From f544ff6656fca263ed1ebe39899b6d95da67c8b8 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Sat, 5 May 2007 08:29:01 +0200 Subject: [PATCH] ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big for the 4k NAND boot image so define bus_frequency to 133MHz here which is save for the refresh counter setup. Signed-off-by: Stefan Roese --- board/amcc/sequoia/sdram.c | 10 +++++++++- nand_spl/board/amcc/sequoia/Makefile | 6 +----- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index f8b837ed28..d045df1872 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -371,6 +371,14 @@ void denali_core_search_data_eye(unsigned long memory_size) } #endif /* CONFIG_DDR_DATA_EYE */ +#if defined(CONFIG_NAND_SPL) +/* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big + * for the 4k NAND boot image so define bus_frequency to 133MHz here + * which is save for the refresh counter setup. + */ +#define get_bus_freq(val) 133000000 +#endif + /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core @@ -404,7 +412,7 @@ long int initdram (int board_type) mtsdram(DDR0_22, 0x00267F0B); mtsdram(DDR0_23, 0x00000000); mtsdram(DDR0_24, 0x01010002); - if (speed > 133333333) + if (speed > 133333334) mtsdram(DDR0_26, 0x5B26050C); else mtsdram(DDR0_26, 0x5B260408); diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index 510999db03..b42da8cf68 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -30,7 +30,7 @@ AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL SOBJS = start.o init.o resetvec.o -COBJS = nand_boot.o ndfc.o sdram.o speed.o +COBJS = nand_boot.o ndfc.o sdram.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -69,10 +69,6 @@ $(obj)start.S: @rm -f $(obj)start.S ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S -$(obj)speed.c: - @rm -f $(obj)speed.c - ln -s $(SRCTREE)/cpu/ppc4xx/speed.c $(obj)speed.c - # from board directory $(obj)init.S: @rm -f $(obj)init.S -- 2.30.2