From f48d8f235a9e3d2331b25743807340fc65b86587 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Thu, 20 Sep 2012 18:36:04 -0300 Subject: [PATCH] drm/i915: extract set_m_n from ironlake_crtc_mode_set The set_m_n code was spread all over the mode_set function. Version 2: Don't set the DP M/N registers on ironlake_set_m_n. Daniel Vetter has plans to add some encoder-specific callbacks. Also, on this version we don't change the order we're writing the registers, making the code change safer. Signed-off-by: Paulo Zanoni Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 131 ++++++++++++++++----------- 1 file changed, 79 insertions(+), 52 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 1458563913f3..e92c6d329137 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4707,6 +4707,82 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, return true; } +static void ironlake_set_m_n(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + enum pipe pipe = intel_crtc->pipe; + struct intel_encoder *intel_encoder, *edp_encoder = NULL; + struct fdi_m_n m_n = {0}; + int target_clock, pixel_multiplier, lane, link_bw; + bool is_dp = false, is_cpu_edp = false; + + for_each_encoder_on_crtc(dev, crtc, intel_encoder) { + switch (intel_encoder->type) { + case INTEL_OUTPUT_DISPLAYPORT: + is_dp = true; + break; + case INTEL_OUTPUT_EDP: + is_dp = true; + if (!intel_encoder_is_pch_edp(&intel_encoder->base)) + is_cpu_edp = true; + edp_encoder = intel_encoder; + break; + } + } + + /* FDI link */ + pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); + lane = 0; + /* CPU eDP doesn't require FDI link, so just set DP M/N + according to current link config */ + if (is_cpu_edp) { + intel_edp_link_config(edp_encoder, &lane, &link_bw); + } else { + /* FDI is a binary signal running at ~2.7GHz, encoding + * each output octet as 10 bits. The actual frequency + * is stored as a divider into a 100MHz clock, and the + * mode pixel clock is stored in units of 1KHz. + * Hence the bw of each lane in terms of the mode signal + * is: + */ + link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; + } + + /* [e]DP over FDI requires target mode clock instead of link clock. */ + if (edp_encoder) + target_clock = intel_edp_target_clock(edp_encoder, mode); + else if (is_dp) + target_clock = mode->clock; + else + target_clock = adjusted_mode->clock; + + if (!lane) { + /* + * Account for spread spectrum to avoid + * oversubscribing the link. Max center spread + * is 2.5%; use 5% for safety's sake. + */ + u32 bps = target_clock * intel_crtc->bpp * 21 / 20; + lane = bps / (link_bw * 8) + 1; + } + + intel_crtc->fdi_lanes = lane; + + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; + ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, + &m_n); + + I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); + I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); + I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); + I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); +} + static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -4723,11 +4799,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, u32 dpll, fp = 0, fp2 = 0; bool ok, has_reduced_clock = false, is_sdvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; - struct intel_encoder *encoder, *edp_encoder = NULL; - int ret; - struct fdi_m_n m_n = {0}; + struct intel_encoder *encoder; u32 temp; - int target_clock, pixel_multiplier, lane, link_bw, factor; + int ret, factor; bool dither; bool is_cpu_edp = false, is_pch_edp = false; @@ -4757,7 +4831,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, is_pch_edp = true; else is_cpu_edp = true; - edp_encoder = encoder; break; } @@ -4774,54 +4847,11 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); - /* FDI link */ - pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); - lane = 0; - /* CPU eDP doesn't require FDI link, so just set DP M/N - according to current link config */ - if (is_cpu_edp) { - intel_edp_link_config(edp_encoder, &lane, &link_bw); - } else { - /* FDI is a binary signal running at ~2.7GHz, encoding - * each output octet as 10 bits. The actual frequency - * is stored as a divider into a 100MHz clock, and the - * mode pixel clock is stored in units of 1KHz. - * Hence the bw of each lane in terms of the mode signal - * is: - */ - link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; - } - - /* [e]DP over FDI requires target mode clock instead of link clock. */ - if (edp_encoder) - target_clock = intel_edp_target_clock(edp_encoder, mode); - else if (is_dp) - target_clock = mode->clock; - else - target_clock = adjusted_mode->clock; - /* determine panel color depth */ dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode); if (is_lvds && dev_priv->lvds_dither) dither = true; - if (!lane) { - /* - * Account for spread spectrum to avoid - * oversubscribing the link. Max center spread - * is 2.5%; use 5% for safety's sake. - */ - u32 bps = target_clock * intel_crtc->bpp * 21 / 20; - lane = bps / (link_bw * 8) + 1; - } - - intel_crtc->fdi_lanes = lane; - - if (pixel_multiplier > 1) - link_bw *= pixel_multiplier; - ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, - &m_n); - fp = clock.n << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | @@ -5018,10 +5048,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); - I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); - I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); - I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); - I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); + ironlake_set_m_n(crtc, mode, adjusted_mode); if (is_cpu_edp) ironlake_set_pll_edp(crtc, adjusted_mode->clock); -- 2.30.2