From f79a023f411882d160df57b45709a7652e8c241e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 28 Mar 2014 08:30:58 +0100 Subject: [PATCH] arm: mx5: Fix memory slowness on MX53QSB Fix memory access slowness on i.MX53 MX53QSB board. Let us inspect the issue: First of all, the i.MX53 CPU has two memory banks mapped at 0x7000_0000 and 0xb000_0000 and each of those can hold up to 1GiB of DRAM memory. Notice that the memory area is not continuous. On MX53QSB, each of the banks contain 512MiB of DRAM, which makes a total of 1GiB of memory available to the system. The problem is how the relocation of U-Boot is treated on i.MX53 . The U-Boot is placed at the ((start of first DRAM partition) + (gd->ram_size)) . This in turn poses a problem, since in our case, the gd->ram_size is 1GiB, the first DRAM bank starts at 0x7000_0000 and contains 512MiB of memory. Thus, with this algorithm, U-Boot is placed at offset: 0x7000_0000 + 1GiB - sizeof(u-boot and some small margin) This is past the DRAM available in the first bank on MX53QSB, but is still within the address range of the first DRAM bank. Because of the memory wrap-around, the data can still be read and written to this area, but the access is much slower. There were two ideas how to solve this problem, first was to map both of the available DRAM chunks next to one another by using MMU, second was to define CONFIG_VERY_BIG_RAM and CONFIG_MAX_MEM_MAPPED to size of the memory in the first DRAM bank. We choose the later because it turns out the former is not applicable afterall. The former cannot be used in case Linux kernel was loaded into the second DRAM bank area, which would be remapped and one would try booting the kernel, since at some point before the kernel is started, the MMU would be turned off, which would destroy the mapping and hang the system. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Stefano Babic Cc: Wolfgang Denk --- include/configs/mx53loco.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 77f8567705..5bbac0dfd8 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -198,6 +198,8 @@ #define PHYS_SDRAM_2 CSD1_BASE_ADDR #define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) #define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) +#define CONFIG_VERY_BIG_RAM +#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_1_SIZE #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -- 2.30.2