From f4bd8abb3733c6d7de84953abee89d909a1fa23c Mon Sep 17 00:00:00 2001 From: Richard Bytheway Date: Thu, 12 Feb 2009 15:36:37 -0800 Subject: [PATCH] Staging: comedi: add cb_pcimdas driver For Measurement Computing PCI Migration series boards From: Richard Bytheway Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/cb_pcimdas.c | 484 ++++++++++++++++++++ 1 file changed, 484 insertions(+) create mode 100644 drivers/staging/comedi/drivers/cb_pcimdas.c diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c new file mode 100644 index 000000000000..b95b3b157424 --- /dev/null +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -0,0 +1,484 @@ +/* + comedi/drivers/cb_pcimdas.c + Comedi driver for Computer Boards PCIM-DAS1602/16 + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 2000 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +/* +Driver: cb_pcimdas +Description: Measurement Computing PCI Migration series boards +Devices: [ComputerBoards] PCIM-DAS1602/16 (cb_pcimdas) +Author: Richard Bytheway +Updated: Wed, 13 Nov 2002 12:34:56 +0000 +Status: experimental + +Written to support the PCIM-DAS1602/16 on a 2.4 series kernel. + +Configuration Options: + [0] - PCI bus number + [1] - PCI slot number + +Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org). +Only supports DIO, AO and simple AI in it's present form. +No interrupts, multi channel or FIFO AI, although the card looks like it could support this. +See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. +*/ + +#include "../comedidev.h" + +#include + +#include "comedi_pci.h" +#include "plx9052.h" +#include "8255.h" + +//#define CBPCIMDAS_DEBUG +#undef CBPCIMDAS_DEBUG + +/* Registers for the PCIM-DAS1602/16 */ + +// sizes of io regions (bytes) +#define BADR0_SIZE 2 //?? +#define BADR1_SIZE 4 +#define BADR2_SIZE 6 +#define BADR3_SIZE 16 +#define BADR4_SIZE 4 + +//DAC Offsets +#define ADC_TRIG 0 +#define DAC0_OFFSET 2 +#define DAC1_OFFSET 4 + +//AI and Counter Constants +#define MUX_LIMITS 0 +#define MAIN_CONN_DIO 1 +#define ADC_STAT 2 +#define ADC_CONV_STAT 3 +#define ADC_INT 4 +#define ADC_PACER 5 +#define BURST_MODE 6 +#define PROG_GAIN 7 +#define CLK8254_1_DATA 8 +#define CLK8254_2_DATA 9 +#define CLK8254_3_DATA 10 +#define CLK8254_CONTROL 11 +#define USER_COUNTER 12 +#define RESID_COUNT_H 13 +#define RESID_COUNT_L 14 + +/* Board description */ +typedef struct cb_pcimdas_board_struct { + const char *name; + unsigned short device_id; + int ai_se_chans; // Inputs in single-ended mode + int ai_diff_chans; // Inputs in differential mode + int ai_bits; // analog input resolution + int ai_speed; // fastest conversion period in ns + int ao_nchan; // number of analog out channels + int ao_bits; // analogue output resolution + int has_ao_fifo; // analog output has fifo + int ao_scan_speed; // analog output speed for 1602 series (for a scan, not conversion) + int fifo_size; // number of samples fifo can hold + int dio_bits; // number of dio bits + int has_dio; // has DIO + const comedi_lrange *ranges; +} cb_pcimdas_board; + +static const cb_pcimdas_board cb_pcimdas_boards[] = { + { + name: "PCIM-DAS1602/16", + device_id:0x56, + ai_se_chans:16, + ai_diff_chans:8, + ai_bits: 16, + ai_speed:10000, //?? + ao_nchan:2, + ao_bits: 12, + has_ao_fifo:0, //?? + ao_scan_speed:10000, + //?? + fifo_size:1024, + dio_bits:24, + has_dio: 1, +// ranges: &cb_pcimdas_ranges, + }, +}; + +/* This is used by modprobe to translate PCI IDs to drivers. Should + * only be used for PCI and ISA-PnP devices */ +static DEFINE_PCI_DEVICE_TABLE(cb_pcimdas_pci_table) = { + {PCI_VENDOR_ID_COMPUTERBOARDS, 0x0056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, cb_pcimdas_pci_table); + +#define N_BOARDS 1 // Max number of boards supported + +/* + * Useful for shorthand access to the particular board structure + */ +#define thisboard ((const cb_pcimdas_board *)dev->board_ptr) + +/* this structure is for data unique to this hardware driver. If + several hardware drivers keep similar information in this structure, + feel free to suggest moving the variable to the comedi_device struct. */ +typedef struct { + int data; + + // would be useful for a PCI device + struct pci_dev *pci_dev; + + //base addresses + unsigned long BADR0; + unsigned long BADR1; + unsigned long BADR2; + unsigned long BADR3; + unsigned long BADR4; + + /* Used for AO readback */ + lsampl_t ao_readback[2]; + + // Used for DIO + unsigned short int port_a; // copy of BADR4+0 + unsigned short int port_b; // copy of BADR4+1 + unsigned short int port_c; // copy of BADR4+2 + unsigned short int dio_mode; // copy of BADR4+3 + +} cb_pcimdas_private; + +/* + * most drivers define the following macro to make it easy to + * access the private structure. + */ +#define devpriv ((cb_pcimdas_private *)dev->private) + +/* + * The comedi_driver structure tells the Comedi core module + * which functions to call to configure/deconfigure (attach/detach) + * the board, and also about the kernel module that contains + * the device code. + */ +static int cb_pcimdas_attach(comedi_device * dev, comedi_devconfig * it); +static int cb_pcimdas_detach(comedi_device * dev); +static comedi_driver driver_cb_pcimdas = { + driver_name:"cb_pcimdas", + module:THIS_MODULE, + attach:cb_pcimdas_attach, + detach:cb_pcimdas_detach, +}; + +static int cb_pcimdas_ai_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcimdas_ao_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); +static int cb_pcimdas_ao_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data); + +/* + * Attach is called by the Comedi core to configure the driver + * for a particular board. If you specified a board_name array + * in the driver structure, dev->board_ptr contains that + * address. + */ +static int cb_pcimdas_attach(comedi_device * dev, comedi_devconfig * it) +{ + comedi_subdevice *s; + struct pci_dev *pcidev; + int index; + //int i; + + printk("comedi%d: cb_pcimdas: ", dev->minor); + +/* + * Allocate the private structure area. + */ + if (alloc_private(dev, sizeof(cb_pcimdas_private)) < 0) + return -ENOMEM; + +/* + * Probe the device to determine what device in the series it is. + */ + printk("\n"); + + for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pcidev != NULL; + pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) { + // is it not a computer boards card? + if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS) + continue; + // loop through cards supported by this driver + for (index = 0; index < N_BOARDS; index++) { + if (cb_pcimdas_boards[index].device_id != + pcidev->device) + continue; + // was a particular bus/slot requested? + if (it->options[0] || it->options[1]) { + // are we on the wrong bus/slot? + if (pcidev->bus->number != it->options[0] || + PCI_SLOT(pcidev->devfn) != + it->options[1]) { + continue; + } + } + devpriv->pci_dev = pcidev; + dev->board_ptr = cb_pcimdas_boards + index; + goto found; + } + } + + printk("No supported ComputerBoards/MeasurementComputing card found on " + "requested position\n"); + return -EIO; + + found: + + printk("Found %s on bus %i, slot %i\n", cb_pcimdas_boards[index].name, + pcidev->bus->number, PCI_SLOT(pcidev->devfn)); + + // Warn about non-tested features + switch (thisboard->device_id) { + case 0x56: + break; + default: + printk("THIS CARD IS UNSUPPORTED.\n" + "PLEASE REPORT USAGE TO \n"); + }; + + if (comedi_pci_enable(pcidev, "cb_pcimdas")) { + printk(" Failed to enable PCI device and request regions\n"); + return -EIO; + } + + devpriv->BADR0 = pci_resource_start(devpriv->pci_dev, 0); + devpriv->BADR1 = pci_resource_start(devpriv->pci_dev, 1); + devpriv->BADR2 = pci_resource_start(devpriv->pci_dev, 2); + devpriv->BADR3 = pci_resource_start(devpriv->pci_dev, 3); + devpriv->BADR4 = pci_resource_start(devpriv->pci_dev, 4); + +#ifdef CBPCIMDAS_DEBUG + printk("devpriv->BADR0 = 0x%lx\n", devpriv->BADR0); + printk("devpriv->BADR1 = 0x%lx\n", devpriv->BADR1); + printk("devpriv->BADR2 = 0x%lx\n", devpriv->BADR2); + printk("devpriv->BADR3 = 0x%lx\n", devpriv->BADR3); + printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4); +#endif + +// Dont support IRQ yet +// // get irq +// if(comedi_request_irq(devpriv->pci_dev->irq, cb_pcimdas_interrupt, IRQF_SHARED, "cb_pcimdas", dev )) +// { +// printk(" unable to allocate irq %u\n", devpriv->pci_dev->irq); +// return -EINVAL; +// } +// dev->irq = devpriv->pci_dev->irq; + + //Initialize dev->board_name + dev->board_name = thisboard->name; + +/* + * Allocate the subdevice structures. alloc_subdevice() is a + * convenient macro defined in comedidev.h. + */ + if (alloc_subdevices(dev, 3) < 0) + return -ENOMEM; + + s = dev->subdevices + 0; + //dev->read_subdev=s; + // analog input subdevice + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND; + s->n_chan = thisboard->ai_se_chans; + s->maxdata = (1 << thisboard->ai_bits) - 1; + s->range_table = &range_unknown; + s->len_chanlist = 1; // This is the maximum chanlist length that + // the board can handle + s->insn_read = cb_pcimdas_ai_rinsn; + + s = dev->subdevices + 1; + // analog output subdevice + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = thisboard->ao_nchan; + s->maxdata = 1 << thisboard->ao_bits; + s->range_table = &range_unknown; //ranges are hardware settable, but not software readable. + s->insn_write = &cb_pcimdas_ao_winsn; + s->insn_read = &cb_pcimdas_ao_rinsn; + + s = dev->subdevices + 2; + /* digital i/o subdevice */ + if (thisboard->has_dio) { + subdev_8255_init(dev, s, NULL, devpriv->BADR4); + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + printk("attached\n"); + + return 1; +} + +/* + * _detach is called to deconfigure a device. It should deallocate + * resources. + * This function is also called when _attach() fails, so it should be + * careful not to release resources that were not necessarily + * allocated by _attach(). dev->private and dev->subdevices are + * deallocated automatically by the core. + */ +static int cb_pcimdas_detach(comedi_device * dev) +{ +#ifdef CBPCIMDAS_DEBUG + if (devpriv) { + printk("devpriv->BADR0 = 0x%lx\n", devpriv->BADR0); + printk("devpriv->BADR1 = 0x%lx\n", devpriv->BADR1); + printk("devpriv->BADR2 = 0x%lx\n", devpriv->BADR2); + printk("devpriv->BADR3 = 0x%lx\n", devpriv->BADR3); + printk("devpriv->BADR4 = 0x%lx\n", devpriv->BADR4); + } +#endif + printk("comedi%d: cb_pcimdas: remove\n", dev->minor); + if (dev->irq) + comedi_free_irq(dev->irq, dev); + if (devpriv) { + if (devpriv->pci_dev) { + if (devpriv->BADR0) { + comedi_pci_disable(devpriv->pci_dev); + } + pci_dev_put(devpriv->pci_dev); + } + } + + return 0; +} + +/* + * "instructions" read/write data in "one-shot" or "software-triggered" + * mode. + */ +static int cb_pcimdas_ai_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int n, i; + unsigned int d; + unsigned int busy; + int chan = CR_CHAN(insn->chanspec); + unsigned short chanlims; + int maxchans; + + // only support sw initiated reads from a single channel + + //check channel number + if ((inb(devpriv->BADR3 + 2) & 0x20) == 0) //differential mode + maxchans = thisboard->ai_diff_chans; + else + maxchans = thisboard->ai_se_chans; + + if (chan > (maxchans - 1)) + return -ETIMEDOUT; //*** Wrong error code. Fixme. + + //configure for sw initiated read + d = inb(devpriv->BADR3 + 5); + if ((d & 0x03) > 0) { //only reset if needed. + d = d & 0xfd; + outb(d, devpriv->BADR3 + 5); + } + outb(0x01, devpriv->BADR3 + 6); //set bursting off, conversions on + outb(0x00, devpriv->BADR3 + 7); //set range to 10V. UP/BP is controlled by a switch on the board + + // write channel limits to multiplexer, set Low (bits 0-3) and High (bits 4-7) channels to chan. + chanlims = chan | (chan << 4); + outb(chanlims, devpriv->BADR3 + 0); + + /* convert n samples */ + for (n = 0; n < insn->n; n++) { + /* trigger conversion */ + outw(0, devpriv->BADR2 + 0); + +#define TIMEOUT 1000 //typically takes 5 loops on a lightly loaded Pentium 100MHz, + //this is likely to be 100 loops on a 2GHz machine, so set 1000 as the limit. + + /* wait for conversion to end */ + for (i = 0; i < TIMEOUT; i++) { + busy = inb(devpriv->BADR3 + 2) & 0x80; + if (!busy) + break; + } + if (i == TIMEOUT) { + printk("timeout\n"); + return -ETIMEDOUT; + } + /* read data */ + d = inw(devpriv->BADR2 + 0); + + /* mangle the data as necessary */ + //d ^= 1<<(thisboard->ai_bits-1); // 16 bit data from ADC, so no mangle needed. + + data[n] = d; + } + + /* return the number of samples read/written */ + return n; +} + +static int cb_pcimdas_ao_winsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + + /* Writing a list of values to an AO channel is probably not + * very useful, but that's how the interface is defined. */ + for (i = 0; i < insn->n; i++) { + switch (chan) { + case 0: + outw(data[i] & 0x0FFF, devpriv->BADR2 + DAC0_OFFSET); + break; + case 1: + outw(data[i] & 0x0FFF, devpriv->BADR2 + DAC1_OFFSET); + break; + default: + return -1; + } + devpriv->ao_readback[chan] = data[i]; + } + + /* return the number of samples read/written */ + return i; +} + +/* AO subdevices should have a read insn as well as a write insn. + * Usually this means copying a value stored in devpriv. */ +static int cb_pcimdas_ao_rinsn(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + + for (i = 0; i < insn->n; i++) + data[i] = devpriv->ao_readback[chan]; + + return i; +} + +/* + * A convenient macro that defines init_module() and cleanup_module(), + * as necessary. + */ +COMEDI_PCI_INITCLEANUP(driver_cb_pcimdas, cb_pcimdas_pci_table); -- 2.30.2