From efbb623debef3c63eebc9b849f6ca57130efa5f4 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Sat, 4 Feb 2023 10:52:29 +0300 Subject: [PATCH] ramips: add support for Huasifei WS1208V2 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with a Quectel RM520N-GL cellular modem which supports QMI and MBIM modes. Specifications: - MT7621AT, 256 MiB RAM, 16 MiB SPI Flash - MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN - Quectel RM520N-GL Cellular Modem - 2 WLAN & 4 Cellular Antennas - 5 Gigabit Ethernet Ports - 1 USB 2.0 port - 1 PCI-E Slot - 1 M.2 slot - 1 SIM card slot - 1 SD card slot Installation: - Install sysupgrade image via ROOter OS. TFTP Recovery: - Connect to serial console. - Boot initramfs image by choosing option 1 when U-Boot prompts. - Install sysupgrade image via OpenWrt. Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html Signed-off-by: Arınç ÜNAL --- .../ramips/dts/mt7621_huasifei_ws1208v2.dts | 185 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 12 ++ .../mt7621/base-files/etc/board.d/01_leds | 3 + 3 files changed, 200 insertions(+) create mode 100644 target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts diff --git a/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts new file mode 100644 index 0000000000..fe77f65207 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts @@ -0,0 +1,185 @@ +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "huasifei,ws1208v2", "mediatek,mt7621-soc"; + model = "Huasifei WS1208V2"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + button-reset { + label = "Reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: led-status { + label = "green:status"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + led-cellular { + label = "green:cellular"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + + led-wlan5g { + label = "green:wlan5g"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + led-wlan2g { + label = "green:wlan2g"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led-usb { + label = "green:usb"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + trigger-sources = <&xhci_ehci_port1>; + linux,default-trigger = "usbport"; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; + }; + + partition@50000 { + compatible = "denx,uimage"; + reg = <0x50000 0xfb0000>; + label = "firmware"; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci14c3,7603"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + led { + led-sources = <2>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + status = "okay"; + label = "wan"; + phy-handle = <ðphy4>; + + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&mdio { + ethphy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + + port@1 { + status = "okay"; + label = "lan2"; + }; + + port@2 { + status = "okay"; + label = "lan3"; + }; + + port@3 { + status = "okay"; + label = "lan4"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index d53f9a27aa..d295f2f8c7 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1068,6 +1068,18 @@ define Device/humax_e10 endef TARGET_DEVICES += humax_e10 +define Device/huasifei_ws1208v2 + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 16064k + DEVICE_VENDOR := Huasifei + DEVICE_MODEL := WS1208V2 + DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \ + kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \ + kmod-usb-serial-option +endef +TARGET_DEVICES += huasifei_ws1208v2 + define Device/iodata_wn-ax1167gr $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 211f1476ca..f54905cf5c 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -93,6 +93,9 @@ dlink,dir-882-r1) gnubee,gb-pc2) ucidef_set_led_netdev "ethyellow" "ethyellow" "orange:ethyellow" "ethyellow" "link tx rx" ;; +huasifei,ws1208v2) + ucidef_set_led_netdev "wwan0" "wwan0" "green:cellular" "wwan0" "link tx rx" + ;; keenetic,kn-3010) ucidef_set_led_netdev "internet" "internet" "green:internet" "wan" ;; -- 2.30.2