From efcc08cededa2168b96f12a22a5872340880d334 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 11 Oct 2008 22:51:05 -0400 Subject: [PATCH] Blackfin: add support for SST SPI flashes Signed-off-by: Mike Frysinger --- board/bf537-stamp/spi_flash.c | 107 +++++++++++++++++++++++++--------- 1 file changed, 78 insertions(+), 29 deletions(-) diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c index 797daf222d..a3368943cd 100644 --- a/board/bf537-stamp/spi_flash.c +++ b/board/bf537-stamp/spi_flash.c @@ -59,6 +59,15 @@ static struct flash_info flash_st_serial_flash[] = { { NULL, 0, 0, 0 } }; +/* SPI Speeds: 20 MHz / 40 MHz */ +static struct flash_info flash_sst_serial_flash[] = { + { "SST25WF512", 0x2501, 4 * 1024, 128 }, + { "SST25WF010", 0x2502, 4 * 1024, 256 }, + { "SST25WF020", 0x2503, 4 * 1024, 512 }, + { "SST25WF040", 0x2504, 4 * 1024, 1024 }, + { NULL, 0, 0, 0 } +}; + /* SPI Speeds: 66 MHz / 33 MHz */ static struct flash_info flash_atmel_dataflash[] = { { "AT45DB011x", 0x0c, 264, 512 }, @@ -98,6 +107,13 @@ static struct flash_ops flash_st_ops = { .status = 0x05, }; +static struct flash_ops flash_sst_ops = { + .read = OP_READ, + .write = 0x02, + .erase = 0x20, + .status = 0x05, +}; + static struct flash_ops flash_atmel_ops = { .read = OP_READ, .write = 0x82, @@ -131,6 +147,7 @@ static struct { enum { JED_MANU_SPANSION = 0x01, JED_MANU_ST = 0x20, + JED_MANU_SST = 0xBF, JED_MANU_ATMEL = 0x1F, JED_MANU_WINBOND = 0xEF, }; @@ -148,6 +165,12 @@ static struct manufacturer_info flash_manufacturers[] = { .flashes = flash_st_serial_flash, .ops = &flash_st_ops, }, + { + .name = "SST", + .id = JED_MANU_SST, + .flashes = flash_sst_serial_flash, + .ops = &flash_sst_ops, + }, { .name = "Atmel", .id = JED_MANU_ATMEL, @@ -276,6 +299,7 @@ static int wait_for_ready_status(void) switch (flash.manufacturer_id) { case JED_MANU_SPANSION: case JED_MANU_ST: + case JED_MANU_SST: case JED_MANU_WINBOND: if (!(read_status_register() & 0x01)) return 0; @@ -297,6 +321,50 @@ static int wait_for_ready_status(void) return -1; } +static int enable_writing(void) +{ + ulong start; + + if (flash.manufacturer_id == JED_MANU_ATMEL) + return 0; + + /* A write enable instruction must previously have been executed */ + SPI_ON(); + spi_write_read_byte(0x06); + SPI_OFF(); + + /* The status register will be polled to check the write enable latch "WREN" */ + start = get_timer(0); + while (get_timer(0) - start < TIMEOUT) { + if (read_status_register() & 0x02) + return 0; + + if (ctrlc()) { + puts("\nAbort\n"); + return -1; + } + } + + puts("Timeout\n"); + return -1; +} + +static void write_status_register(uint8_t val) +{ + if (flash.manufacturer_id != JED_MANU_SST) + hang(); + + if (enable_writing()) + return; + + /* send instruction to write status register */ + SPI_ON(); + spi_write_read_byte(0x01); + /* and clear it! */ + spi_write_read_byte(val); + SPI_OFF(); +} + /* Request and read the manufacturer and device id of parts which * are compatible with the JEDEC standard (JEP106) and use that to * setup other operating conditions. @@ -351,6 +419,7 @@ static int spi_detect_part(void) switch (flash.manufacturer_id) { case JED_MANU_SPANSION: case JED_MANU_ST: + case JED_MANU_SST: case JED_MANU_WINBOND: for (i = 0; flash.manufacturer->flashes[i].name; ++i) { if (dev_id == flash.manufacturer->flashes[i].id) @@ -362,7 +431,11 @@ static int spi_detect_part(void) flash.flash = &flash.manufacturer->flashes[i]; flash.sector_size = flash.flash->sector_size; flash.num_sectors = flash.flash->num_sectors; - flash.write_length = 256; + + if (flash.manufacturer_id == JED_MANU_SST) + flash.write_length = 1; /* pwnt :( */ + else + flash.write_length = 256; break; case JED_MANU_ATMEL: { @@ -388,6 +461,10 @@ static int spi_detect_part(void) } } + /* the SST parts power up with software protection enabled by default */ + if (flash.manufacturer_id == JED_MANU_SST) + write_status_register(0); + called_init = 1; return 0; @@ -572,34 +649,6 @@ static int read_flash(unsigned long address, long count, uchar *buffer) return 0; } -static int enable_writing(void) -{ - ulong start; - - if (flash.manufacturer_id == JED_MANU_ATMEL) - return 0; - - /* A write enable instruction must previously have been executed */ - SPI_ON(); - spi_write_read_byte(0x06); - SPI_OFF(); - - /* The status register will be polled to check the write enable latch "WREN" */ - start = get_timer(0); - while (get_timer(0) - start < TIMEOUT) { - if (read_status_register() & 0x02) - return 0; - - if (ctrlc()) { - puts("\nAbort\n"); - return -1; - } - } - - puts("Timeout\n"); - return -1; -} - static long address_to_sector(unsigned long address) { if (address > (flash.num_sectors * flash.sector_size) - 1) -- 2.30.2