From f488b72de5bb2f380c157135922bac3ca1648564 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 22 May 2009 21:19:40 +0200 Subject: [PATCH] net/libertas: make SPI interface big endian aware The comment (which I remove) says that the translation is done SPI routines. IMHO this can't work because the SPI driver does not know whether the incomming bytes are part of the registers/bytes which need to be flipped or part of packet data which has to remain untouched. While adding le helpers I also removed spu_write_u32() which has no users. Tested-by: Andrey Yurovsky Signed-off-by: Sebastian Andrzej Siewior Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_spi.c | 34 ++++++++++++-------------- 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 5fa55fe1f860..ea23c5de1420 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -119,9 +119,6 @@ static struct chip_ident chip_id_to_device_name[] = { * First we have to put a SPU register name on the bus. Then we can * either read from or write to that register. * - * For 16-bit transactions, byte order on the bus is big-endian. - * We don't have to worry about that here, though. - * The translation takes place in the SPI routines. */ static void spu_transaction_init(struct if_spi_card *card) @@ -147,7 +144,7 @@ static void spu_transaction_finish(struct if_spi_card *card) static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) { int err = 0; - u16 reg_out = reg | IF_SPI_WRITE_OPERATION_MASK; + u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); /* You must give an even number of bytes to the SPU, even if it * doesn't care about the last one. */ @@ -169,16 +166,10 @@ out: static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val) { - return spu_write(card, reg, (u8 *)&val, sizeof(u16)); -} + u16 buff; -static inline int spu_write_u32(struct if_spi_card *card, u16 reg, u32 val) -{ - /* The lower 16 bits are written first. */ - u16 out[2]; - out[0] = val & 0xffff; - out[1] = (val & 0xffff0000) >> 16; - return spu_write(card, reg, (u8 *)&out, sizeof(u32)); + buff = cpu_to_le16(val); + return spu_write(card, reg, (u8 *)&buff, sizeof(u16)); } static inline int spu_reg_is_port_reg(u16 reg) @@ -198,7 +189,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) unsigned int i, delay; int err = 0; u16 zero = 0; - u16 reg_out = reg | IF_SPI_READ_OPERATION_MASK; + u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); /* You must take an even number of bytes from the SPU, even if you * don't care about the last one. */ @@ -236,18 +227,25 @@ out: /* Read 16 bits from an SPI register */ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) { - return spu_read(card, reg, (u8 *)val, sizeof(u16)); + u16 buf; + int ret; + + ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); + if (ret == 0) + *val = le16_to_cpup(&buf); + return ret; } /* Read 32 bits from an SPI register. * The low 16 bits are read first. */ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) { - u16 buf[2]; + u32 buf; int err; - err = spu_read(card, reg, (u8 *)buf, sizeof(u32)); + + err = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); if (!err) - *val = buf[0] | (buf[1] << 16); + *val = le32_to_cpup(&buf); return err; } -- 2.30.2