From f3a9749f8d5ce80e4d588b424d36aa60cbf40091 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Apr 2009 16:05:57 +0200 Subject: [PATCH] Staging: rt2870: remove WPA_SUPPLICANT_SUPPORT ifdefs Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2870/Makefile | 1 - drivers/staging/rt2870/common/cmm_wpa.c | 2 - drivers/staging/rt2870/common/mlme.c | 2 - drivers/staging/rt2870/common/rtmp_init.c | 3 -- drivers/staging/rt2870/oid.h | 2 +- drivers/staging/rt2870/rt2870.h | 7 --- drivers/staging/rt2870/rt_config.h | 4 -- drivers/staging/rt2870/rt_profile.c | 2 - drivers/staging/rt2870/rtmp.h | 4 -- drivers/staging/rt2870/sta/connect.c | 10 +---- drivers/staging/rt2870/sta/rtmp_data.c | 10 ----- drivers/staging/rt2870/sta/wpa.c | 3 -- drivers/staging/rt2870/sta_ioctl.c | 52 +---------------------- 13 files changed, 5 insertions(+), 97 deletions(-) diff --git a/drivers/staging/rt2870/Makefile b/drivers/staging/rt2870/Makefile index de79796d2ba7..31ed4802294e 100644 --- a/drivers/staging/rt2870/Makefile +++ b/drivers/staging/rt2870/Makefile @@ -5,7 +5,6 @@ EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT EXTRA_CFLAGS += -DRT2870 EXTRA_CFLAGS += -DDBG EXTRA_CFLAGS += -DDOT11_N_SUPPORT -EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT rt2870sta-objs := \ common/md5.o \ diff --git a/drivers/staging/rt2870/common/cmm_wpa.c b/drivers/staging/rt2870/common/cmm_wpa.c index 076568e0c265..c9a6f842e2be 100644 --- a/drivers/staging/rt2870/common/cmm_wpa.c +++ b/drivers/staging/rt2870/common/cmm_wpa.c @@ -625,14 +625,12 @@ VOID RTMPMakeRSNIE( { IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { if (AuthMode < Ndis802_11AuthModeWPA) return; } else -#endif // WPA_SUPPLICANT_SUPPORT // { // Support WPAPSK or WPA2PSK in STA-Infra mode // Support WPANone in STA-Adhoc mode diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c index f669e8501c1b..b8e9db559b7b 100644 --- a/drivers/staging/rt2870/common/mlme.c +++ b/drivers/staging/rt2870/common/mlme.c @@ -939,9 +939,7 @@ VOID STAMlmePeriodicExec( ULONG TxTotalCnt; int i; -#ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE) -#endif // WPA_SUPPLICANT_SUPPORT // { // WPA MIC error should block association attempt for 60 seconds if (pAd->StaCfg.bBlockAssoc && (pAd->StaCfg.LastMicErrorTime + (60 * OS_HZ) < pAd->Mlme.Now32)) diff --git a/drivers/staging/rt2870/common/rtmp_init.c b/drivers/staging/rt2870/common/rtmp_init.c index 06cc2a14c887..27cbb4793276 100644 --- a/drivers/staging/rt2870/common/rtmp_init.c +++ b/drivers/staging/rt2870/common/rtmp_init.c @@ -3316,13 +3316,10 @@ VOID UserCfgInit( NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1); sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME); RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE); -#ifdef WPA_SUPPLICANT_SUPPORT pAd->StaCfg.IEEE8021X = FALSE; pAd->StaCfg.IEEE8021x_required_keys = FALSE; pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE; pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE; -#endif // WPA_SUPPLICANT_SUPPORT // - } // Default for extra information is not valid diff --git a/drivers/staging/rt2870/oid.h b/drivers/staging/rt2870/oid.h index 5c392b2a4f54..cdd9c1935816 100644 --- a/drivers/staging/rt2870/oid.h +++ b/drivers/staging/rt2870/oid.h @@ -157,7 +157,7 @@ #define RT_OID_802_11_QUERY_LAST_RX_RATE 0x0613 #define RT_OID_802_11_TX_POWER_LEVEL_1 0x0614 #define RT_OID_802_11_QUERY_PIDVID 0x0615 -//for WPA_SUPPLICANT_SUPPORT + #define OID_SET_COUNTERMEASURES 0x0616 #define OID_802_11_SET_IEEE8021X 0x0617 #define OID_802_11_SET_IEEE8021X_REQUIRE_KEY 0x0618 diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index 39f66c3243b1..d6c0595423db 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -608,13 +608,6 @@ typedef struct _CmdQ { UINT32 CmdQState; }CmdQ, *PCmdQ; -// -// For WPA SUPPLICANT: WIRELESS EXT support wireless events: v14 or newer -// -#if WIRELESS_EXT >= 14 -//#define WPA_SUPPLICANT_SUPPORT 1 -#endif - /* oid.h */ // Cipher suite type for mixed mode group cipher, P802.11i-2004 typedef enum _RT_802_11_CIPHER_SUITE_TYPE { diff --git a/drivers/staging/rt2870/rt_config.h b/drivers/staging/rt2870/rt_config.h index 90b1d19302b6..09e76759f889 100644 --- a/drivers/staging/rt2870/rt_config.h +++ b/drivers/staging/rt2870/rt_config.h @@ -67,10 +67,6 @@ #include "igmp_snoop.h" #endif // IGMP_SNOOP_SUPPORT // -#ifndef WPA_SUPPLICANT_SUPPORT -#error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y" -#endif // WPA_SUPPLICANT_SUPPORT // - #ifdef IKANOS_VX_1X0 #include "vr_ikans.h" #endif // IKANOS_VX_1X0 // diff --git a/drivers/staging/rt2870/rt_profile.c b/drivers/staging/rt2870/rt_profile.c index c96db98242f1..99e2364c96d8 100644 --- a/drivers/staging/rt2870/rt_profile.c +++ b/drivers/staging/rt2870/rt_profile.c @@ -1277,12 +1277,10 @@ NDIS_STATUS RTMPReadParametersHook( pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPANone; else if ((strcmp(tmpbuf, "WPA2PSK") == 0) || (strcmp(tmpbuf, "wpa2psk") == 0)) pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK; -#ifdef WPA_SUPPLICANT_SUPPORT else if ((strcmp(tmpbuf, "WPA") == 0) || (strcmp(tmpbuf, "wpa") == 0)) pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA; else if ((strcmp(tmpbuf, "WPA2") == 0) || (strcmp(tmpbuf, "wpa2") == 0)) pAd->StaCfg.AuthMode = Ndis802_11AuthModeWPA2; -#endif // WPA_SUPPLICANT_SUPPORT // else pAd->StaCfg.AuthMode = Ndis802_11AuthModeOpen; diff --git a/drivers/staging/rt2870/rtmp.h b/drivers/staging/rt2870/rtmp.h index 331ebeb4924f..7bb226f0e79b 100644 --- a/drivers/staging/rt2870/rtmp.h +++ b/drivers/staging/rt2870/rtmp.h @@ -1949,7 +1949,6 @@ typedef struct _STA_ADMIN_CONFIG { BOOLEAN bFastRoaming; // 0:disable fast roaming, 1:enable fast roaming CHAR dBmToRoam; // the condition to roam when receiving Rssi less than this value. It's negative value. -#ifdef WPA_SUPPLICANT_SUPPORT BOOLEAN IEEE8021X; BOOLEAN IEEE8021x_required_keys; CIPHER_KEY DesireSharedKey[4]; // Record user desired WEP keys @@ -1960,7 +1959,6 @@ typedef struct _STA_ADMIN_CONFIG { // 2: driver takes care of scanning, AP selection, and IEEE 802.11 association parameters UCHAR WpaSupplicantUP; UCHAR WpaSupplicantScanCount; -#endif // WPA_SUPPLICANT_SUPPORT // CHAR dev_name[16]; USHORT OriDevType; @@ -5851,7 +5849,6 @@ VOID QueryBATABLE( OUT PQUERYBA_TABLE pBAT); #endif // DOT11_N_SUPPORT // -#ifdef WPA_SUPPLICANT_SUPPORT INT WpaCheckEapCode( IN PRTMP_ADAPTER pAd, IN PUCHAR pFrame, @@ -5864,7 +5861,6 @@ VOID WpaSendMicFailureToWpaSupplicant( VOID SendAssocIEsToWpaSupplicant( IN PRTMP_ADAPTER pAd); -#endif // WPA_SUPPLICANT_SUPPORT // int wext_notify_event_assoc( IN RTMP_ADAPTER *pAd); diff --git a/drivers/staging/rt2870/sta/connect.c b/drivers/staging/rt2870/sta/connect.c index d0784be65e43..b06c5c137de4 100644 --- a/drivers/staging/rt2870/sta/connect.c +++ b/drivers/staging/rt2870/sta/connect.c @@ -260,9 +260,8 @@ VOID CntlIdleProc( DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid, REASON_DISASSOC_STA_LEAVING); MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ, sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq); pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC; -#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_ENABLE_WITH_WEB_UI) -#endif // WPA_SUPPLICANT_SUPPORT // { // Set the AutoReconnectSsid to prevent it reconnect to old SSID // Since calling this indicate user don't want to connect to that SSID anymore. @@ -1479,15 +1478,11 @@ VOID LinkUp( // If WEP is enabled, add paiewise and shared key -#ifdef WPA_SUPPLICANT_SUPPORT if (((pAd->StaCfg.WpaSupplicantUP)&& (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled)&& (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) || ((pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)&& (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled))) -#else - if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) -#endif // WPA_SUPPLICANT_SUPPORT // { PUCHAR Key; UCHAR CipherAlg; @@ -1915,7 +1910,7 @@ VOID LinkDown( } // 802.1x port control -#ifdef WPA_SUPPLICANT_SUPPORT + // Prevent clear PortSecured here with static WEP // NetworkManger set security policy first then set SSID to connect AP. if (pAd->StaCfg.WpaSupplicantUP && @@ -1925,7 +1920,6 @@ VOID LinkDown( pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; } else -#endif // WPA_SUPPLICANT_SUPPORT // { pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED; pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP; diff --git a/drivers/staging/rt2870/sta/rtmp_data.c b/drivers/staging/rt2870/sta/rtmp_data.c index b7c10975f18e..45b6c4768b3f 100644 --- a/drivers/staging/rt2870/sta/rtmp_data.c +++ b/drivers/staging/rt2870/sta/rtmp_data.c @@ -49,7 +49,6 @@ VOID STARxEAPOLFrameIndicate( PRXWI_STRUC pRxWI = pRxBlk->pRxWI; UCHAR *pTmpBuf; -#ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP) { // All EAPoL frames have to pass to upper layer (ex. WPA_SUPPLICANT daemon) @@ -115,7 +114,6 @@ VOID STARxEAPOLFrameIndicate( } } else -#endif // WPA_SUPPLICANT_SUPPORT // { // Special DATA frame that has to pass to MLME // 1. Cisco Aironet frames for CCX2. We need pass it to MLME for special process @@ -235,13 +233,11 @@ BOOLEAN STACheckTkipMICValue( { DBGPRINT_RAW(RT_DEBUG_ERROR,("Rx MIC Value error 2\n")); -#ifdef WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP) { WpaSendMicFailureToWpaSupplicant(pAd, (pWpaKey->Type == PAIRWISEKEY) ? TRUE : FALSE); } else -#endif // WPA_SUPPLICANT_SUPPORT // { RTMPReportMicError(pAd, pWpaKey); } @@ -961,9 +957,7 @@ NDIS_STATUS STASendPacket( (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) -#ifdef WPA_SUPPLICANT_SUPPORT || (pAd->StaCfg.IEEE8021X == TRUE) -#endif // WPA_SUPPLICANT_SUPPORT // ) && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2)) && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE) @@ -1218,9 +1212,7 @@ VOID RTMPSendNullFrame( (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) -#ifdef WPA_SUPPLICANT_SUPPORT || (pAd->StaCfg.IEEE8021X == TRUE) -#endif ) && (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)) { @@ -1341,13 +1333,11 @@ VOID STAFindCipherAlgorithm( CipherAlg = CIPHER_NONE; else if ((Cipher == Ndis802_11EncryptionDisabled) || (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 0)) CipherAlg = CIPHER_NONE; -#ifdef WPA_SUPPLICANT_SUPPORT else if ( pAd->StaCfg.WpaSupplicantUP && (Cipher == Ndis802_11Encryption1Enabled) && (pAd->StaCfg.IEEE8021X == TRUE) && (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)) CipherAlg = CIPHER_NONE; -#endif // WPA_SUPPLICANT_SUPPORT // else { //Header_802_11.FC.Wep = 1; diff --git a/drivers/staging/rt2870/sta/wpa.c b/drivers/staging/rt2870/sta/wpa.c index 8626dcde6054..61d8cb948573 100644 --- a/drivers/staging/rt2870/sta/wpa.c +++ b/drivers/staging/rt2870/sta/wpa.c @@ -1928,8 +1928,6 @@ VOID RTMPReportMicError( } } - -#ifdef WPA_SUPPLICANT_SUPPORT #define LENGTH_EAP_H 4 // If the received frame is EAP-Packet ,find out its EAP-Code (Request(0x01), Response(0x02), Success(0x03), Failure(0x04)). INT WpaCheckEapCode( @@ -1970,7 +1968,6 @@ VOID WpaSendMicFailureToWpaSupplicant( return; } -#endif // WPA_SUPPLICANT_SUPPORT // VOID WpaMicFailureReportFrame( IN PRTMP_ADAPTER pAd, diff --git a/drivers/staging/rt2870/sta_ioctl.c b/drivers/staging/rt2870/sta_ioctl.c index 4d8aae9b62b4..d02488a6a291 100644 --- a/drivers/staging/rt2870/sta_ioctl.c +++ b/drivers/staging/rt2870/sta_ioctl.c @@ -163,11 +163,9 @@ INT Set_PSMode_Proc( IN PRTMP_ADAPTER pAdapter, IN PUCHAR arg); -#ifdef WPA_SUPPLICANT_SUPPORT INT Set_Wpa_Support( IN PRTMP_ADAPTER pAd, IN PUCHAR arg); -#endif // WPA_SUPPLICANT_SUPPORT // #ifdef DBG VOID RTMPIoctlBBP( @@ -264,13 +262,7 @@ static struct { #ifdef DBG {"Debug", Set_Debug_Proc}, #endif - -#ifdef WPA_SUPPLICANT_SUPPORT {"WpaSupport", Set_Wpa_Support}, -#endif // WPA_SUPPLICANT_SUPPORT // - - - {"FixedTxMode", Set_FixedTxMode_Proc}, #ifdef DOT11_N_SUPPORT {"TGnWifiTest", Set_TGnWifiTest_Proc}, @@ -305,14 +297,13 @@ VOID RTMPAddKey( NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY)); pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAd->SharedKey[BSS0][0].Key, pKey->KeyMaterial, LEN_TKIP_EK); -#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) { NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); } else -#endif // WPA_SUPPLICANT_SUPPORT // { NdisMoveMemory(pAd->SharedKey[BSS0][0].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][0].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); @@ -366,14 +357,13 @@ VOID RTMPAddKey( NdisZeroMemory(&pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId], sizeof(CIPHER_KEY)); pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, pKey->KeyMaterial, LEN_TKIP_EK); -#ifdef WPA_SUPPLICANT_SUPPORT + if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled) { NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); } else -#endif // WPA_SUPPLICANT_SUPPORT // { NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].TxMic, pKey->KeyMaterial + LEN_TKIP_EK, LEN_TKIP_TXMICK); NdisMoveMemory(pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].RxMic, pKey->KeyMaterial + LEN_TKIP_EK + LEN_TKIP_TXMICK, LEN_TKIP_RXMICK); @@ -854,14 +844,12 @@ int rt_ioctl_giwap(struct net_device *dev, ap_addr->sa_family = ARPHRD_ETHER; memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN); } -#ifdef WPA_SUPPLICANT_SUPPORT // Add for RT2870 else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN); } -#endif // WPA_SUPPLICANT_SUPPORT // else { DBGPRINT(RT_DEBUG_TRACE, ("IOCTL::SIOCGIWAP(=EMPTY)\n")); @@ -970,12 +958,10 @@ int rt_ioctl_siwscan(struct net_device *dev, } -#ifdef WPA_SUPPLICANT_SUPPORT if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) { pAdapter->StaCfg.WpaSupplicantScanCount++; } -#endif // WPA_SUPPLICANT_SUPPORT // pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; if (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) @@ -983,7 +969,6 @@ int rt_ioctl_siwscan(struct net_device *dev, do{ Now = jiffies; -#ifdef WPA_SUPPLICANT_SUPPORT if ((pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) && (pAdapter->StaCfg.WpaSupplicantScanCount > 3)) { @@ -991,7 +976,6 @@ int rt_ioctl_siwscan(struct net_device *dev, Status = NDIS_STATUS_SUCCESS; break; } -#endif // WPA_SUPPLICANT_SUPPORT // if ((OPSTATUS_TEST_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED)) && ((pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA) || @@ -1051,13 +1035,10 @@ int rt_ioctl_giwscan(struct net_device *dev, return -EAGAIN; } - -#ifdef WPA_SUPPLICANT_SUPPORT if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) { pAdapter->StaCfg.WpaSupplicantScanCount = 0; } -#endif // WPA_SUPPLICANT_SUPPORT // if (pAdapter->ScanTab.BssNr == 0) { @@ -1398,14 +1379,12 @@ int rt_ioctl_giwessid(struct net_device *dev, memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen); } #ifdef RT2870 -#ifdef WPA_SUPPLICANT_SUPPORT // Add for RT2870 else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { data->length = pAdapter->CommonCfg.SsidLen; memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen); } -#endif // WPA_SUPPLICANT_SUPPORT // #endif // RT2870 // else {//the ANY ssid was specified @@ -1901,10 +1880,7 @@ rt_private_get_statistics(struct net_device *dev, struct iw_request_info *info, sprintf(extra+strlen(extra), "RSSI-B (if available) = %ld\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi1 - pAd->BbpRssiToDbmDelta)); sprintf(extra+strlen(extra), "RSSI-C (if available) = %ld\n\n", (LONG)(pAd->StaCfg.RssiSample.LastRssi2 - pAd->BbpRssiToDbmDelta)); } -#ifdef WPA_SUPPLICANT_SUPPORT sprintf(extra+strlen(extra), "WpaSupplicantUP = %d\n\n", pAd->StaCfg.WpaSupplicantUP); -#endif // WPA_SUPPLICANT_SUPPORT // - wrq->length = strlen(extra) + 1; // 1: size of '\0' DBGPRINT(RT_DEBUG_TRACE, ("<== rt_private_get_statistics, wrq->length = %d\n", wrq->length)); @@ -2216,9 +2192,7 @@ int rt_ioctl_siwauth(struct net_device *dev, pAdapter->StaCfg.WepStatus = Ndis802_11WEPEnabled; pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus; pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled; -#ifdef WPA_SUPPLICANT_SUPPORT pAdapter->StaCfg.IEEE8021X = FALSE; -#endif // WPA_SUPPLICANT_SUPPORT // } else if (param->value == IW_AUTH_CIPHER_TKIP) { @@ -2260,22 +2234,16 @@ int rt_ioctl_siwauth(struct net_device *dev, if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) { pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA; -#ifdef WPA_SUPPLICANT_SUPPORT pAdapter->StaCfg.IEEE8021X = FALSE; -#endif // WPA_SUPPLICANT_SUPPORT // } else if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) { pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2; -#ifdef WPA_SUPPLICANT_SUPPORT pAdapter->StaCfg.IEEE8021X = FALSE; -#endif // WPA_SUPPLICANT_SUPPORT // } -#ifdef WPA_SUPPLICANT_SUPPORT else // WEP 1x pAdapter->StaCfg.IEEE8021X = TRUE; -#endif // WPA_SUPPLICANT_SUPPORT // } else if (param->value == 0) { @@ -3140,12 +3108,10 @@ INT RTMPSetInformation( #ifdef DOT11_N_SUPPORT OID_SET_HT_PHYMODE HT_PhyMode; //11n ,kathy #endif // DOT11_N_SUPPORT // -#ifdef WPA_SUPPLICANT_SUPPORT PNDIS_802_11_PMKID pPmkId = NULL; BOOLEAN IEEE8021xState = FALSE; BOOLEAN IEEE8021x_required_keys = FALSE; UCHAR wpa_supplicant_enable = 0; -#endif // WPA_SUPPLICANT_SUPPORT // #ifdef DOT11_N_SUPPORT MaxPhyMode = PHY_11N_5G; @@ -4090,18 +4056,15 @@ INT RTMPSetInformation( // Default key for tx (shared key) if (pWepKey->KeyIndex & 0x80000000) { -#ifdef WPA_SUPPLICANT_SUPPORT // set key material and key length NdisZeroMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, 16); pAdapter->StaCfg.DesireSharedKey[KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength; NdisMoveMemory(pAdapter->StaCfg.DesireSharedKey[KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength); pAdapter->StaCfg.DesireSharedKeyId = KeyIdx; pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg; -#endif // WPA_SUPPLICANT_SUPPORT // pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx; } -#ifdef WPA_SUPPLICANT_SUPPORT if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) && (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) { @@ -4119,7 +4082,6 @@ INT RTMPSetInformation( pAdapter->IndicateMediaState = NdisMediaStateConnected; } else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) -#endif // WPA_SUPPLICANT_SUPPORT { Key = pAdapter->SharedKey[BSS0][KeyIdx].Key; @@ -4140,7 +4102,6 @@ INT RTMPSetInformation( } kfree(pWepKey); break; -#ifdef WPA_SUPPLICANT_SUPPORT case OID_SET_COUNTERMEASURES: if (wrq->u.data.length != sizeof(int)) Status = -EINVAL; @@ -4274,8 +4235,6 @@ INT RTMPSetInformation( if(pPmkId) kfree(pPmkId); break; -#endif // WPA_SUPPLICANT_SUPPORT // - default: DBGPRINT(RT_DEBUG_TRACE, ("Set::unknown IOCTL's subcmd = 0x%08x\n", cmd)); Status = -EOPNOTSUPP; @@ -4811,7 +4770,6 @@ INT RTMPQueryInformation( Status = copy_to_user(wrq->u.data.pointer, &pAdapter->CommonCfg.bWmmCapable, wrq->u.data.length); DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_QUERY_WMM (=%d)\n", pAdapter->CommonCfg.bWmmCapable)); break; -#ifdef WPA_SUPPLICANT_SUPPORT case RT_OID_NEW_DRIVER: { UCHAR enabled = 1; @@ -4825,8 +4783,6 @@ INT RTMPQueryInformation( Status = copy_to_user(wrq->u.data.pointer, &pAdapter->StaCfg.WpaSupplicantUP, wrq->u.data.length); DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_WPA_SUPPLICANT_SUPPORT (=%d)\n", pAdapter->StaCfg.WpaSupplicantUP)); break; -#endif // WPA_SUPPLICANT_SUPPORT // - case RT_OID_DRIVER_DEVICE_NAME: DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_DRIVER_DEVICE_NAME \n")); wrq->u.data.length = 16; @@ -5510,12 +5466,10 @@ INT Set_AuthMode_Proc( pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPANone; else if ((strcmp(arg, "WPA2PSK") == 0) || (strcmp(arg, "wpa2psk") == 0)) pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2PSK; -#ifdef WPA_SUPPLICANT_SUPPORT else if ((strcmp(arg, "WPA") == 0) || (strcmp(arg, "wpa") == 0)) pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA; else if ((strcmp(arg, "WPA2") == 0) || (strcmp(arg, "wpa2") == 0)) pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeWPA2; -#endif // WPA_SUPPLICANT_SUPPORT // else return FALSE; @@ -6057,7 +6011,6 @@ INT Set_PSMode_Proc( return TRUE; } -#ifdef WPA_SUPPLICANT_SUPPORT /* ========================================================================== Description: @@ -6088,7 +6041,6 @@ INT Set_Wpa_Support( return TRUE; } -#endif // WPA_SUPPLICANT_SUPPORT // #ifdef DBG /* -- 2.30.2