16x RGB LEDs - 26-pin expansion header Installation: Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: Marius Durbaca --- .../armv8/base-files/etc/board.d/02_network | 3 +- .../etc/hotplug.d/net/40-net-smp-affinity | 3 +- target/linux/rockchip/image/armv8.mk | 10 + ...rm64-dts-rockchip-Add-Radxa-CM3I-E25.patch | 689 ++++++++++++++++++ ....3-arm64-dts-rockchip-Update-eMMC-SD.patch | 48 ++ ...-arm64-dts-rockchip-Add-missing-CM3i.patch | 35 + ...Correct-the-model-name-for-Radxa-E25.patch | 28 + ...hip-Fix-PCIe-regulators-on-Radxa-E25.patch | 79 ++ ...ts-rockchip-Enable-SATA-on-Radxa-E25.patch | 41 ++ .../112-radxa-e25-add-led-aliases.patch | 24 + 10 files changed, 958 insertions(+), 2 deletions(-) create mode 100644 target/linux/rockchip/patches-6.1/024-v6.3-arm64-dts-rockchip-Add-Radxa-CM3I-E25.patch create mode 100644 target/linux/rockchip/patches-6.1/025-v6.3-arm64-dts-rockchip-Update-eMMC-SD.patch create mode 100644 target/linux/rockchip/patches-6.1/026-v6.3-arm64-dts-rockchip-Add-missing-CM3i.patch create mode 100644 target/linux/rockchip/patches-6.1/027-v6.3-arm64-dts-rockchip-Correct-the-model-name-for-Radxa-E25.patch create mode 100644 target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch create mode 100644 target/linux/rockchip/patches-6.1/029-v6.6-arm64-dts-rockchip-Enable-SATA-on-Radxa-E25.patch create mode 100644 target/linux/rockchip/patches-6.1/112-radxa-e25-add-led-aliases.patch diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network index f87b17dbc1b..d6e97b91fac 100644 --- a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network +++ b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network @@ -16,7 +16,8 @@ rockchip_setup_interfaces() xunlong,orangepi-r1-plus-lts) ucidef_set_interfaces_lan_wan 'eth1' 'eth0' ;; - friendlyarm,nanopi-r5c) + friendlyarm,nanopi-r5c|\ + radxa,e25) ucidef_set_interfaces_lan_wan 'eth0' 'eth1' ;; friendlyarm,nanopi-r5s) diff --git a/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity b/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity index 360b34ba912..5753d1e8560 100644 --- a/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity +++ b/target/linux/rockchip/armv8/base-files/etc/hotplug.d/net/40-net-smp-affinity @@ -43,7 +43,8 @@ friendlyarm,nanopi-r4s-enterprise) set_interface_core 10 "eth0" set_interface_core 20 "eth1" ;; -friendlyarm,nanopi-r5c) +friendlyarm,nanopi-r5c|\ +radxa,e25) set_interface_core 2 "eth0" set_interface_core 4 "eth1" ;; diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk index 251a9c17db2..d457058282f 100644 --- a/target/linux/rockchip/image/armv8.mk +++ b/target/linux/rockchip/image/armv8.mk @@ -104,6 +104,16 @@ define Device/radxa_cm3-io endef TARGET_DEVICES += radxa_cm3-io +define Device/radxa_e25 + DEVICE_VENDOR := Radxa + DEVICE_MODEL := E25 + SOC := rk3568 + DEVICE_DTS := rockchip/rk3568-radxa-e25 + UBOOT_DEVICE_NAME := radxa-e25-rk3568 + DEVICE_PACKAGES := kmod-r8169 kmod-ata-ahci-platform +endef +TARGET_DEVICES += radxa_e25 + define Device/radxa_rock-pi-4a DEVICE_VENDOR := Radxa DEVICE_MODEL := ROCK Pi 4A diff --git a/target/linux/rockchip/patches-6.1/024-v6.3-arm64-dts-rockchip-Add-Radxa-CM3I-E25.patch b/target/linux/rockchip/patches-6.1/024-v6.3-arm64-dts-rockchip-Add-Radxa-CM3I-E25.patch new file mode 100644 index 00000000000..354c546d7e0 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/024-v6.3-arm64-dts-rockchip-Add-Radxa-CM3I-E25.patch @@ -0,0 +1,689 @@ +From 2bf2f4d9f673013a58109626b87329310537a611 Mon Sep 17 00:00:00 2001 +From: Chukun Pan +Date: Fri, 9 Dec 2022 18:25:24 +0800 +Subject: [PATCH] arm64: dts: rockchip: Add Radxa CM3I E25 + +Radxa E25 is a network application carrier board for the Radxa CM3 +Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC. + +It has the following features: + +- MicroSD card socket, on board eMMC flash +- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver +- 1x USB Type-C port (Power and Serial console) +- 1x USB 3.0 OTG port +- mini PCIe socket (USB or PCIe) +- ngff PCIe socket (USB or SATA) +- 1x User LED and 16x RGB LEDs +- 26-pin expansion header + +Signed-off-by: Chukun Pan +Link: https://lore.kernel.org/r/20221209102524.129367-3-amadeus@jmu.edu.cn +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/Makefile | 1 + + .../boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 416 ++++++++++++++++++ + .../boot/dts/rockchip/rk3568-radxa-e25.dts | 229 ++++++++++ + 3 files changed, 646 insertions(+) + create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi + create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts + +--- a/arch/arm64/boot/dts/rockchip/Makefile ++++ b/arch/arm64/boot/dts/rockchip/Makefile +@@ -78,4 +78,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bp + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi +@@ -0,0 +1,416 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++#include ++#include ++#include ++#include "rk3568.dtsi" ++ ++/ { ++ model = "Radxa CM3 Industrial Board"; ++ compatible = "radxa,cm3i", "rockchip,rk3568"; ++ ++ aliases { ++ mmc0 = &sdhci; ++ }; ++ ++ chosen { ++ stdout-path = "serial2:115200n8"; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ led_user: led-0 { ++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; ++ function = LED_FUNCTION_HEARTBEAT; ++ color = ; ++ linux,default-trigger = "heartbeat"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_user_en>; ++ }; ++ }; ++ ++ pcie30_avdd0v9: pcie30-avdd0v9-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcie30_avdd0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ pcie30_avdd1v8: pcie30-avdd1v8-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcie30_avdd1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ vin-supply = <&vcc3v3_sys>; ++ }; ++ ++ vcc3v3_sys: vcc3v3-sys-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v_input>; ++ }; ++ ++ vcc5v0_sys: vcc5v0-sys-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v0_sys"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v_input>; ++ }; ++ ++ /* labeled +5v_input in schematic */ ++ vcc5v_input: vcc5v-input-regulator { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc5v_input"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++}; ++ ++&combphy0 { ++ status = "okay"; ++}; ++ ++&combphy1 { ++ status = "okay"; ++}; ++ ++&combphy2 { ++ status = "okay"; ++}; ++ ++&cpu0 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu1 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu2 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&cpu3 { ++ cpu-supply = <&vdd_cpu>; ++}; ++ ++&display_subsystem { ++ status = "disabled"; ++}; ++ ++&gpu { ++ mali-supply = <&vdd_gpu>; ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ vdd_cpu: regulator@1c { ++ compatible = "tcs,tcs4525"; ++ reg = <0x1c>; ++ fcs,suspend-voltage-selector = <1>; ++ regulator-name = "vdd_cpu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1150000>; ++ regulator-ramp-delay = <2300>; ++ vin-supply = <&vcc5v_input>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ rk809: pmic@20 { ++ compatible = "rockchip,rk809"; ++ reg = <0x20>; ++ interrupt-parent = <&gpio0>; ++ interrupts = ; ++ #clock-cells = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pmic_int>; ++ rockchip,system-power-controller; ++ wakeup-source; ++ ++ vcc1-supply = <&vcc3v3_sys>; ++ vcc2-supply = <&vcc3v3_sys>; ++ vcc3-supply = <&vcc3v3_sys>; ++ vcc4-supply = <&vcc3v3_sys>; ++ vcc5-supply = <&vcc3v3_sys>; ++ vcc6-supply = <&vcc3v3_sys>; ++ vcc7-supply = <&vcc3v3_sys>; ++ vcc8-supply = <&vcc3v3_sys>; ++ vcc9-supply = <&vcc3v3_sys>; ++ ++ regulators { ++ vdd_logic: DCDC_REG1 { ++ regulator-name = "vdd_logic"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-init-microvolt = <900000>; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdd_gpu: DCDC_REG2 { ++ regulator-name = "vdd_gpu"; ++ regulator-always-on; ++ regulator-init-microvolt = <900000>; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_ddr: DCDC_REG3 { ++ regulator-name = "vcc_ddr"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-initial-mode = <0x2>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ }; ++ }; ++ ++ vdd_npu: DCDC_REG4 { ++ regulator-name = "vdd_npu"; ++ regulator-init-microvolt = <900000>; ++ regulator-initial-mode = <0x2>; ++ regulator-min-microvolt = <500000>; ++ regulator-max-microvolt = <1350000>; ++ regulator-ramp-delay = <6001>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_1v8: DCDC_REG5 { ++ regulator-name = "vcc_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_image: LDO_REG1 { ++ regulator-name = "vdda0v9_image"; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda_0v9: LDO_REG2 { ++ regulator-name = "vdda_0v9"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vdda0v9_pmu: LDO_REG3 { ++ regulator-name = "vdda0v9_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <900000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <900000>; ++ }; ++ }; ++ ++ vccio_acodec: LDO_REG4 { ++ regulator-name = "vccio_acodec"; ++ regulator-always-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vccio_sd: LDO_REG5 { ++ regulator-name = "vccio_sd"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_pmu: LDO_REG6 { ++ regulator-name = "vcc3v3_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <3300000>; ++ }; ++ }; ++ ++ vcca_1v8: LDO_REG7 { ++ regulator-name = "vcca_1v8"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcca1v8_pmu: LDO_REG8 { ++ regulator-name = "vcca1v8_pmu"; ++ regulator-always-on; ++ regulator-boot-on; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-on-in-suspend; ++ regulator-suspend-microvolt = <1800000>; ++ }; ++ }; ++ ++ vcca1v8_image: LDO_REG9 { ++ regulator-name = "vcca1v8_image"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc_3v3: SWITCH_REG1 { ++ regulator-name = "vcc_3v3"; ++ regulator-always-on; ++ regulator-boot-on; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ ++ vcc3v3_sd: SWITCH_REG2 { ++ regulator-name = "vcc3v3_sd"; ++ ++ regulator-state-mem { ++ regulator-off-in-suspend; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pinctrl { ++ leds { ++ led_user_en: led_user_en { ++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ pmic { ++ pmic_int: pmic_int { ++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; ++ }; ++ }; ++}; ++ ++&pmu_io_domains { ++ pmuio1-supply = <&vcc3v3_pmu>; ++ pmuio2-supply = <&vcc3v3_pmu>; ++ vccio1-supply = <&vccio_acodec>; ++ vccio2-supply = <&vcc_1v8>; ++ vccio3-supply = <&vccio_sd>; ++ vccio4-supply = <&vcc_1v8>; ++ vccio5-supply = <&vcc_3v3>; ++ vccio6-supply = <&vcc_1v8>; ++ vccio7-supply = <&vcc_3v3>; ++ status = "okay"; ++}; ++ ++&saradc { ++ vref-supply = <&vcca_1v8>; ++ status = "okay"; ++}; ++ ++&sdhci { ++ bus-width = <8>; ++ max-frequency = <200000000>; ++ non-removable; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; ++ vmmc-supply = <&vcc_3v3>; ++ vqmmc-supply = <&vcc_1v8>; ++ status = "okay"; ++}; ++ ++&tsadc { ++ rockchip,hw-tshut-mode = <1>; ++ rockchip,hw-tshut-polarity = <0>; ++ status = "okay"; ++}; ++ ++&uart2 { ++ status = "okay"; ++}; ++ ++&usb2phy0 { ++ status = "okay"; ++}; ++ ++&usb2phy1 { ++ status = "okay"; ++}; ++ ++&usb_host0_xhci { ++ extcon = <&usb2phy0>; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -0,0 +1,229 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++ ++/dts-v1/; ++#include "rk3568-radxa-cm3i.dtsi" ++ ++/ { ++ model = "Radxa E25"; ++ compatible = "radxa,e25", "rockchip,rk3568"; ++ ++ aliases { ++ mmc0 = &sdmmc0; ++ mmc1 = &sdhci; ++ }; ++ ++ pwm-leds { ++ compatible = "pwm-leds-multicolor"; ++ ++ multi-led { ++ color = ; ++ max-brightness = <255>; ++ ++ led-red { ++ color = ; ++ pwms = <&pwm1 0 1000000 0>; ++ }; ++ ++ led-green { ++ color = ; ++ pwms = <&pwm2 0 1000000 0>; ++ }; ++ ++ led-blue { ++ color = ; ++ pwms = <&pwm12 0 1000000 0>; ++ }; ++ }; ++ }; ++ ++ vbus_typec: vbus-typec-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vbus_typec_en>; ++ regulator-name = "vbus_typec"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc3v3_minipcie: vcc3v3-minipcie-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&minipcie_enable_h>; ++ regulator-name = "vcc3v3_minipcie"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ vcc3v3_ngff: vcc3v3-ngff-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ngffpcie_enable_h>; ++ regulator-name = "vcc3v3_ngff"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++ ++ /* actually fed by vcc5v0_sys, dependent ++ * on pi6c clock generator ++ */ ++ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie30x1_enable_h>; ++ regulator-name = "vcc3v3_pcie30x1"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc3v3_pi6c_05>; ++ }; ++ ++ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { ++ compatible = "regulator-fixed"; ++ enable-active-high; ++ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie_enable_h>; ++ regulator-name = "vcc3v3_pcie"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc5v0_sys>; ++ }; ++}; ++ ++&pcie2x1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie20_reset_h>; ++ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc3v3_pi6c_05>; ++ status = "okay"; ++}; ++ ++&pcie30phy { ++ data-lanes = <1 2>; ++ status = "okay"; ++}; ++ ++&pcie3x1 { ++ num-lanes = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie30x1m0_pins>; ++ reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc3v3_pcie30x1>; ++ status = "okay"; ++}; ++ ++&pcie3x2 { ++ num-lanes = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pcie30x2_reset_h>; ++ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; ++ vpcie3v3-supply = <&vcc3v3_pi6c_05>; ++ status = "okay"; ++}; ++ ++&pinctrl { ++ pcie { ++ pcie20_reset_h: pcie20-reset-h { ++ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ pcie30x1_enable_h: pcie30x1-enable-h { ++ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ pcie30x2_reset_h: pcie30x2-reset-h { ++ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ pcie_enable_h: pcie-enable-h { ++ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ ++ usb { ++ minipcie_enable_h: minipcie-enable-h { ++ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ ngffpcie_enable_h: ngffpcie-enable-h { ++ rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ ++ vbus_typec_en: vbus_typec_en { ++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++}; ++ ++&pwm1 { ++ status = "okay"; ++}; ++ ++&pwm2 { ++ status = "okay"; ++}; ++ ++&pwm12 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pwm12m1_pins>; ++ status = "okay"; ++}; ++ ++&sdmmc0 { ++ bus-width = <4>; ++ cap-sd-highspeed; ++ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; ++ /* Also used in pcie30x1_clkreqnm0 */ ++ disable-wp; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>; ++ sd-uhs-sdr104; ++ vmmc-supply = <&vcc3v3_sd>; ++ vqmmc-supply = <&vccio_sd>; ++ status = "okay"; ++}; ++ ++&usb_host0_ehci { ++ status = "okay"; ++}; ++ ++&usb_host0_ohci { ++ status = "okay"; ++}; ++ ++&usb_host0_xhci { ++ status = "okay"; ++}; ++ ++&usb_host1_ehci { ++ status = "okay"; ++}; ++ ++&usb_host1_ohci { ++ status = "okay"; ++}; ++ ++&usb2phy0_otg { ++ phy-supply = <&vbus_typec>; ++ status = "okay"; ++}; ++ ++&usb2phy1_host { ++ phy-supply = <&vcc3v3_minipcie>; ++ status = "okay"; ++}; ++ ++&usb2phy1_otg { ++ phy-supply = <&vcc3v3_ngff>; ++ status = "okay"; ++}; diff --git a/target/linux/rockchip/patches-6.1/025-v6.3-arm64-dts-rockchip-Update-eMMC-SD.patch b/target/linux/rockchip/patches-6.1/025-v6.3-arm64-dts-rockchip-Update-eMMC-SD.patch new file mode 100644 index 00000000000..e556e2eb428 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/025-v6.3-arm64-dts-rockchip-Update-eMMC-SD.patch @@ -0,0 +1,48 @@ +From c80992abd2877590059e9cb254213c16824e2106 Mon Sep 17 00:00:00 2001 +From: Jagan Teki +Date: Wed, 18 Jan 2023 13:34:53 +0530 +Subject: [PATCH] arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM + boards + +Radxa has produced Compute Modules like RK3399pro VMARC and CM3i with +onboarding eMMC flash, so the eMMC is the primary MMC device. + +On the other hand, Rockchip boot orders start from eMMC from an MMC +device perspective. + +Mark, the eMMC has mmc0 to satisfy the above two conditions. + +Reported-by: FUKAUMI Naoki +Signed-off-by: Jagan Teki +Link: https://lore.kernel.org/r/20230118080454.11643-1-jagan@amarulasolutions.com +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 4 ++-- + arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 3 +-- + 2 files changed, 3 insertions(+), 4 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi ++++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +@@ -13,8 +13,8 @@ + compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + aliases { +- mmc0 = &sdmmc; +- mmc1 = &sdhci; ++ mmc0 = &sdhci; ++ mmc1 = &sdmmc; + }; + + vcc3v3_pcie: vcc-pcie-regulator { +--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -8,8 +8,7 @@ + compatible = "radxa,e25", "rockchip,rk3568"; + + aliases { +- mmc0 = &sdmmc0; +- mmc1 = &sdhci; ++ mmc1 = &sdmmc0; + }; + + pwm-leds { diff --git a/target/linux/rockchip/patches-6.1/026-v6.3-arm64-dts-rockchip-Add-missing-CM3i.patch b/target/linux/rockchip/patches-6.1/026-v6.3-arm64-dts-rockchip-Add-missing-CM3i.patch new file mode 100644 index 00000000000..c1f1a09219a --- /dev/null +++ b/target/linux/rockchip/patches-6.1/026-v6.3-arm64-dts-rockchip-Add-missing-CM3i.patch @@ -0,0 +1,35 @@ +From c4d2b02d63ee38b381fbc886c02eecfec4f981cc Mon Sep 17 00:00:00 2001 +From: Jagan Teki +Date: Mon, 23 Jan 2023 12:46:51 +0530 +Subject: [PATCH] arm64: dts: rockchip: Add missing CM3i fallback compatible + for Radxa E25 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +In order to function the Radxa E25 Carrier board, it is mandatory to +mount the Radxa CM3i module.  + +Add Radxa CM3i compatible as fallback compatible to string to satisfy +the Module and Carrier board topology. + +Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25") +Cc: Chukun Pan +Signed-off-by: Jagan Teki +Link: https://lore.kernel.org/r/20230123071654.73139-2-jagan@amarulasolutions.com +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -5,7 +5,7 @@ + + / { + model = "Radxa E25"; +- compatible = "radxa,e25", "rockchip,rk3568"; ++ compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; + + aliases { + mmc1 = &sdmmc0; diff --git a/target/linux/rockchip/patches-6.1/027-v6.3-arm64-dts-rockchip-Correct-the-model-name-for-Radxa-E25.patch b/target/linux/rockchip/patches-6.1/027-v6.3-arm64-dts-rockchip-Correct-the-model-name-for-Radxa-E25.patch new file mode 100644 index 00000000000..84e87bae054 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/027-v6.3-arm64-dts-rockchip-Correct-the-model-name-for-Radxa-E25.patch @@ -0,0 +1,28 @@ +From ef9134d9bbce071c9e4ebdcbb6f8fb1a5dd0a67e Mon Sep 17 00:00:00 2001 +From: Jagan Teki +Date: Mon, 23 Jan 2023 12:46:53 +0530 +Subject: [PATCH] arm64: dts: rockchip: Correct the model name for Radxa E25 + +Radxa E25 is a Carrier board, so update the model name for Radxa E25 +as suggested by the Radxa website. + +Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25") +Cc: Chukun Pan +Signed-off-by: Jagan Teki +Link: https://lore.kernel.org/r/20230123071654.73139-4-jagan@amarulasolutions.com +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -4,7 +4,7 @@ + #include "rk3568-radxa-cm3i.dtsi" + + / { +- model = "Radxa E25"; ++ model = "Radxa E25 Carrier Board"; + compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568"; + + aliases { diff --git a/target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch b/target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch new file mode 100644 index 00000000000..da02c4c0015 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/028-v6.6-arm64-dts-rockchip-Fix-PCIe-regulators-on-Radxa-E25.patch @@ -0,0 +1,79 @@ +From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Mon, 24 Jul 2023 14:52:16 +0000 +Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25 + +Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with +pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as +seen on page 8 of the schematic [1]. + +pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the +vcc3v3_minipcie regulator is instead related to pcie30x1. + +The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives. + +Use correct regulator vcc3v3_minipcie for pcie30x1. + +[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf + +Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25") +Signed-off-by: Jonas Karlman +Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se +Signed-off-by: Heiko Stuebner +--- + .../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -47,6 +47,9 @@ + vin-supply = <&vcc5v0_sys>; + }; + ++ /* actually fed by vcc5v0_sys, dependent ++ * on pi6c clock generator ++ */ + vcc3v3_minipcie: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; +@@ -54,9 +57,9 @@ + pinctrl-names = "default"; + pinctrl-0 = <&minipcie_enable_h>; + regulator-name = "vcc3v3_minipcie"; +- regulator-min-microvolt = <5000000>; +- regulator-max-microvolt = <5000000>; +- vin-supply = <&vcc5v0_sys>; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ vin-supply = <&vcc3v3_pi6c_05>; + }; + + vcc3v3_ngff: vcc3v3-ngff-regulator { +@@ -71,9 +74,6 @@ + vin-supply = <&vcc5v0_sys>; + }; + +- /* actually fed by vcc5v0_sys, dependent +- * on pi6c clock generator +- */ + vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator { + compatible = "regulator-fixed"; + enable-active-high; +@@ -83,7 +83,7 @@ + regulator-name = "vcc3v3_pcie30x1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +- vin-supply = <&vcc3v3_pi6c_05>; ++ vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator { +@@ -117,7 +117,7 @@ + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x1m0_pins>; + reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; +- vpcie3v3-supply = <&vcc3v3_pcie30x1>; ++ vpcie3v3-supply = <&vcc3v3_minipcie>; + status = "okay"; + }; + diff --git a/target/linux/rockchip/patches-6.1/029-v6.6-arm64-dts-rockchip-Enable-SATA-on-Radxa-E25.patch b/target/linux/rockchip/patches-6.1/029-v6.6-arm64-dts-rockchip-Enable-SATA-on-Radxa-E25.patch new file mode 100644 index 00000000000..c0abdeb2679 --- /dev/null +++ b/target/linux/rockchip/patches-6.1/029-v6.6-arm64-dts-rockchip-Enable-SATA-on-Radxa-E25.patch @@ -0,0 +1,41 @@ +From 2bdfe84fbd57a4ed9fd65a67210442559ce078f0 Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Mon, 24 Jul 2023 14:52:16 +0000 +Subject: [PATCH] arm64: dts: rockchip: Enable SATA on Radxa E25 + +The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives. + +Enable sata1 node to fix use of SATA drives on the M.2 slot. + +Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25") +Signed-off-by: Jonas Karlman +Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -99,6 +99,10 @@ + }; + }; + ++&combphy1 { ++ phy-supply = <&vcc3v3_pcie30x1>; ++}; ++ + &pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_reset_h>; +@@ -178,6 +182,10 @@ + status = "okay"; + }; + ++&sata1 { ++ status = "okay"; ++}; ++ + &sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; diff --git a/target/linux/rockchip/patches-6.1/112-radxa-e25-add-led-aliases.patch b/target/linux/rockchip/patches-6.1/112-radxa-e25-add-led-aliases.patch new file mode 100644 index 00000000000..75038c7f39f --- /dev/null +++ b/target/linux/rockchip/patches-6.1/112-radxa-e25-add-led-aliases.patch @@ -0,0 +1,24 @@ +From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From: Marius Durbaca +Date: Tue Feb 27 16:25:27 2024 +0200 +Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa +E25 + +Add OpenWrt's LED aliases for showing system status. + +Signed-off-by: Marius Durbaca +--- + +--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts +@@ -9,6 +9,10 @@ + + aliases { + mmc1 = &sdmmc0; ++ led-boot = &led_user; ++ led-failsafe = &led_user; ++ led-running = &led_user; ++ led-upgrade = &led_user; + }; + + pwm-leds { -- 2.30.2