From f1f5465782a96201798ef1e8167ed3ffaefdb30d Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 20 Feb 2009 02:32:30 +0100 Subject: [PATCH] [ARM] mv78xx0: enable eth2/eth3 on the mv78xx0 A0 development board The A0 revision of the mv78xx0 development board has four ethernet ports, with PHY IDs 8-11, whereas the Z0 version has two, with PHY addresses 8-9. This patch configures the third and fourth ethernet port to use the PHY addresses on the A0 board to enable use of those ports -- if we are running on a Z0 board, the ge10/11 setup code in common.c will force these back to PHYless mode. Signed-off-by: Lennert Buytenhek --- arch/arm/mach-mv78xx0/db78x00-bp-setup.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 2e285bbb7bbd..be0a59a6139e 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -28,15 +28,11 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = { }; static struct mv643xx_eth_platform_data db78x00_ge10_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, + .phy_addr = MV643XX_ETH_PHY_ADDR(10), }; static struct mv643xx_eth_platform_data db78x00_ge11_data = { - .phy_addr = MV643XX_ETH_PHY_NONE, - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, + .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; static struct mv_sata_platform_data db78x00_sata_data = { -- 2.30.2