From f369788894a483f9e703b13c0841ee0069eed758 Mon Sep 17 00:00:00 2001 From: Pascal PAILLET-LME Date: Tue, 19 Feb 2019 10:04:33 +0000 Subject: [PATCH] dt-bindings: regulator: remove regulator pull-down support for stpmic1 Regulator high pull down are enabled by default so remove support in the driver. Signed-off-by: Pascal Paillet Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/st,stpmic1-regulator.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt index de27897d3f3a..bf9385b11da6 100644 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -23,8 +23,6 @@ Switches are fixed voltage regulators with only enable/disable capability. Optional properties: - st,mask-reset: mask reset for this regulator: the regulator configuration is maintained during pmic reset. -- regulator-pull-down: enable high pull down - if not specified light pull down is used - regulator-over-current-protection: if set, all regulators are switched off in case of over-current detection on this regulator, -- 2.30.2